[ 1.560211] zswap: loaded using pool lzo/zbud [ 1.560644] Key type .fscrypt registered [ 1.560645] Key type fscrypt-provisioning registered [ 1.565233] Key type encrypted registered [ 1.565236] AppArmor: AppArmor sha1 policy hashing enabled [ 1.565245] ima: Allocated hash algorithm: sha256 [ 1.614896] ima: No architecture policies found [ 1.614928] evm: Initialising EVM extended attributes: [ 1.614929] evm: security.selinux [ 1.614931] evm: security.SMACK64 (disabled) [ 1.614932] evm: security.SMACK64EXEC (disabled) [ 1.614933] evm: security.SMACK64TRANSMUTE (disabled) [ 1.614934] evm: security.SMACK64MMAP (disabled) [ 1.614935] evm: security.apparmor [ 1.614936] evm: security.ima [ 1.614937] evm: security.capability [ 1.614938] evm: HMAC attrs: 0x1 [ 1.710845] clk: Disabling unused clocks [ 1.711823] Freeing unused decrypted memory: 2036K [ 1.712296] Freeing unused kernel image (initmem) memory: 2792K [ 1.712385] Write protecting the kernel read-only data: 26624k [ 1.713071] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 1.713414] Freeing unused kernel image (rodata/data gap) memory: 1204K [ 1.755932] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.755933] x86/mm: Checking user space page tables [ 1.796599] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.796603] Run /init as init process [ 1.796604] with arguments: [ 1.796605] /init [ 1.796606] with environment: [ 1.796606] HOME=/ [ 1.796607] TERM=linux [ 1.796607] BOOT_IMAGE=/boot/vmlinuz-6.1.0-30-rt-amd64 [ 1.904187] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.904224] ACPI: button: Sleep Button [SLPB] [ 1.904298] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 1.904373] ACPI: button: Power Button [PWRB] [ 1.904424] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 1.920046] dca service started, version 1.12.1 [ 1.920699] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 1.920778] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 1.922167] ACPI: button: Power Button [PWRF] [ 1.922397] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 1.923163] i2c i2c-0: Successfully instantiated SPD at 0x52 [ 1.932334] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.932336] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.936087] SCSI subsystem initialized [ 1.942592] ACPI: bus type USB registered [ 1.942640] usbcore: registered new interface driver usbfs [ 1.942652] usbcore: registered new interface driver hub [ 1.942666] usbcore: registered new device driver usb [ 1.956473] ACPI: bus type drm_connector registered [ 1.961023] pps pps0: new PPS source ptp0 [ 1.961094] igb 0000:01:00.0: added PHC on eth0 [ 1.961112] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 1.961113] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:e0:97:1d:d4:35 [ 1.961115] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF [ 1.961116] igb 0000:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 1.964970] libata version 3.00 loaded. [ 1.974704] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.974711] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.975692] ahci 0000:00:17.0: version 3.0 [ 1.975869] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 [ 1.976370] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.976374] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.976376] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.976409] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.976411] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.976412] usb usb1: Product: xHCI Host Controller [ 1.976413] usb usb1: Manufacturer: Linux 6.1.0-30-rt-amd64 xhci-hcd [ 1.976414] usb usb1: SerialNumber: 0000:00:14.0 [ 1.976630] hub 1-0:1.0: USB hub found [ 1.976644] hub 1-0:1.0: 12 ports detected [ 1.978546] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 1.978549] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.978550] usb usb2: Product: xHCI Host Controller [ 1.978551] usb usb2: Manufacturer: Linux 6.1.0-30-rt-amd64 xhci-hcd [ 1.978552] usb usb2: SerialNumber: 0000:00:14.0 [ 1.978700] hub 2-0:1.0: USB hub found [ 1.978710] hub 2-0:1.0: 6 ports detected [ 1.986064] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x7 impl SATA mode [ 1.986067] ahci 0000:00:17.0: flags: 64bit ncq led clo only pio slum part deso sadm sds apst [ 1.986870] scsi host0: ahci [ 1.987174] scsi host1: ahci [ 1.987320] scsi host2: ahci [ 1.987371] ata1: SATA max UDMA/133 abar m2048@0xdf73b000 port 0xdf73b100 irq 135 [ 1.987374] ata2: SATA max UDMA/133 abar m2048@0xdf73b000 port 0xdf73b180 irq 135 [ 1.987375] ata3: SATA max UDMA/133 abar m2048@0xdf73b000 port 0xdf73b200 irq 135 [ 1.989753] pps pps1: new PPS source ptp1 [ 1.989800] igb 0000:02:00.0: added PHC on eth1 [ 1.989820] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection [ 1.989821] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:e0:97:1d:d4:36 [ 1.989825] igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF [ 1.989826] igb 0000:02:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 2.234247] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 2.302816] ata2: SATA link down (SStatus 4 SControl 300) [ 2.302851] ata1: SATA link down (SStatus 4 SControl 300) [ 2.302945] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.305207] ata3.00: ATA-10: GN512, U0510A0, max UDMA/133 [ 2.306545] ata3.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.312095] ata3.00: configured for UDMA/133 [ 2.312495] scsi 2:0:0:0: Direct-Access ATA GN512 0A0 PQ: 0 ANSI: 5 [ 2.355942] sd 2:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) [ 2.355994] sd 2:0:0:0: [sda] Write Protect is off [ 2.355998] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.356029] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.356059] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.357948] sda: sda1 sda2 sda3 [ 2.358167] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.362233] igb 0000:01:00.0 enp1s0: renamed from eth0 [ 2.383624] usb 1-2: New USB device found, idVendor=2109, idProduct=2812, bcdDevice=90.40 [ 2.383627] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.383628] usb 1-2: Product: USB2.0 Hub [ 2.383629] usb 1-2: Manufacturer: VIA Labs, Inc. [ 2.384312] hub 1-2:1.0: USB hub found [ 2.384607] hub 1-2:1.0: 4 ports detected [ 2.418218] igb 0000:02:00.0 enp2s0: renamed from eth1 [ 2.510287] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd [ 2.655643] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 2.655779] Console: switching to colour dummy device 80x25 [ 2.655818] i915 0000:00:02.0: vgaarb: deactivate vga console [ 2.655844] i915 0000:00:02.0: [drm] Transparent Hugepage support is recommended for optimal performance when IOMMU is enabled! [ 2.656883] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.656922] i915 0000:00:02.0: firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin [ 2.657214] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 2.763225] usb 2-2: New USB device found, idVendor=2109, idProduct=0812, bcdDevice=90.41 [ 2.763228] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.763230] usb 2-2: Product: USB3.0 Hub [ 2.763231] usb 2-2: Manufacturer: VIA Labs, Inc. [ 2.764196] hub 2-2:1.0: USB hub found [ 2.764608] hub 2-2:1.0: 4 ports detected [ 2.894131] usb 1-9: new full-speed USB device number 3 using xhci_hcd [ 2.926671] i915 0000:00:02.0: [drm] failed to retrieve link info, disabling eDP [ 3.047154] usb 1-9: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01 [ 3.047157] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.142136] usb 1-2.1: new full-speed USB device number 4 using xhci_hcd [ 3.196390] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 3.198660] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.199004] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 3.246355] Registered IR keymap rc-cec [ 3.246400] rc rc0: DP-1 as /devices/pci0000:00/0000:00:02.0/rc/rc0 [ 3.246473] input: DP-1 as /devices/pci0000:00/0000:00:02.0/rc/rc0/input7 [ 3.252610] fbcon: i915drmfb (fb0) is primary device [ 3.258005] usb 1-2.