Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.9.1 Machine configuration directory is '/home/heiko/linuxcnc/configs/HMItest' Machine configuration file is 'HMItest.ini' INIFILE=/home/heiko/linuxcnc/configs/HMItest/HMItest.ini VERSION=1.1 PARAMETER_FILE=linuxcnc.var TPMOD= HOMEMOD= TASK=milltask HALUI=halui DISPLAY=axis COORDINATES=XYZ KINEMATICS=trivkins coordinates=XYZ Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod Found file(REL): ./HMItest.hal hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 10.10.10.10: INFO: Hardware address (MAC): 00:60:1b:16:83:34 hm2_eth: discovered 7I96S hm2/hm2_7i96s.0: Low Level init 0.15 hm2/hm2_7i96s.0: Smart Serial Firmware Version 43 Board hm2_7i96s.0.7i84.0.0 Hardware Mode 0 = standard Board hm2_7i96s.0.7i84.0.0 Software Mode 0 = input_output Board hm2_7i96s.0.7i84.0.0 Software Mode 1 = io_analog_fieldvoltage Board hm2_7i96s.0.7i84.0.0 Software Mode 2 = io_encoder_analog hm2/hm2_7i96s.0: 51 I/O Pins used: hm2/hm2_7i96s.0: IO Pin 000 (TB3-01): InM Input Module #0, pin in0 (Input) hm2/hm2_7i96s.0: IO Pin 001 (TB3-02): InM Input Module #0, pin in1 (Input) hm2/hm2_7i96s.0: IO Pin 002 (TB3-03): InM Input Module #0, pin in2 (Input) hm2/hm2_7i96s.0: IO Pin 003 (TB3-04): InM Input Module #0, pin in3 (Input) hm2/hm2_7i96s.0: IO Pin 004 (TB3-05): InM Input Module #0, pin in4 (Input) hm2/hm2_7i96s.0: IO Pin 005 (TB3-06): InM Input Module #0, pin in5 (Input) hm2/hm2_7i96s.0: IO Pin 006 (TB3-07): InM Input Module #0, pin in6 (Input) hm2/hm2_7i96s.0: IO Pin 007 (TB3-08): InM Input Module #0, pin in7 (Input) hm2/hm2_7i96s.0: IO Pin 008 (TB3-09): InM Input Module #0, pin in8 (Input) hm2/hm2_7i96s.0: IO Pin 009 (TB3-10): InM Input Module #0, pin in9 (Input) hm2/hm2_7i96s.0: IO Pin 010 (TB3-11): InM Input Module #0, pin in10 (Input) hm2/hm2_7i96s.0: IO Pin 011 (TB3-13/TB3-14): SSR #0, pin Out-00 (Output) hm2/hm2_7i96s.0: IO Pin 012 (TB3-15/TB3-16): SSR #0, pin Out-01 (Output) hm2/hm2_7i96s.0: IO Pin 013 (TB3-17/TB3-18): SSR #0, pin Out-02 (Output) hm2/hm2_7i96s.0: IO Pin 014 (TB3-19/TB3-20): SSR #0, pin Out-03 (Output) hm2/hm2_7i96s.0: IO Pin 015 (TB3-21/TB3-22): OutM Output Module #0, pin Out-04 (Output) hm2/hm2_7i96s.0: IO Pin 016 (TB3-23/TB3-24): OutM Output Module #0, pin Out-05 (Output) hm2/hm2_7i96s.0: IO Pin 017 (TB1-02/TB1-03): StepGen #0, pin Step (Output) hm2/hm2_7i96s.0: IO Pin 018 (TB1-04/TB1-05): StepGen #0, pin Direction (Output) hm2/hm2_7i96s.0: IO Pin 019 (TB1-08/TB1-09): StepGen #1, pin Step (Output) hm2/hm2_7i96s.0: IO Pin 020 (TB1-10/TB1-11): StepGen #1, pin Direction (Output) hm2/hm2_7i96s.0: IO Pin 021 (TB1-14/TB1-15): StepGen #2, pin Step (Output) hm2/hm2_7i96s.0: IO Pin 022 (TB1-16/TB1-17): StepGen #2, pin Direction (Output) hm2/hm2_7i96s.0: IO Pin 023 (TB1-20/TB1-21): StepGen #3, pin Step (Output) hm2/hm2_7i96s.0: IO Pin 024 (TB1-22-TB1-23): StepGen #3, pin Direction (Output) hm2/hm2_7i96s.0: IO Pin 025 (TB2-02/TB2-03): StepGen #4, pin Step (Output) hm2/hm2_7i96s.0: IO Pin 