Starting LinuxCNC...
libnml/buffer/shmem.cc 320: Shared memory buffers toolCmd and toolCmd may conflict. (key=1004(0x3EC))
libnml/buffer/shmem.cc 320: Shared memory buffers toolSts and toolSts may conflict. (key=1005(0x3ED))
libnml/buffer/shmem.cc 320: Shared memory buffers emcError and emcError may conflict. (key=1003(0x3EB))
emc/iotask/ioControl.cc 786: can't load tool table.
linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod
Note: Using POSIX realtime
Found file(REL): ./2axis-WireEDM.hal
*** baxkins.comp setup ok
note: MAXV max: 12.000 units/sec 720.000 units/min
note: LJOG max: 12.000 units/sec 720.000 units/min
note: LJOG default: 100.000 units/sec 6000.000 units/min
aletter_for_jnum guessing 0 --> X
aletter_for_jnum guessing 1 --> Y
aletter_for_jnum guessing 2 --> Z
note: jog_order='XYZ'
note: jog_invert=set()
[QTvcp][DEBUG] DEBUGGING logging on (qtvcp:540)
[QTvcp.QTVCP.QT_ISTAT][DEBUG] Machine is METRIC based. unit Conversion constant=0.03937007874015748 (qt_istat.py:162)
[QTvcp.QTVCP.QT_ISTAT][DEBUG] TRAJ COORDINATES: XYZ (qt_istat.py:173)
[QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No DEFAULT_LINEAR_VELOCITY Entry in DISPLAY, Using: 25 (qt_istat.py:532)
[QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_LINEAR_VELOCITY Entry in DISPLAY, Using: 0 (qt_istat.py:532)
[QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_LINEAR_VELOCITY Entry in DISPLAY, Using: 125 (qt_istat.py:532)
[QTvcp.QTVCP.QT_ISTAT][DEBUG] DEFAULT_LINEAR_VELOCITY = 1500.0 (qt_istat.py:357)
[QTvcp.QTVCP.QT_ISTAT][DEBUG] MIN_LINEAR_VELOCITY = 0.0 (qt_istat.py:358)
[QTvcp.QTVCP.QT_ISTAT][DEBUG] MAX_LINEAR_VELOCITY = 7500.0 (qt_istat.py:359)
[QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No DEFAULT_SPINDLE_0_SPEED Entry in DISPLAY, Using: 200 (qt_istat.py:532)
[QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_0_SPEED Entry in DISPLAY, Using: 100 (qt_istat.py:532)
[QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_0_SPEED Entry in DISPLAY, Using: 2500 (qt_istat.py:532)
[QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 1 (qt_istat.py:532)
[QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 0.5 (qt_istat.py:532)
[QTvcp.QTVCP.QT_ISTAT][WARNING] Embedded tab configuration -invalid number of TAB_NAMES vs TAB_LOCATION - guessing default. (qt_istat.py:446)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Passed name=baxedm4, BASENAME=baxedm4 BASEPATH=baxedm4 (qt_pstat.py:100)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for handler file in: /home/kurt/linuxcnc/configs/BaxEDM-2axis-WireEDM/qtvcp/panels/baxedm4/baxedm4_handler.py (qt_pstat.py:124)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for handler file in: /home/kurt/linuxcnc/configs/BaxEDM-2axis-WireEDM/baxedm4_handler.py (qt_pstat.py:124)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for default handler file in: /usr/share/qtvcp/panels/baxedm4/baxedm4_handler.py (qt_pstat.py:131)
[QTvcp.QTVCP.QT_PSTAT][INFO] No handler file found. (qt_pstat.py:137)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .ui in: /home/kurt/linuxcnc/configs/BaxEDM-2axis-WireEDM/qtvcp/panels/baxedm4/baxedm4.ui (qt_pstat.py:157)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .ui in: /home/kurt/linuxcnc/configs/BaxEDM-2axis-WireEDM/baxedm4.ui (qt_pstat.py:157)