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11 [ 3.258011] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.258015] usb 1-2.1: Product: USB Receiver [ 3.258018] usb 1-2.1: Manufacturer: Logitech [ 3.280787] hid: raw HID events driver (C) Jiri Kosina [ 3.358171] usb 1-2.3: new high-speed USB device number 5 using xhci_hcd [ 3.511687] Console: switching to colour frame buffer device 240x67 [ 3.533177] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 3.579406] usbcore: registered new interface driver usbhid [ 3.579412] usbhid: USB HID core driver [ 3.585654] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:046D:C52B.0001/input/input8 [ 3.750692] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-2.1/input0 [ 3.751451] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:046D:C52B.0002/input/input9 [ 3.751923] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:046D:C52B.0002/input/input10 [ 3.797724] usb 1-2.3: New USB device found, idVendor=1bcf, idProduct=2281, bcdDevice= 1.11 [ 3.797738] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.797744] usb 1-2.3: Product: SPCA2281 Web Camera [ 3.797748] usb 1-2.3: Manufacturer: Sunplus IT Co [ 3.810517] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:046D:C52B.0002/input/input11 [ 3.811083] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2.1/input1 [ 3.811955] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2.1/input2 [ 4.118308] usb 1-2.4: new full-speed USB device number 6 using xhci_hcd [ 4.132788] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2.1/input2 [ 4.233437] usb 1-2.4: not running at top speed; connect to a high speed hub [ 4.246391] usb 1-2.4: New USB device found, idVendor=0457, idProduct=10e1, bcdDevice= 4.00 [ 4.246405] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.246411] usb 1-2.4: Product: SiS HID Touch Controller [ 4.246415] usb 1-2.4: Manufacturer: USBest Technology [ 4.253353] input: Logitech Wireless Device PID:404d Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input13 [ 4.257589] input: USBest Technology SiS HID Touch Controller Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:0457:10E1.0005/input/input18 [ 4.410709] input: Logitech Wireless Device PID:404d Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input14 [ 4.411279] hid-generic 0003:0457:10E1.0005: input,hiddev1,hidraw1: USB HID v1.11 Device [USBest Technology SiS HID Touch Controller] on usb-0000:00:14.0-2.4/input0 [ 4.411457] hid-generic 0003:046D:404D.0004: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:404d] on usb-0000:00:14.0-2.1/input2:1 [ 4.659987] input: USBest Technology SiS HID Touch Controller as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:0457:10E1.0005/input/input20 [ 4.679250] hid-multitouch 0003:0457:10E1.0005: input,hiddev1,hidraw1: USB HID v1.11 Device [USBest Technology SiS HID Touch Controller] on usb-0000:00:14.0-2.4/input0 [ 4.686342] input: Logitech K400 Plus as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input22 [ 4.818884] logitech-hidpp-device 0003:046D:404D.0004: input,hidraw2: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:14.0-2.1/input2:1 [ 4.938437] PM: Image not found (code -22) [ 5.110603] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [ 5.227432] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 5.409018] systemd[1]: Inserted module 'autofs4' [ 5.536756] systemd[1]: systemd 252.39-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 5.536764] systemd[1]: Detected architecture x86-64. [ 5.539604] systemd[1]: Hostname set to . [ 5.781470] systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly. [ 5.832087] systemd[1]: Queued start job for default target graphical.target. [ 5.868860] systemd[1]: Created slice machine.slice - Virtual Machine and Container Slice. [ 5.871214] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 5.872429] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 5.873647] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 5.874783] systemd[1]: Created slice user.slice - User and Session Slice. [ 5.875094] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 5.875766] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 5.875857] systemd[1]: Expecting device dev-disk-by\x2duuid-03638461\x2d7e41\x2d4768\x2d995a\x2dcb547f95bffe.device - /dev/disk/by-uuid/03638461-7e41-4768-995a-cb547f95bffe... [ 5.875886] systemd[1]: Expecting device dev-disk-by\x2duuid-8DB5\x2d4C71.device - /dev/disk/by-uuid/8DB5-4C71... [ 5.875969] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 5.876076] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 5.876114] systemd[1]: Reached target slices.target - Slice Units. [ 5.876192] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 5.876245] systemd[1]: Reached target virt-guest-shutdown.target - Libvirt guests shutdown. [ 5.876555] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. [ 5.878578] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. [ 5.879034] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 5.879286] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 5.880421] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ 5.880993] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 5.881562] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 5.882532] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 5.882979] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 5.886066] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 5.889263] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 5.892550] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 5.895730] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 5.896265] systemd[1]: Finished blk-availability.service - Availability of block devices. [ 5.900081] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 5.902522] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 5.904519] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 5.906511] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 5.908717] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 5.910762] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 5.912625] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 5.914570] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 5.916652] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 5.916839] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 5.919503] systemd[1]: Starting systemd-journald.service - Journal Service... [ 5.923835] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 5.925038] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 5.926203] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 5.928263] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 5.928589] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 5.928880] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 5.929164] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 5.929634] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 5.929877] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 5.929916] device-mapper: uevent: version 1.0.3 [ 5.930003] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 5.930326] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 5.930538] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 5.930916] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 5.931114] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 5.931262] fuse: init (API version 7.38) [ 5.931564] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 5.931795] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 5.932254] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 5.932428] loop: module loaded [ 5.932452] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 5.932809] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 5.932952] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 5.933315] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 5.933507] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 5.935292] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 5.936396] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 