Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.9.0~pre1+git20230208.f1270d6ed7 Machine configuration directory is '/home/student/linuxcnc/configs/mill' Machine configuration file is 'mill.ini' INIFILE=/home/student/linuxcnc/configs/mill/mill.ini VERSION=1.1 PARAMETER_FILE=linuxcnc.var TPMOD= HOMEMOD= TASK=milltask HALUI= DISPLAY=gmoccapy COORDINATES=X Y Z A KINEMATICS=trivkins coordinates=XYZA Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod Found file(REL): ./мой-станок.hal Found file(REL): ./custom.hal Starting TASK program: milltask Starting DISPLAY program: gmoccapy not enough values to unpack (expected 2, got 1) 'btn_sel_next' 'btn_sel_prev' 'btn_select' 'btn_home' 'btn_dir_up' 'btn_jump_to' not enough values to unpack (expected 2, got 1) not enough values to unpack (expected 2, got 1) 'IconFileSelection' object has no attribute 'on_btn_jump_to' not enough values to unpack (expected 2, got 1) not enough values to unpack (expected 2, got 1) Attribute error and sans 10 Attribute error and sans 10 0  =  /usr/bin/gmoccapy 1  =  -ini 2  =  /home/student/linuxcnc/configs/мой-станок/мой-станок.ini Entry = trivkins Entry = coordinates=XYZA found the following coordinates xyza **** GMOCCAPY GETINIINFO ****  Number of joints = 4 4 COORDINATES found = xyza joint 0 = axis x joint 1 = axis y joint 2 = axis z joint 3 = axis a {0: 'x', 1: 'y', 2: 'z', 3: 'a'} **** GMOCCAPY GETINIINFO ****  [KINS] KINESTYPE is trivkins **** GMOCCAPY GETINIINFO ****  No MAX_RAPID_OVERRIDE entry found in [DISPLAY] of INI file   Default settings 100 % applied! **** GMOCCAPY GETINIINFO ****  Preference file path: /home/student/linuxcnc/configs/мой-станок/мой-станок.pref **** GMOCCAPY GETINIINFO ****   No DEFAULT_SPINDLE_SPEED entry found in [DISPLAY] of INI file **** GMOCCAPY INFO **** **** no valid probe config in INI File **** **** disabled tool measurement **** **** GMOCCAPY INFO **** **** Entering make_DRO axis_list = ['x', 'y', 'z', 'a'] **** GMOCCAPY INFO **** **** Entering make ref axis button **** GMOCCAPY INFO **** **** Entering make touch button **** GMOCCAPY INFO **** **** Entering make jog increments **** GMOCCAPY INFO **** **** Entering make jog button **** GMOCCAPY INFO **** **** Entering make macro button found 0 Macros **** GMOCCAPY INFO **** **** arrange DRO 4 **** GMOCCAPY INFO **** **** Place in table **** GMOCCAPY INFO **** **** get DRO order **** GMOCCAPY INFO **** **** arrange JOG button less than 6 axis **** GMOCCAPY INFO **** **** Invalid embedded tab configuration **** **** No tabs will be added! **** Setting icon theme 'classic' **** GMOCCAPY INFO **** **** no audio available! **** **** PYGST library not installed? **** **** is python-gstX.XX installed? **** **** GMOCCAPY INFO **** **** Entering init gremlin **** Kinematics type changed _set_enable_tooltips =  True 'IconFileSelection' object has no attribute 'on_btn_jump_to' **** GMOCCAPY INFO **** **** No virtual keyboard installed, we checked for . **** try sudo apt-get install onboard **** GMOCCAPY GETINIINFO ****  Wrong entry [DISPLAY] CYCLE_TIME in INI File! Will use gmoccapy default 150 **** GMOCCAPY INFO : inifile = /home/student/linuxcnc/configs/mill/mill.ini ****: **** GMOCCAPY INFO : postgui halfile = ['postgui_call_list.hal'] ****: _kill_dynamic_childs Shutting down and cleaning up LinuxCNC... task: 218 cycles, min=0.000007, max=0.064008, avg=0.009504, 0 latency excursions (> 10x expected cycle time of 0.010000s) Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime [DEFAULT][INFO]  Logging to: /home/student/default.log (logger.py:107) [DEFAULT.QTVCP.QT_ISTAT][DEBUG]  Machine is METRIC based. unit Conversion constant=0.03937007874015748 (qt_istat.py:150) [DEFAULT.QTVCP.QT_ISTAT][DEBUG]  TRAJ COORDINATES: XYZA (qt_istat.py:161) [DEFAULT.QTVCP.QT_ISTAT][DEBUG]  DEFAULT_LINEAR_VELOCITY = 150.0 (qt_istat.py:341) [DEFAULT.QTVCP.QT_ISTAT][DEBUG]  MIN_LINEAR_VELOCITY = 0.0 (qt_istat.py:342) [DEFAULT.QTVCP.QT_ISTAT][DEBUG]  MAX_LINEAR_VELOCITY = 1500.0 (qt_istat.py:343) [DEFAULT.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No DEFAULT_SPINDLE_0_SPEED Entry in DISPLAY, Using: 200 (qt_istat.py:515) [DEFAULT.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MIN_SPINDLE_0_SPEED Entry in DISPLAY, Using: 100 (qt_istat.py:515) [DEFAULT.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MAX_SPINDLE_0_SPEED Entry in DISPLAY, Using: 2500 (qt_istat.py:515) [DEFAULT.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MAX_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 1 (qt_istat.py:515) [DEFAULT.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MIN_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 0.5 (qt_istat.py:515) (gmoccapy:5539): Gtk-CRITICAL **: 12:35:42.615: gtk_entry_set_text: assertion 'text != NULL' failed /usr/bin/gmoccapy:1011: DeprecationWarning: Gtk.Widget.override_background_color is deprecated   btn.override_background_color(Gtk.StateFlags.ACTIVE, Gdk.RGBA(1.0, 1.0, 0.0, 1.0)) /usr/bin/gmoccapy:1620: DeprecationWarning: Gtk.Table.resize is deprecated   self.widgets.tbl_DRO.resize(rows, cols) /usr/bin/gmoccapy:3377: DeprecationWarning: Gtk.FontButton.get_font_name is deprecated   self.notification.set_property('font', self.widgets.fontbutton_popup.get_font_name()) /usr/bin/gmoccapy:378: DeprecationWarning: Gtk.FontButton.set_font_name is deprecated   self.widgets.fontbutton_popup.set_font_name(self.prefs.getpref("message_font", "sans 10", str)) /usr/bin/gmoccapy:473: DeprecationWarning: Gtk.ColorButton.set_color is deprecated   self.widgets.abs_colorbutton.set_color(Gdk.color_parse(self.abs_color)) No input devices could be opened.  This usually indicates a misconfigured system.  Please read the section 'PERMISSIONS AND UDEV' in the hal_input manpage custom_postgui.hal:36: waitpid failed hal_input hal_input custom_postgui.hal:36: hal_input exited without becoming ready 5502 5536 Stopping realtime threads Unloading hal components Note: Using POSIX realtime