Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl:

Print file information:
RUN_IN_PLACE=no
LINUXCNC_DIR=
LINUXCNC_BIN_DIR=/usr/bin
LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc
LINUXCNC_SCRIPT_DIR=
LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules
LINUXCNC_CONFIG_DIR=
LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs
INIVAR=inivar
HALCMD=halcmd
LINUXCNC_EMCSH=/usr/bin/wish8.6
LINUXCNC - 2.10.0-pre0-3745-g8102217123
Machine configuration directory is '/home/plasma/linuxcnc/configs/sim.qtplasmac'
Machine configuration file is 'qtplasmac_l_metric.ini.expanded'
INIFILE=/home/plasma/linuxcnc/configs/sim.qtplasmac/qtplasmac_l_metric.ini.expanded
VERSION=1.1
PARAMETER_FILE=metric_parameters.txt
TPMOD=
HOMEMOD=
TASK=milltask
HALUI=halui
DISPLAY=qtvcp qtplasmac
COORDINATES=XYYZ
KINEMATICS=trivkins coordinates=xyyz
Starting LinuxCNC...
Starting LinuxCNC server program: linuxcncsvr
linuxcncsvr (165761) emcsvr: machine 'qtplasmac-metric'  version '1.1'
Loading Real Time OS, RTAPI, and HAL_LIB modules
linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod
Starting TASK program: milltask
milltask (165774) task: machine 'qtplasmac-metric'  version '1.1'
Starting HAL User Interface program: halui
halui (165776) halui: machine 'qtplasmac-metric'  version '1.1'
twopass:invoked with <> options
twopass:found ./sim_no_stepgen.tcl
twopass:found /usr/share/linuxcnc/hallib/qtplasmac_comp.hal
twopass:found ./custom.hal
USRMOT: ERROR: command 30 timeout
emcMotionInit: emcTrajInit failed
Starting DISPLAY program: qtvcp
preference file does not exist -makeing file - /home/plasma/linuxcnc/configs/sim.qtplasmac/qtplasmac-metric.prefs
preference file does not exist -makeing file - /home/plasma/linuxcnc/configs/sim.qtplasmac/qtplasmac-metric_material.cfg
preference file does not exist -makeing file - /home/plasma/linuxcnc/configs/sim.qtplasmac/qtvcp.prefs
No section: 'DIALOG_GEOMETRY'
Adding section DIALOG_GEOMETRY
No option 'LncMessage-geometry' in section: 'DIALOG_GEOMETRY'
No section: 'DIALOG_OPTIONS'
Adding section DIALOG_OPTIONS
No option 'EntryDialog_sound_type' in section: 'DIALOG_OPTIONS'
No option 'fileDialog_play_sound' in section: 'DIALOG_OPTIONS'
No option 'fileDialog_sound_type' in section: 'DIALOG_OPTIONS'
No section: 'BOOK_KEEPING'
Adding section BOOK_KEEPING
No section: 'SCREEN_OPTIONS'
Adding section SCREEN_OPTIONS
No option 'overlay_sound_type' in section: 'SCREEN_OPTIONS'
No option 'KeyboardDialog_play_sound' in section: 'DIALOG_OPTIONS'
No option 'KeyboardDialog_sound_type' in section: 'DIALOG_OPTIONS'
No option 'CalculatorDialog_play_sound' in section: 'DIALOG_OPTIONS'
No option 'CalculatorDialog_sound_type' in section: 'DIALOG_OPTIONS'
No option 'MachineLogDialog_play_sound' in section: 'DIALOG_OPTIONS'
No option 'MachineLogDialog_sound_type' in section: 'DIALOG_OPTIONS'
No option 'catch_errors' in section: 'SCREEN_OPTIONS'
No option 'desktop_notify' in section: 'SCREEN_OPTIONS'
No option 'notify_max_msgs' in section: 'SCREEN_OPTIONS'
No option 'shutdown_check' in section: 'SCREEN_OPTIONS'
No option 'sound_player_on' in section: 'SCREEN_OPTIONS'
No section: 'MCH_MSG_OPTIONS'
Adding section MCH_MSG_OPTIONS
No option 'mchnMsg_speak_errors' in section: 'MCH_MSG_OPTIONS'
No option 'mchnMsg_speak_text' in section: 'MCH_MSG_OPTIONS'
No option 'mchnMsg_sound_type' in section: 'MCH_MSG_OPTIONS'
No section: 'USR_MSG_OPTIONS'
Adding section USR_MSG_OPTIONS
No option 'userMsg_sound_type' in section: 'USR_MSG_OPTIONS'
No option 'userMsg_use_focusOverlay' in section: 'USR_MSG_OPTIONS'
No section: 'SHUTDOWN_OPTIONS'