5.936527] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 5.937988] EXT4-fs (sda2): re-mounted. Quota mode: none. [ 5.939769] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 5.940071] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 5.940303] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 5.940503] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ 5.940549] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 5.941654] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... [ 5.942730] systemd[1]: Starting systemd-sysusers.service - Create System Users... [ 5.954047] lp: driver loaded but no devices found [ 5.958424] systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed. [ 5.958713] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ 5.958808] ppdev: user-space parallel port driver [ 5.961046] parport_pc 00:04: reported by Plug and Play ACPI [ 5.961129] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE,EPP] [ 5.982546] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. [ 5.987977] systemd[1]: Finished systemd-sysusers.service - Create System Users. [ 5.989705] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... [ 6.033028] systemd[1]: Finished lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 6.036928] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. [ 6.037157] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. [ 6.038219] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... [ 6.058372] lp0: using parport0 (interrupt-driven). [ 6.060711] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 6.062484] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 6.083767] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices. [ 6.114574] systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown... [ 6.114781] systemd[1]: Started systemd-journald.service - Journal Service. [ 6.123179] systemd-journald[339]: Received client request to flush runtime journal. [ 6.361048] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 6.374395] intel_pmc_core INT33A1:00: initialized [ 6.447882] input: PC Speaker as /devices/platform/pcspkr/input/input23 [ 6.483135] Adding 999420k swap on /dev/sda3. Priority:-2 extents:1 across:999420k SSFS [ 6.495459] ee1004 0-0052: 512 byte EE1004-compliant SPD EEPROM, read-only [ 6.541543] mc: Linux media interface: v0.10 [ 6.542830] mei_me 0000:00:16.0: enabling device (0004 -> 0006) [ 6.560189] iTCO_vendor_support: vendor-support=0 [ 6.564570] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 6.573254] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 6.573257] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 6.573258] RAPL PMU: hw unit of domain package 2^-14 Joules [ 6.573259] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 6.573260] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 6.575441] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400) [ 6.575561] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 6.575834] videodev: Linux video capture interface: v2.00 [ 6.580096] cryptd: max_cpu_qlen set to 1000 [ 6.625771] AVX2 version of gcm_enc/dec engaged. [ 6.625819] AES CTR mode by8 optimization enabled [ 6.626687] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.626865] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 6.627005] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 6.627140] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.627331] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 6.641665] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 6.642773] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 6.664465] Intel(R) Wireless WiFi driver for Linux [ 6.664529] iwlwifi 0000:03:00.0: enabling device (0000 -> 0002) [ 6.674345] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-7265D-29.ucode [ 6.674360] iwlwifi 0000:03:00.0: Found debug destination: EXTERNAL_DRAM [ 6.674362] iwlwifi 0000:03:00.0: Found debug configuration: 0 [ 6.674563] iwlwifi 0000:03:00.0: loaded firmware version 29.4063824552.0 7265D-29.ucode op_mode iwlmvm [ 6.676509] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 6.677182] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 6.746478] usb 1-2.3: set resolution quirk: cval->res = 16 [ 6.746669] usbcore: registered new interface driver snd-usb-audio [ 6.749814] Bluetooth: Core ver 2.22 [ 6.749845] NET: Registered PF_BLUETOOTH protocol family [ 6.749846] Bluetooth: HCI device and connection manager initialized [ 6.749850] Bluetooth: HCI socket layer initialized [ 6.749852] Bluetooth: L2CAP socket layer initialized [ 6.749858] Bluetooth: SCO socket layer initialized [ 6.752732] usb 1-2.3: Found UVC 1.00 device SPCA2281 Web Camera (1bcf:2281) [ 6.786741] input: SPCA2281 Web Camera : SPCA2281 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/input/input24 [ 6.786800] usbcore: registered new interface driver uvcvideo [ 6.836508] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210 [ 6.836899] thermal thermal_zone3: failed to read out thermal zone (-61) [ 6.850888] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [ 6.851125] iwlwifi 0000:03:00.0: Allocated 0x00400000 bytes for firmware monitor. [ 6.855653] iwlwifi 0000:03:00.0: base HW address: f4:4e:e3:ac:30:14, OTP minor version: 0x0 [ 6.857504] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC897: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 6.857507] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.857509] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 6.857512] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 6.857513] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 6.857514] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 6.857515] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 6.880501] intel_rapl_common: Found RAPL domain package [ 6.880503] intel_rapl_common: Found RAPL domain core [ 6.880504] intel_rapl_common: Found RAPL domain uncore [ 6.880504] intel_rapl_common: Found RAPL domain dram [ 6.884858] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card1/input25 [ 6.884927] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card1/input26 [ 6.884997] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input27 [ 6.885061] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input28 [ 6.885124] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input29 [ 6.958344] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 6.970662] usbcore: registered new interface driver btusb [ 6.985525] Bluetooth: hci0: Legacy ROM 2.5 revision 1.0 build 3 week 17 2014 [ 6.985533] Bluetooth: hci0: Intel device is already patched. patch num: 32 [ 6.998355] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0 [ 7.107301] audit: type=1400 audit(1767944833.093:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=638 comm="apparmor_parser" [ 7.108663] audit: type=1400 audit(1767944833.093:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=639 comm="apparmor_parser" [ 7.108675] audit: type=1400 audit(1767944833.093:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=639 comm="apparmor_parser" [ 7.109533] audit: type=1400 audit(1767944833.093:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=641 comm="apparmor_parser" [ 7.109549] audit: type=1400 audit(1767944833.093:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=641 comm="apparmor_parser" [ 7.109557] audit: type=1400 audit(1767944833.093:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=641 comm="apparmor_parser" [ 7.109937] audit: type=1400 audit(1767944833.093:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=643 comm="apparmor_parser" [ 7.111645] audit: type=1400 audit(1767944833.097:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="virt-aa-helper" pid=642 comm="apparmor_parser" [ 7.120294] audit: type=1400 audit(1767944833.105:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirtd" pid=645 comm="apparmor_parser" [ 7.120307] audit: type=1400 audit(1767944833.105:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirtd//qemu_bridge_helper" pid=645 