026 (TB2-04/TB2-05): StepGen #4, pin Direction (Output) hm2/hm2_7i96s.0: IO Pin 027 (TB2-07/TB2-08): IOPort hm2/hm2_7i96s.0: IO Pin 028 (TB2-10/TB2-11): IOPort hm2/hm2_7i96s.0: IO Pin 029 (TB2-13/TB2-14): IOPort hm2/hm2_7i96s.0: IO Pin 030 (TB2-16/TB2-17): Smart Serial Interface #0, pin rx0 (Input) hm2/hm2_7i96s.0: IO Pin 031 (TB2-18/TB2-19): Smart Serial Interface #0, pin tx0 (Output) hm2/hm2_7i96s.0: IO Pin 032 (internal): Smart Serial Interface #0, pin txen0 (Output) hm2/hm2_7i96s.0: IO Pin 033 (internal): SSR #0, pin AC Ref (internal) (Output) hm2/hm2_7i96s.0: IO Pin 034 (P1-01/DB25-01): IOPort hm2/hm2_7i96s.0: IO Pin 035 (P1-02/DB25-14): IOPort hm2/hm2_7i96s.0: IO Pin 036 (P1-03/DB25-02): IOPort hm2/hm2_7i96s.0: IO Pin 037 (P1-04/DB25-15): IOPort hm2/hm2_7i96s.0: IO Pin 038 (P1-05/DB25-03): IOPort hm2/hm2_7i96s.0: IO Pin 039 (P1-06/DB25-16): IOPort hm2/hm2_7i96s.0: IO Pin 040 (P1-07/DB25-04): IOPort hm2/hm2_7i96s.0: IO Pin 041 (P1-08/DB25-17): IOPort hm2/hm2_7i96s.0: IO Pin 042 (P1-09/DB25-05): IOPort hm2/hm2_7i96s.0: IO Pin 043 (P1-11/DB25-06): IOPort hm2/hm2_7i96s.0: IO Pin 044 (P1-13/DB25-07): Muxed Encoder Select #0, pin Mux Select 0 (Output) hm2/hm2_7i96s.0: IO Pin 045 (P1-15/DB25-08): Muxed Encoder #0, pin Muxed A (Input) hm2/hm2_7i96s.0: IO Pin 046 (P1-17/DB25-09): Muxed Encoder #0, pin MuFound file(REL): ./custom.hal Starting TASK program: milltask Starting DISPLAY program: axis g-file-error-quark: Datei »./HMItest.ui« konnte nicht geöffnet werden: Datei oder Verzeichnis nicht gefunden (4) Embeded tab command "halcmd loadusr -Wn gladevcp gladevcp -c gladevcp -x 54526380 -u ./hitcounter.py ./HMItest.ui" exited with error: 1 Shutting down and cleaning up LinuxCNC... Running HAL shutdown script task: 289 cycles, min=0.000009, max=0.013726, avg=0.009361, 0 latency excursions (> 10x expected cycle time of 0.010000s) xed B (Input) hm2/hm2_7i96s.0: IO Pin 047 (P1-19/DB25-10): Muxed Encoder #0, pin Muxed Index (Input) hm2/hm2_7i96s.0: IO Pin 048 (P1-21/DB25-11): IOPort hm2/hm2_7i96s.0: IO Pin 049 (P1-23/DB25-12): IOPort hm2/hm2_7i96s.0: IO Pin 050 (P1-25/DB25-13): IOPort hm2/hm2_7i96s.0: registered hm2_eth: in hm2_eth_reset hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime note: MAXV max: 25.000 units/sec 1500.000 units/min note: LJOG max: 25.000 units/sec 1500.000 units/min note: LJOG default: 6.000 units/sec 360.000 units/min note: jog_order='XYZ' note: jog_invert=set() [GladeVCP][INFO] Logging to: /home/heiko/gladevcp.log (logger.py:106) [GladeVCP.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No DEFAULT_SPINDLE_0_SPEED Entry in DISPLAY, Using: 200 (qt_istat.py:532) [GladeVCP.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_0_SPEED Entry in DISPLAY, Using: 100 (qt_istat.py:532) [GladeVCP.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_0_SPEED Entry in DISPLAY, Using: 2500 (qt_istat.py:532) [GladeVCP.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 1 (qt_istat.py:532) [GladeVCP.