[QTvcp.QTVCP.QT_PSTAT][INFO] Using LOCAL ui file from: /home/kurt/linuxcnc/configs/BaxEDM-2axis-WireEDM/baxedm4.ui (qt_pstat.py:159)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qss in: /home/kurt/linuxcnc/configs/BaxEDM-2axis-WireEDM/qtvcp/panels/baxedm4/baxedm4.qss (qt_pstat.py:201)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qss in: /home/kurt/linuxcnc/configs/BaxEDM-2axis-WireEDM/baxedm4.qss (qt_pstat.py:201)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qss in: /usr/share/qtvcp/panels/baxedm4/baxedm4.qss (qt_pstat.py:208)
[QTvcp.QTVCP.QT_PSTAT][INFO] No qss file found. (qt_pstat.py:214)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qrc in: /home/kurt/linuxcnc/configs/BaxEDM-2axis-WireEDM/qtvcp/panels/baxedm4/baxedm4.qrc (qt_pstat.py:230)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qrc in: /home/kurt/linuxcnc/configs/BaxEDM-2axis-WireEDM/baxedm4.qrc (qt_pstat.py:230)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qrc in: /usr/share/qtvcp/panels/baxedm4/baxedm4.qrc (qt_pstat.py:238)
[QTvcp.QTVCP.QT_PSTAT][INFO] No qrc file found. (qt_pstat.py:245)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for resources.py in: /home/kurt/linuxcnc/configs/BaxEDM-2axis-WireEDM/qtvcp/panels/resources.py (qt_pstat.py:255)
[QTvcp.QTVCP.QT_PSTAT][INFO] No resources.py file found, no QRC file to compile one from. (qt_pstat.py:266)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for translation file in: /home/kurt/linuxcnc/configs/BaxEDM-2axis-WireEDM/qtvcp/screens/baxedm4/baxedm4.qrc (qt_pstat.py:277)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for translation file in: /home/kurt/linuxcnc/configs/BaxEDM-2axis-WireEDM/baxedm4/languages/baxedm4_en.qm (qt_pstat.py:277)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for translation file in: /usr/share/qtvcp/screens/baxedm4/languages/baxedm4_en.qm (qt_pstat.py:284)
[QTvcp.QTVCP.QT_PSTAT][INFO] Using no translations, default system locale is: en (qt_pstat.py:289)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for LOCAL about file in: /home/kurt/linuxcnc/configs/BaxEDM-2axis-WireEDM/baxedm4_ABOUT (qt_pstat.py:305)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for LOCAL about file in: /home/kurt/linuxcnc/configs/BaxEDM-2axis-WireEDM/qtvcp/panels/baxedm4_ABOUT (qt_pstat.py:305)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for DEFAULT about file in: /usr/share/qtvcp/panels/baxedm4/baxedm4_ABOUT (qt_pstat.py:311)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] No about file found. (qt_pstat.py:317)
[QTvcp][INFO] Building A VCP Panel with: Python 3 (qtvcp:197)
[QTvcp][INFO] No handler file specified - using: None (qtvcp:200)
[QTvcp.QTVCP.QT_MAKEGUI][INFO] Qsettings file path: /home/kurt/.config/QtVcp/baxedm4.conf (qt_makegui.py:98)
[QTvcp.QTVCP.QT_MAKEGUI][INFO] No resource file to load: None (qt_makegui.py:196)
[QTvcp.QTVCP.QT_MAKEPINS][DEBUG] QTVCP: Parsing for HAL widgets. (qt_makepins.py:144)
[QTvcp.QTVCP.QT_TSTAT][DEBUG] Toolfile does not exist' lathe.tbl (qt_tstat.py:113)
[QTvcp][DEBUG] Set HAL ready. (qtvcp:323)

[QTvcp][CRITICAL] Forwarding events to AXIS is not well tested yet. (qtvcp:332)
[QTvcp][DEBUG] Show window. (qtvcp:380)
[QTvcp.QTVCP.QT_MAKEPINS][INFO] No preference file - cannot set preference geometry. (qt_makepins.py:191)
task: main loop took 0.011310 seconds
[QTvcp][INFO] Preference path: None (qtvcp:416)
task: main loop took 0.011838 seconds
task: main loop took 0.018593 seconds
task: main loop took 0.047782 seconds
task: main loop took 0.011432 seconds