comm="apparmor_parser" [ 7.381415] ec_master: loading out-of-tree module taints kernel. [ 7.381665] ec_master: module verification failed: signature and/or required key missing - tainting kernel [ 7.399738] EtherCAT: Master driver 1.6.8 1.6.8.g2543cc5-1+27.2 [ 7.399832] EtherCAT: 1 master waiting for devices. [ 7.426745] igb 0000:02:00.0: removed PHC on enp2s0 [ 7.643107] NET: Registered PF_QIPCRTR protocol family [ 7.698442] igb 0000:01:00.0: removed PHC on enp1s0 [ 7.948901] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 8.141127] ec_igb: Intel(R) Gigabit Ethernet Network Driver (EtherCAT enabled) [ 8.141132] ec_igb: Copyright (c) 2007-2014 Intel Corporation. [ 8.183451] pps pps0: new PPS source ptp0 [ 8.183521] ec_igb 0000:01:00.0: added PHC on eth0 [ 8.183523] ec_igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 8.183525] ec_igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:e0:97:1d:d4:35 [ 8.183529] ec_igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF [ 8.183531] ec_igb 0000:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 8.214342] ec_igb 0000:01:00.0 enp1s0: renamed from eth0 [ 8.230876] EtherCAT: Accepting 00:E0:97:1D:D4:36 as main device for master 0. [ 8.257138] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 8.257377] pps pps1: new PPS source ptp1 [ 8.257471] ec_igb 0000:02:00.0: added PHC on ecm0 [ 8.257474] ec_igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection [ 8.257477] ec_igb 0000:02:00.0: ecm0: (PCIe:2.5Gb/s:Width x1) 00:e0:97:1d:d4:36 [ 8.257481] ec_igb 0000:02:00.0: ecm0: PBA No: FFFFFF-0FF [ 8.257483] ec_igb 0000:02:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 8.282730] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [ 8.361987] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [ 8.363296] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring [ 8.507536] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [ 8.586286] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM [ 8.587622] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring [ 8.971531] L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details. [ 10.258780] EtherCAT 0: Link state of ecm0 changed to UP. [ 10.266284] EtherCAT 0: 5 slave(s) responding on main device. Re-scanning on next possibility. [ 10.266288] EtherCAT 0: Slave states on main device: PREOP. [ 10.266289] EtherCAT 0: Re-scanning now. [ 10.266352] EtherCAT 0: Scanning bus. [ 10.370693] ec_igb 0000:01:00.0 enp1s0: igb: enp1s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 10.370810] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready [ 10.374100] br1: port 1(enp1s0) entered blocking state [ 10.374113] br1: port 1(enp1s0) entered disabled state [ 10.374451] device enp1s0 entered promiscuous mode [ 10.374626] br1: port 1(enp1s0) entered blocking state [ 10.374629] br1: port 1(enp1s0) entered listening state [ 10.501081] EtherCAT 0: Bus scanning completed in 232 ms. [ 10.501084] EtherCAT 0: Using slave 0 as DC reference clock. [ 10.501085] EtherCAT ERROR 0: Failed to calculate bus topology. [ 10.501087] EtherCAT 0: Starting EoE thread. [ 12.359464] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 12.359472] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 12.359474] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 12.359476] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 12.537681] wlp3s0: authenticate with 40:ae:30:c1:a5:cc [ 12.537727] wlp3s0: 80 MHz not supported, disabling VHT [ 12.542722] wlp3s0: send auth to 40:ae:30:c1:a5:cc (try 1/3) [ 12.547890] wlp3s0: authenticated [ 12.550283] wlp3s0: associate with 40:ae:30:c1:a5:cc (try 1/3) [ 12.561932] wlp3s0: RX AssocResp from 40:ae:30:c1:a5:cc (capab=0x1c11 status=0 aid=2) [ 12.565632] wlp3s0: associated [ 12.656100] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 40:ae:30:c1:a5:cc [ 12.822788] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 22.892117] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 22.892125] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 22.892127] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 22.892130] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 24.121310] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 24.121318] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 24.121320] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 24.121323] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 24.530929] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 24.530935] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 24.530937] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 24.530939] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 25.247717] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 25.247723] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 25.247725] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 25.247727] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 25.418174] br1: port 1(enp1s0) entered learning state [ 26.374159] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 26.374165] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 26.374167] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 26.374169] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 26.476546] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 26.476551] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 26.476553] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 26.476554] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 28.729397] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 28.729403] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 28.729405] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 28.729408] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 29.241407] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 29.241413] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 29.241415] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 29.241417] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 30.026389] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 30.026396] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 30.026397] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 30.026399] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 31.006614] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 31.006619] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 31.006621] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 31.006623] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 32.518313] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 32.518319] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 32.518320] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 32.518322] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 33.439908] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 33.439914] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 33.439915] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 33.439917] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 33.747106] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 33.747111] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 33.747113] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 33.747114] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 34.361504] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 34.361509] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 34.361511] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 34.361512] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 36.307149] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 36.307155] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 36.307156] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 36.307158] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 39.072076] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 39.072082] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 39.072084] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 39.072085] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 