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 0.5 (qt_istat.py:532) [GladeVCP.QTVCP.QT_ISTAT][WARNING] Embedded tab configuration -invalid number of TAB_NAMES vs TAB_LOCATION - guessing default. (qt_istat.py:446) **** GLADE VCP ERROR: With xml file: ./HMItest.ui : 'gi.repository.Gtk' object has no attribute 'glade' :0: gladevcp exited without becoming ready 23229 23278 Stopping realtime threads Unloading hal components Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Fr 15. Dez 21:48:02 CET 2023 UTC Date: Fr 15. Dez 20:48:02 UTC 2023 this program: /usr/bin/linuxcnc_info uptime: 21:48:02 up 7:43, 1 user, load average: 1,18, 1,21, 1,39 lsb_release -sa: Debian Debian GNU/Linux 12 (bookworm) 12 bookworm linuxcnc: /usr/bin/linuxcnc pwd: /home/heiko/linuxcnc/configs/HMItest USER: heiko LOGNAME: heiko HOME: /home/heiko EDITOR: VISUAL: LANGUAGE: TERM: dumb COLORTERM: DISPLAY: :0.0 DESKTOP: lightdm-xsession display size: 1680x1050 pixels (444x277 millimeters) PATH: /usr/bin:/home/heiko/linuxcnc/configs/HMItest/bin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: cncDebian kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT_RT Debian 6.1.66-1 (2023-12-09) machine -m: x86_64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-6.1.0-15-rt-amd64 root=UUID=a433d21f-5ec3-4a4e-99e2-b6622a3eff81 ro initrd=/install/gtk/initrd.gz quiet model name: Intel(R) Core(TM) i5-4590T CPU @ 2.00GHz cores: 4 cpu MHz: 2178.668 parport: serial: 0000-0000 : serial Versions: gcc: gcc (Debian 12.2.0-14) 12.2.0 python: Python 3.11.2 git: not_in_PATH git commit: NA tcl: 8.6 tk: 8.6 glade: glade 3.40.0 linuxcnc_var all: LINUXCNCVERSION: 2.9.1 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /usr/lib/linuxcnc/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib PYTHON: /usr/bin/python3 dpkg -l '*linuxcnc*': Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten | Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/ Halb installiert/Trigger erWartet/Trigger anhängig |/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht) ||/ Name Version Architektur Beschreibung +++-===================-============-============-===================================================================== un linuxcnc (keine Beschreibung vorhanden) un linuxcnc-dev (keine Beschreibung vorhanden) un linuxcnc-doc (keine Beschreibung vorhanden) ii linuxcnc-doc-de 1:2.9.1 all motion controller for CNC machines and robots (German documentation) ii linuxcnc-doc-en 1:2.9.1 all motion controller for CNC machines and robots (English documentation) ii linuxcnc-doc-es 1:2.9.1 all controlador de movimiento para máquinas CNC y robots (Español). ii linuxcnc-doc-fr 1:2.9.1 all motion controller for CNC machines and robots (French documentation) un linuxcnc-sim (keine Beschreibung vorhanden) un linuxcnc-sim-dev (keine Beschreibung vorhanden) ii linuxcnc-uspace 1:2.9.1 amd64 motion controller for CNC machines and robots ii linuxcnc-uspace-dev 1:2.9.1 amd64 PC based motion controller for real-time Linux