Adding section SHUTDOWN_OPTIONS
No option 'shutdown_alert_sound_type' in section: 'SHUTDOWN_OPTIONS'
No option 'shutdown_exit_sound_type' in section: 'SHUTDOWN_OPTIONS'
No option 'shutdown_msg_title' in section: 'SHUTDOWN_OPTIONS'
No option 'shutdown_msg_focus_text' in section: 'SHUTDOWN_OPTIONS'
No option 'shutdown_msg_detail' in section: 'SHUTDOWN_OPTIONS'
No section: 'NOTIFY_OPTIONS'
Adding section NOTIFY_OPTIONS
No option 'notify_start_title' in section: 'NOTIFY_OPTIONS'
No option 'notify_start_detail' in section: 'NOTIFY_OPTIONS'
No option 'notify_start_timeout' in section: 'NOTIFY_OPTIONS'
No section: 'SCREEN_CONTROL_LAST_SETTING'
Adding section SCREEN_CONTROL_LAST_SETTING
No option 'conv_preview-user-zoom' in section: 'SCREEN_CONTROL_LAST_SETTING'
No option 'conv_preview-user-panx' in section: 'SCREEN_CONTROL_LAST_SETTING'
No option 'conv_preview-user-pany' in section: 'SCREEN_CONTROL_LAST_SETTING'
No option 'conv_preview-user-lat' in section: 'SCREEN_CONTROL_LAST_SETTING'
No option 'conv_preview-user-lon' in section: 'SCREEN_CONTROL_LAST_SETTING'
No section: 'ORIGINOFFSET_SYSTEM_NAMES'
Adding section ORIGINOFFSET_SYSTEM_NAMES
No option 'originoffsetview-G55' in section: 'ORIGINOFFSET_SYSTEM_NAMES'
No option 'originoffsetview-G56' in section: 'ORIGINOFFSET_SYSTEM_NAMES'
No option 'originoffsetview-G57' in section: 'ORIGINOFFSET_SYSTEM_NAMES'
No option 'originoffsetview-G58' in section: 'ORIGINOFFSET_SYSTEM_NAMES'
No option 'originoffsetview-G59' in section: 'ORIGINOFFSET_SYSTEM_NAMES'
No option 'originoffsetview-G59.1' in section: 'ORIGINOFFSET_SYSTEM_NAMES'
No option 'originoffsetview-G59.2' in section: 'ORIGINOFFSET_SYSTEM_NAMES'
No option 'originoffsetview-G59.3' in section: 'ORIGINOFFSET_SYSTEM_NAMES'
No option 'gcodegraphics-user-view' in section: 'SCREEN_CONTROL_LAST_SETTING'
No option 'gcodegraphics-user-zoom' in section: 'SCREEN_CONTROL_LAST_SETTING'
No option 'gcodegraphics-user-panx' in section: 'SCREEN_CONTROL_LAST_SETTING'
No option 'gcodegraphics-user-pany' in section: 'SCREEN_CONTROL_LAST_SETTING'
No option 'gcodegraphics-user-lat' in section: 'SCREEN_CONTROL_LAST_SETTING'
No option 'gcodegraphics-user-lon' in section: 'SCREEN_CONTROL_LAST_SETTING'
No section: 'GUI_OPTIONS'
Adding section GUI_OPTIONS
No option 'Autorepeat all' in section: 'GUI_OPTIONS'
No option 'Flash error' in section: 'GUI_OPTIONS'
No option 'Use keyboard shortcuts' in section: 'GUI_OPTIONS'
No option 'Use soft keyboard' in section: 'GUI_OPTIONS'
No option 'Show materials' in section: 'GUI_OPTIONS'
No option 'Run from line' in section: 'GUI_OPTIONS'
No option 'Tool tips' in section: 'GUI_OPTIONS'
No option 'Exit warning' in section: 'GUI_OPTIONS'
No option 'Exit warning text' in section: 'GUI_OPTIONS'
No option 'Preview cone size' in section: 'GUI_OPTIONS'
No option 'Preview grid size' in section: 'GUI_OPTIONS'
No option 'T view zoom scale' in section: 'GUI_OPTIONS'
No option 'Override jog inhibit via Z+' in section: 'GUI_OPTIONS'
No section: 'COLOR_OPTIONS'
Adding section COLOR_OPTIONS
No option 'Highlight' in section: 'COLOR_OPTIONS'
No option 'LED' in section: 'COLOR_OPTIONS'
No option 'Background' in section: 'COLOR_OPTIONS'
No option 'Background Alt' in section: 'COLOR_OPTIONS'
No option 'Frames' in section: 'COLOR_OPTIONS'
No option 'Estop' in section: 'COLOR_OPTIONS'
No option 'Disabled' in section: 'COLOR_OPTIONS'
No option 'Preview' in section: 'COLOR_OPTIONS'
No option 'RecentPath_0' in section: 'BOOK_KEEPING'
task: 0 cycles, min=0.000009, max=0.010649, avg=-1.000000, 0 latency excursions (> 10x expected cycle time of 0.010000s)