39.276852] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 39.276858] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 39.276859] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 39.276861] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 39.358277] EtherCAT ERROR 0-3: Mailbox error response received - Unknown error reply code 0x0000. [ 39.358279] EtherCAT WARNING 0-3: Invalid mailbox response for eoe0s3. [ 39.379242] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 39.379248] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 39.379249] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 39.379251] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 39.454267] EtherCAT ERROR 0-3: Mailbox error response received - Unknown error reply code 0x0000. [ 39.454269] EtherCAT WARNING 0-3: Invalid mailbox response for eoe0s3. [ 39.998254] EtherCAT WARNING 0-3: Other mailbox protocol response for eoe0s3. [ 39.998310] EtherCAT ERROR 0-3: Reception of CoE SDO description response failed: No response. [ 40.096065] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 40.096072] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 40.096073] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 40.096075] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 40.198480] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 40.198486] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 40.198487] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 40.198489] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 40.390261] EtherCAT ERROR 0-4: Mailbox error response received - Unknown error reply code 0x0000. [ 40.390263] EtherCAT WARNING 0-4: Invalid mailbox response for eoe0s4. [ 40.406259] EtherCAT ERROR 0-4: Mailbox error response received - Unknown error reply code 0x0000. [ 40.406261] EtherCAT WARNING 0-4: Invalid mailbox response for eoe0s4. [ 40.486271] EtherCAT ERROR 0-4: Mailbox error response received - Unknown error reply code 0x0000. [ 40.486273] EtherCAT WARNING 0-4: Invalid mailbox response for eoe0s4. [ 40.522168] br1: port 1(enp1s0) entered forwarding state [ 40.522170] br1: topology change detected, propagating [ 40.522185] IPv6: ADDRCONF(NETDEV_CHANGE): br1: link becomes ready [ 40.570282] EtherCAT ERROR 0-4: Mailbox error response received - Unknown error reply code 0x0000. [ 40.570285] EtherCAT WARNING 0-4: Invalid mailbox response for eoe0s4. [ 40.634287] EtherCAT ERROR 0-4: Mailbox error response received - Unknown error reply code 0x0000. [ 40.634289] EtherCAT WARNING 0-4: Invalid mailbox response for eoe0s4. [ 40.906270] EtherCAT ERROR 0-4: Mailbox error response received - Unknown error reply code 0x0000. [ 40.906272] EtherCAT WARNING 0-4: Invalid mailbox response for eoe0s4. [ 40.986256] EtherCAT ERROR 0-4: Mailbox error response received - Unknown error reply code 0x0000. [ 40.986258] EtherCAT WARNING 0-4: Invalid mailbox response for eoe0s4. [ 41.050269] EtherCAT ERROR 0-4: Mailbox error response received - Unknown error reply code 0x0000. [ 41.050271] EtherCAT WARNING 0-4: Invalid mailbox response for eoe0s4. [ 41.066272] EtherCAT ERROR 0-4: Mailbox error response received - Unknown error reply code 0x0000. [ 41.066274] EtherCAT WARNING 0-4: Invalid mailbox response for eoe0s4. [ 41.114284] EtherCAT ERROR 0-4: Mailbox error response received - Unknown error reply code 0x0000. [ 41.114286] EtherCAT WARNING 0-4: Invalid mailbox response for eoe0s4. [ 41.146280] EtherCAT ERROR 0-4: Mailbox error response received - Unknown error reply code 0x0000. [ 41.146282] EtherCAT WARNING 0-4: Invalid mailbox response for eoe0s4. [ 41.178259] EtherCAT WARNING 0-4: Other mailbox protocol response for eoe0s4. [ 41.178311] EtherCAT ERROR 0-4: Reception of CoE SDO description response failed: No response. [ 47.571541] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 47.571561] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 47.571567] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 47.571575] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 48.390797] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 48.390818] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 48.390824] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 48.390831] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 48.595529] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 48.595549] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 48.595555] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 48.595563] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 49.210016] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 49.210039] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 49.210046] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 49.210054] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 49.824441] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 49.824464] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 49.824471] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 49.824480] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 52.282074] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 52.282098] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 52.282105] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 52.282113] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 52.486839] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 52.486862] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 52.486869] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 52.486877] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 53.101251] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 53.101274] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 53.101281] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 53.101289] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 55.866177] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 55.866206] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 55.866216] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 55.866227] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 56.070922] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 56.070942] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 56.070948] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 56.070955] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 56.310167] EtherCAT WARNING 0-1: Failed to receive mbox check datagram for eoe0s1. [ 56.318280] EtherCAT WARNING 0-4: Failed to receive mbox check datagram for eoe0s4. [ 56.890192] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 56.890221] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 56.890228] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 56.890236] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 61.088668] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 61.088689] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 61.088695] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 61.088702] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 61.498268] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 61.498293] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 61.498299] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 61.498306] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 63.648729] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 63.648753] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 63.648760] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 63.648768] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 63.955914] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 63.955937] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 63.955943] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 63.955952] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 65.594328] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 65.594352] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 65.594359] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 65.594367] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 