N0010 (Filename: 5015-20-0212 - 4,5 x 10 helical.ngc)
N0020 (Post processor: TMG_Plasma.scpost)
N0030 (Date: 01/22/2021)
N0040 G20 (Units: Inches)
N0050 G90 
G40
N0060 (Part: 5015-20-0212 - 4,5 x 10 helical)
N0070 (Operation: Outside Offset, 1, T1: Plasma, 0.0591 inch kerf)
M5
G53 G00 Z[#<_ini[axis_z]max_limit> - 0.02]
N0080 G54 G91.1 G00 X-48.2115 Y-22.0749
N0090 M3 $0 S1
N0100 G04 P0.6
N0110 G01 F#<_hal[plasmac.cut-feed-rate]>
N0120 G02 X-48.5170 Y-22.4087 I-0.3197 J-0.0142 F#<_hal[plasmac.cut-feed-rate]>
N0130 G02 X-48.7228 Y-17.7764 I-0.1029 J2.3162 F#<_hal[plasmac.cut-feed-rate]>
N0140 G03 X-48.6946 Y-17.7449 I-0.0013 J0.0295 F#<_hal[plasmac.cut-feed-rate]>
N0150 G01 X-48.8811 Y-15.0261 F#<_hal[plasmac.cut-feed-rate]>
N0160 G03 X-48.9123 Y-14.9987 I-0.0295 J-0.0020 F#<_hal[plasmac.cut-feed-rate]>
N0170 G03 X-48.5969 Y-14.9903 I0.2924 J-5.0939 F#<_hal[plasmac.cut-feed-rate]>
N0180 G03 X-48.6266 Y-15.0201 I-0.0001 J-0.0295 F#<_hal[plasmac.cut-feed-rate]>
N0190 G01 X-48.6084 Y-17.7451 F#<_hal[plasmac.cut-feed-rate]>
N0200 G03 X-48.5794 Y-17.7745 I0.0295 J0.0002 F#<_hal[plasmac.cut-feed-rate]>
N0210 G02 X-48.5170 Y-22.4087 I-0.0405 J-2.3181 F#<_hal[plasmac.cut-feed-rate]>
N0220 G02 X-48.6172 Y-22.3171 I-0.0043 J0.0959 F#<_hal[plasmac.cut-feed-rate]>
N0230 M05
N0240 G00
N0250 X-37.8067 Y-19.3684
N0260 M3 $0 S1
N0270 G04 P0.6
N0280 G01 F#<_hal[plasmac.cut-feed-rate]>
N0290 G02 X-38.1122 Y-19.7023 I-0.3197 J-0.0142 F#<_hal[plasmac.cut-feed-rate]>
N0300 G02 X-38.3179 Y-15.0700 I-0.1029 J2.3162 F#<_hal[plasmac.cut-feed-rate]>
N0310 G03 X-38.2897 Y-15.0384 I-0.0013 J0.0295 F#<_hal[plasmac.cut-feed-rate]>
N0320 G01 X-38.4762 Y-12.3197 F#<_hal[plasmac.cut-feed-rate]>
N0330 G03 X-38.5074 Y-12.2922 I-0.0295 J-0.0020 F#<_hal[plasmac.cut-feed-rate]>
N0340 G03 X-38.1920 Y-12.2839 I0.2924 J-5.0939 F#<_hal[plasmac.cut-feed-rate]>
N0350 G03 X-38.2217 Y-12.3137 I-0.0001 J-0.0295 F#<_hal[plasmac.cut-feed-rate]>
N0360 G01 X-38.2036 Y-15.0387 F#<_hal[plasmac.cut-feed-rate]>
N0370 G03 X-38.1745 Y-15.0681 I0.0295 J0.0002 F#<_hal[plasmac.cut-feed-rate]>
N0380 G02 X-38.1122 Y-19.7023 I-0.0405 J-2.3181 F#<_hal[plasmac.cut-feed-rate]>
N0390 G02 X-38.2123 Y-19.6107 I-0.0043 J0.0959 F#<_hal[plasmac.cut-feed-rate]>
N0400 M05
N0410 G00
N0420 X-27.3496 Y-22.0749
N0430 M3 $0 S1
N0440 G04 P0.6
N0450 G01 F#<_hal[plasmac.cut-feed-rate]>
N0460 G02 X-27.6551 Y-22.4087 I-0.3197 J-0.0142 F#<_hal[plasmac.cut-feed-rate]>
N0470 G02 X-27.8609 Y-17.7764 I-0.1029 J2.3162 F#<_hal[plasmac.cut-feed-rate]>
N0480 G03 X-27.8327 Y-17.7449 I-0.0013 J0.0295 F#<_hal[plasmac.cut-feed-rate]>
N0490 G01 X-28.0192 Y-15.0261 F#<_hal[plasmac.cut-feed-rate]>
N0500 G03 X-28.0504 Y-14.9987 I-0.0295 J-0.0020 F#<_hal[plasmac.cut-feed-rate]>
N0510 G03 X-27.7350 Y-14.9903 I0.2924 J-5.0939 F#<_hal[plasmac.cut-feed-rate]>
N0520 G03 X-27.7647 Y-15.0201 I-0.0001 J-0.0295 F#<_hal[plasmac.cut-feed-rate]>
N0530 G01 X-27.7465 Y-17.7451 F#<_hal[plasmac.cut-feed-rate]>
N0540 G03 X-27.7175 Y-17.7745 I0.0295 J0.0002 F#<_hal[plasmac.cut-feed-rate]>
N0550 G02 X-27.6551 Y-22.4087 I-0.0405 J-2.3181 F#<_hal[plasmac.cut-feed-rate]>
N0560 G02 X-27.7553 Y-22.3171 I-0.0043 J0.0959 F#<_hal[plasmac.cut-feed-rate]>
N0570 M05