66.003948] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 66.003971] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 66.003978] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 66.003986] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 66.208746] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 66.208770] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 66.208777] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 66.208786] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 68.256815] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 68.256839] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 68.256845] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 68.256854] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 71.738318] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 71.738324] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 71.738326] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 71.738328] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 72.762343] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 72.762356] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 72.762358] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 72.762359] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 86.008788] device enp1s0 left promiscuous mode [ 86.009367] br1: port 1(enp1s0) entered disabled state [ 137.684093] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 137.684113] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 137.684119] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 137.684126] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 139.528550] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 139.528569] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 139.528575] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 139.528582] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 140.450214] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 140.450240] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 140.450246] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 140.450254] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 141.679012] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 141.679038] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 141.679046] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 141.679057] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 142.088699] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 142.088720] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 142.088726] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 142.088733] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 142.395876] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 142.395896] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 142.395902] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 142.395909] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 147.413531] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 147.413550] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 147.413556] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 147.413563] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 235.991011] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 235.991030] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 235.991037] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 235.991044] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 237.117818] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 237.117838] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 237.117844] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 237.117851] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 237.629827] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 237.629846] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 237.629852] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 237.629860] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 237.937034] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 237.937054] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 237.937060] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 237.937068] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 239.165900] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 239.165920] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 239.165926] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 239.165933] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 240.804350] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 240.804370] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 240.804376] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 240.804383] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 241.725881] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 241.725901] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 241.725908] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 241.725915] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 245.924450] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 245.924470] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 245.924476] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 245.924483] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 253.911782] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 253.911802] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 253.911808] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 253.911815] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 380.445476] EtherCAT: Requesting master 0... [ 380.445479] EtherCAT: Successfully requested master 0. [ 380.447079] EtherCAT 0: Domain0: Logical address 0x00000000, 180 byte, expected working counter 15. [ 380.447081] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 180 byte, type LRW. [ 380.447091] EtherCAT 0: Master thread exited. [ 380.447092] EtherCAT 0: Stopping EoE thread. [ 380.447099] EtherCAT 0: EoE thread exited. [ 380.447100] EtherCAT 0: Starting EoE thread. [ 380.447122] EtherCAT 0: Starting EtherCAT-OP thread. [ 380.447138] EtherCAT WARNING 0: 40 datagrams TIMED OUT! [ 380.610210] EtherCAT ERROR 0-0: Mailbox error response received - Unknown error reply code 0x0000. [ 380.610215] EtherCAT WARNING 0-0: Invalid mailbox response for eoe0s0. [ 380.634248] EtherCAT ERROR 0-0: Mailbox error response received - Unknown error reply code 0x0000. [ 380.634253] EtherCAT WARNING 0-0: Invalid mailbox response for eoe0s0. [ 385.714620] EtherCAT WARNING 0-0: Slave did not sync after 5000 ms. [ 386.002212] EtherCAT WARNING 0-1: Other mailbox protocol response for eoe0s1. [ 386.002289] EtherCAT ERROR 0-1: Reception of CoE download response failed: No response. [ 386.002293] EtherCAT WARNING 0-1: Failed to clear PDO mapping. [ 386.002293] EtherCAT WARNING 0-1: Currently mapped PDO entries: 0x6041:00/16 0x6061:00/8 0x6064:00/32 0x606C:00/32 0x6077:00/16 0x0000:00/8. Entries to map: 0x6041:00/16 0x6061:00/8 0x6064:00/32 0x606C:00/32 0x6077:00/16 [ 386.002305] EtherCAT WARNING 0-1: Failed to configure mapping of PDO 0x1A00. [ 386.023621] EtherCAT WARNING 0-1: CoE Emergency Request received: Error code 0x8188, Error register 0x11, data: [ 386.023627] EtherCAT DEBUG: 8E 00 00 00 00 [ 391.026620] EtherCAT WARNING 0-1: Slave did not sync after 5000 ms. [ 391.030619] EtherCAT ERROR 0-1: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR). [ 391.031619] EtherCAT ERROR 0-1: AL status message 0x001E: "Invalid input configuration". [ 391.033627] EtherCAT 0-1: Acknowledged state PREOP. [ 396.178622] EtherCAT WARNING 0-2: Slave did not sync after 5000 ms. [ 396.414214] EtherCAT WARNING 0-3: Other mailbox protocol response for eoe0s3. [ 396.414292] EtherCAT ERROR 0-3: Reception of CoE download response failed: No response. [ 396.414295] EtherCAT WARNING 0-3: Failed to map PDO entry 0x6060:00 (8 bit) to position 2. [ 396.414297] EtherCAT WARNING 0-3: Currently mapped PDO entries: 0x6040:00/16 0x6060:00/8 0x607A:00/32 0x6081:00/32 0x60FF:00/32 0x6071:00/16 0x60B1:00/32 0x60B2:00/16 0x0000:00/8. Entries to map: 0x6040:00/16 0x6060:00/8 0x607A:00/32 0x6081:00/32 0x60FF:00/32 0x6071:00/16 0x60B1:00/32 0x60B2:00/16 [ 396.414313] EtherCAT WARNING 0-3: Failed to configure mapping of PDO 0x1600. [ 396.433621] EtherCAT WARNING 0-3: CoE Emergency Request received: Error code 0x8188, Error register 0x11, data: [ 396.433626] EtherCAT DEBUG: 8E 00 00 00 00 [ 396.462222] EtherCAT WARNING 0-3: Other mailbox protocol response for eoe0s3. [ 396.462306] EtherCAT ERROR 0-3: Reception of CoE download response failed: No response. [ 396.462309] EtherCAT WARNING 0-3: Failed to map PDO entry 0x6077:00 (16 bit) to position 5. [ 396.462311] EtherCAT WARNING 0-3: Currently mapped PDO entries: 0x6041:00/16 0x6061:00/8 0x6064:00/32 0x606C:00/32 0x6077:00/16 0x0000:00/8. Entries to map: 0x6041:00/16 0x6061:00/8 0x6064:00/32 0x606C:00/32 0x6077:00/16 [ 396.462322] EtherCAT WARNING 0-3: Failed to configure mapping of PDO 0x1A00. [ 401.482619] EtherCAT WARNING 0-3: Slave did not sync after 5000 ms. [ 401.486137] EtherCAT ERROR 0-3: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR). [ 401.487618] EtherCAT ERROR 0-3: AL status message 0x001E: "Invalid input configuration". [ 401.489617] EtherCAT 0-3: Acknowledged state PREOP. [ 401.526223] EtherCAT ERROR 0-4: Mailbox error response received - Unknown error reply code 0x0000. [ 401.526228] EtherCAT WARNING 0-4: Invalid mailbox response for eoe0s4. [ 401.602218] EtherCAT ERROR 0-4: Mailbox error response received - Unknown error reply code 0x0000. [ 401.602222] EtherCAT WARNING 0-4: Invalid mailbox response for eoe0s4. [ 406.618136] EtherCAT WARNING 0-4: Slave did not sync after 5000 ms. [ 406.806134] EtherCAT 0: Slave states on main device: PREOP, OP. [ 438.337863] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 438.337871] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 438.337873] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 438.337875] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 450.728528] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 450.728537] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 450.728538] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 450.728540] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 451.013123] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 451.013131] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 451.013132] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 451.013134] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 455.949768] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 455.949776] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 455.949778] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 455.949780] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 1098.800640] perf: interrupt took too long (2596 > 2500), lowering kernel.perf_event_max_sample_rate to 77000 [ 1111.470127] EtherCAT WARNING 0: 1 datagram TIMED OUT! [ 1140.813998] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 1140.814006] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 1140.814008] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 1140.814010] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 1141.633206] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 1141.633214] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 1141.633216] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 1141.633218] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 1142.554832] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 1142.554841] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 1142.554842] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 1142.554844] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 1142.759612] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 1142.759620] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 1142.759621] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 1142.759623] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 1144.602868] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 1144.602876] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 1144.602878] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 1144.602880] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 1146.036476] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 1146.036485] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 1146.036487] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 1146.036489] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 1148.289318] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 1148.289326] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 1148.289328] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 1148.289330] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 1149.825342] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 1149.825351] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 1149.825353] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 1149.825355] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 1153.204620] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 1153.204628] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 1153.204630] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 1153.204632] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 1155.764631] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 1155.764639] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 1155.764641] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 1155.764643] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 1155.867052] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 1155.867060] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 1155.867062] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 1155.867064] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 1156.788680] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 1156.788688] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 1156.788690] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 1156.788692] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 1157.710276] pcieport 0000:00:1d.0: AER: Corrected error message received from 0000:00:1d.0 [ 1157.710284] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 1157.710287] pcieport 0000:00:1d.0: device [8086:9d1a] error status/mask=00000001/00002000 [ 1157.710289] pcieport 0000:00:1d.0: [ 0] RxErr (First) [ 1306.338223] EtherCAT WARNING 0-4: Other mailbox protocol response for eoe0s4. [ 1900.191699] EtherCAT 0: Master thread exited. [ 1900.191702] EtherCAT 0: Stopping EoE thread. [ 1900.191711] EtherCAT 0: EoE thread exited. [ 1900.191726] EtherCAT 0: Starting EoE thread. [ 1900.191752] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 1900.191787] EtherCAT 0: Releasing master... [ 1900.191789] EtherCAT 0: Released. [ 1900.192133] EtherCAT WARNING 0-1: Other mailbox protocol response for eoe0s1. [ 1900.192136] EtherCAT WARNING 0-3: Other mailbox protocol response for eoe0s3. [ 1900.202802] EtherCAT WARNING 0-0: Other mailbox protocol response for eoe0s0. [ 1900.202859] EtherCAT ERROR 0-0: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR). [ 1900.202894] EtherCAT ERROR 0-0: AL status message 0x001E: "Invalid input configuration". [ 1900.203073] EtherCAT 0-0: Acknowledged state PREOP. [ 1900.218352] EtherCAT ERROR 0-1: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR). [ 1900.218455] EtherCAT ERROR 0-1: AL status message 0x001E: "Invalid input configuration". [ 1900.218718] EtherCAT 0-1: Acknowledged state PREOP. [ 1900.231066] EtherCAT WARNING 0-2: Other mailbox protocol response for eoe0s2. [ 1900.231124] EtherCAT ERROR 0-2: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR). [ 1900.231157] EtherCAT ERROR 0-2: AL status message 0x001E: "Invalid input configuration". [ 1900.231410] EtherCAT 0-2: Acknowledged state PREOP. [ 1900.242007] EtherCAT ERROR 0-3: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR). [ 1900.242047] EtherCAT ERROR 0-3: AL status message 0x001E: "Invalid input configuration". [ 1900.242204] EtherCAT 0-3: Acknowledged state PREOP. [ 1900.253182] EtherCAT ERROR 0-4: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR). [ 1900.253213] EtherCAT ERROR 0-4: AL status message 0x001E: "Invalid input configuration". [ 1900.253352] EtherCAT 0-4: Acknowledged state PREOP. [ 1900.258152] EtherCAT 0: Slave states on main device: PREOP. [ 1915.430357] EtherCAT: Requesting master 0... [ 1915.430360] EtherCAT: Successfully requested master 0. [ 1915.431842] EtherCAT 0: Domain0: Logical address 0x00000000, 180 byte, expected working counter 15. [ 1915.431844] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 180 byte, type LRW. [ 1915.431855] EtherCAT 0: Master thread exited. [ 1915.431857] EtherCAT 0: Stopping EoE thread. [ 1915.431866] EtherCAT 0: EoE thread exited. [ 1915.431866] EtherCAT 0: Starting EoE thread. [ 1915.431889] EtherCAT 0: Starting EtherCAT-OP thread. [ 1915.438332] EtherCAT WARNING 0-2: Other mailbox protocol response for eoe0s2. [ 1915.438335] EtherCAT WARNING 0-3: Other mailbox protocol response for eoe0s3. [ 1915.438378] EtherCAT WARNING 0-4: Other mailbox protocol response for eoe0s4. [ 1915.438533] EtherCAT WARNING 0-4: Other mailbox protocol response for eoe0s4. [ 1915.446164] EtherCAT WARNING 0-0: Failed to receive mbox fetch datagram for eoe0s0. [ 1915.446166] EtherCAT WARNING 0-1: Failed to receive mbox fetch datagram for eoe0s1. [ 1915.446323] EtherCAT WARNING 0-0: Other mailbox protocol response for eoe0s0. [ 1915.446401] EtherCAT WARNING 0-1: Other mailbox protocol response for eoe0s1. [ 1915.594195] EtherCAT ERROR 0-0: Mailbox error response received - Unknown error reply code 0x0000. [ 1915.594199] EtherCAT WARNING 0-0: Invalid mailbox response for eoe0s0. [ 1915.614211] EtherCAT ERROR 0-0: Mailbox error response received - Unknown error reply code 0x0000. [ 1915.614215] EtherCAT WARNING 0-0: Invalid mailbox response for eoe0s0. [ 1915.654197] EtherCAT ERROR 0-0: Mailbox error response received - Unknown error reply code 0x0000. [ 1915.654201] EtherCAT WARNING 0-0: Invalid mailbox response for eoe0s0. [ 1916.430126] EtherCAT WARNING 0: 2 datagrams TIMED OUT! [ 1920.690115] EtherCAT WARNING 0-0: Slave did not sync after 5000 ms. [ 1926.022121] EtherCAT WARNING 0-1: Slave did not sync after 5000 ms. [ 1928.026205] EtherCAT WARNING 0-1: Other mailbox protocol response for eoe0s1. [ 1929.078202] EtherCAT ERROR 0-2: Mailbox error response received - Unknown error reply code 0x0000. [ 1929.078206] EtherCAT WARNING 0-2: Invalid mailbox response for eoe0s2. [ 1929.098209] EtherCAT ERROR 0-2: Mailbox error response received - Unknown error reply code 0x0000. [ 1929.098215] EtherCAT WARNING 0-2: Invalid mailbox response for eoe0s2. [ 1929.114215] EtherCAT WARNING 0-2: Other mailbox protocol response for eoe0s2. [ 1929.114298] EtherCAT ERROR 0-2: Reception of CoE download response failed: No response. [ 1929.114301] EtherCAT WARNING 0-2: Failed to map PDO entry 0x6064:00 (32 bit) to position 3. [ 1929.114304] EtherCAT WARNING 0-2: Currently mapped PDO entries: 0x6041:00/16 0x6061:00/8 0x6064:00/32 0x606C:00/32 0x6077:00/16. Entries to map: 0x6041:00/16 0x6061:00/8 0x6064:00/32 0x606C:00/32 0x6077:00/16 [ 1929.114317] EtherCAT WARNING 0-2: Failed to configure mapping of PDO 0x1A00. [ 1929.131511] EtherCAT WARNING 0-2: CoE Emergency Request received: Error code 0x8188, Error register 0x11, data: [ 1929.131515] EtherCAT DEBUG: 8E 00 00 00 00 [ 1933.430109] EtherCAT WARNING 0: 2 datagrams TIMED OUT! [ 1934.134122] EtherCAT WARNING 0-2: Slave did not sync after 5000 ms. [ 1934.137510] EtherCAT ERROR 0-2: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR). [ 1934.138511] EtherCAT ERROR 0-2: AL status message 0x001E: "Invalid input configuration". [ 1934.140511] EtherCAT 0-2: Acknowledged state PREOP. [ 1939.258514] EtherCAT WARNING 0-3: Slave did not sync after 5000 ms. [ 1941.302198] EtherCAT WARNING 0-3: Other mailbox protocol response for eoe0s3. [ 1942.382241] EtherCAT ERROR 0-4: Mailbox error response received - Unknown error reply code 0x0000. [ 1942.382246] EtherCAT WARNING 0-4: Invalid mailbox response for eoe0s4. [ 1947.266162] EtherCAT 0: Slave states on main device: PREOP, OP. [ 1992.846636] EtherCAT 0: Master thread exited. [ 1992.846640] EtherCAT 0: Stopping EoE thread. [ 1992.846648] EtherCAT 0: EoE thread exited. [ 1992.846663] EtherCAT 0: Starting EoE thread. [ 1992.846693] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 1992.846732] EtherCAT 0: Releasing master... [ 1992.846734] EtherCAT 0: Released. [ 1992.846881] EtherCAT WARNING 0-2: Other mailbox protocol response for eoe0s2. [ 1992.850445] EtherCAT ERROR 0-0: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR). [ 1992.850531] EtherCAT ERROR 0-0: AL status message 0x001E: "Invalid input configuration". [ 1992.850796] EtherCAT 0-0: Acknowledged state PREOP. [ 1992.862151] EtherCAT ERROR 0-1: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR). [ 1992.862183] EtherCAT ERROR 0-1: AL status message 0x001E: "Invalid input configuration". [ 1992.862354] EtherCAT 0-1: Acknowledged state PREOP. [ 1992.878753] EtherCAT ERROR 0-2: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR). [ 1992.878784] EtherCAT ERROR 0-2: AL status message 0x001E: "Invalid input configuration". [ 1992.878923] EtherCAT 0-2: Acknowledged state PREOP. [ 1992.890977] EtherCAT ERROR 0-3: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR). [ 1992.891009] EtherCAT ERROR 0-3: AL status message 0x001E: "Invalid input configuration". [ 1992.891150] EtherCAT 0-3: Acknowledged state PREOP. [ 1992.902753] EtherCAT ERROR 0-4: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR). [ 1992.902783] EtherCAT ERROR 0-4: AL status message 0x001E: "Invalid input configuration". [ 1992.902926] EtherCAT 0-4: Acknowledged state PREOP. [ 1992.910146] EtherCAT 0: Slave states on main device: PREOP. [ 2120.358192] perf: interrupt took too long (3249 > 3245), lowering kernel.perf_event_max_sample_rate to 61500 [ 2767.932788] EtherCAT: Requesting master 0... [ 2767.932791] EtherCAT: Successfully requested master 0. [ 2767.934335] EtherCAT 0: Domain0: Logical address 0x00000000, 180 byte, expected working counter 15. [ 2767.934337] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 180 byte, type LRW. [ 2767.934347] EtherCAT 0: Master thread exited. [ 2767.934348] EtherCAT 0: Stopping EoE thread. [ 2767.934354] EtherCAT 0: EoE thread exited. [ 2767.934355] EtherCAT 0: Starting EoE thread. [ 2767.934378] EtherCAT 0: Starting EtherCAT-OP thread. [ 2767.934509] EtherCAT WARNING 0-2: Other mailbox protocol response for eoe0s2. [ 2767.934511] EtherCAT WARNING 0-3: Other mailbox protocol response for eoe0s3. [ 2767.934554] EtherCAT WARNING 0-4: Other mailbox protocol response for eoe0s4. [ 2767.934761] EtherCAT WARNING 0-3: Other mailbox protocol response for eoe0s3. [ 2767.941567] EtherCAT WARNING 0-0: Other mailbox protocol response for eoe0s0. [ 2767.941612] EtherCAT WARNING 0-1: Other mailbox protocol response for eoe0s1. [ 2767.941875] EtherCAT WARNING 0-1: Other mailbox protocol response for eoe0s1. [ 2768.934100] EtherCAT WARNING 0: 2 datagrams TIMED OUT! [ 2773.186128] EtherCAT WARNING 0-0: Slave did not sync after 5000 ms. [ 2773.458209] EtherCAT ERROR 0-1: Mailbox error response received - Unknown error reply code 0x0000. [ 2773.458213] EtherCAT WARNING 0-1: Invalid mailbox response for eoe0s1. [ 2773.478242] EtherCAT WARNING 0-1: Other mailbox protocol response for eoe0s1. [ 2778.506661] EtherCAT WARNING 0-1: Slave did not sync after 5000 ms. [ 2781.538187] EtherCAT ERROR 0-2: Mailbox error response received - Unknown error reply code 0x0000. [ 2781.538192] EtherCAT WARNING 0-2: Invalid mailbox response for eoe0s2. [ 2786.638661] EtherCAT WARNING 0-2: Slave did not sync after 5000 ms. [ 2788.650223] EtherCAT WARNING 0-2: Other mailbox protocol response for eoe0s2. [ 2794.822662] EtherCAT WARNING 0-3: Slave did not sync after 5000 ms. [ 2798.894108] EtherCAT 0: Slave states on main device: OP.