identityKinematicsSetup: coordinates:xyyz
   Joint 0 ==> Axis X
   Joint 1 ==> Axis Y
   Joint 2 ==> Axis Y
   Joint 3 ==> Axis Z
identityKinematicsSetup: Recommend: kinstype=both

Adding section ENABLE_OPTIONS
Shutting down and cleaning up LinuxCNC...
Removing HAL_LIB, RTAPI, and Real Time OS modules
Removing NML shared memory segments

Debug file information:
Note: Using POSIX realtime
link (updating variable file): No such file or directory
[QTvcp][CRITICAL]  Aborted from Error Dialog
 Qtvcp encountered an error.  The following information may be useful in troubleshooting:
LinuxCNC Version  : 2.10.0-pre0-3745-g8102217123

Traceback (most recent call last):
  File "/usr/bin/qtvcp", line 596, in <module>
    _qtvcp = QTVCP()
             ^^^^^^^
  File "/usr/bin/qtvcp", line 327, in __init__
    window.handler_instance.initialized__()
  File "/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py", line 377, in initialized__
    self.init_preferences()
  File "/usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py", line 1024, in init_preferences
    TOOLTIPS.tool_tips_changed(self, self.w)
  File "/usr/lib/python3/dist-packages/qtvcp/lib/qtplasmac/tooltips.py", line 32, in tool_tips_changed
    set_tool_tips(P, W)
  File "/usr/lib/python3/dist-packages/qtvcp/lib/qtplasmac/tooltips.py", line 196, in set_tool_tips
    W.pause.setToolTip(_translate('ToolTips', 'Pauses or resume the currently running G-Code program'))
    ^^^^^^^
AttributeError: 'VCPWindow' object has no attribute 'pause'

 (qtvcp:552)
shmctl(98324, IPC_STAT, ...): Invalid argument
shmctl(98322, IPC_STAT, ...): Invalid argument
Stopping realtime threads
Unloading hal components
Note: Using POSIX realtime



-----------------------------------------------------------------------
Info report created by linuxcnc_info:
The file:    /tmp/linuxcnc_info.txt
can be posted to a forum or a web site like:
     http://pastebin.com
in order to provide information about the linuxcnc
system and configuration.

                Date: Tue Dec 17 04:01:52 PM SAST 2024
            UTC Date: Tue Dec 17 02:01:52 PM UTC 2024
        this program: /usr/bin/linuxcnc_info
              uptime: 16:01:52 up 5:22, 1 user, load average: 1.32, 1.95, 2.05
     lsb_release -sa: Debian Debian GNU/Linux 12 (bookworm) 12 bookworm
            linuxcnc: /usr/bin/linuxcnc
                 pwd: /home/plasma/linuxcnc/configs/sim.qtplasmac
                USER: plasma
             LOGNAME: plasma
                HOME: /home/plasma
              EDITOR: 
              VISUAL: 
            LANGUAGE: 
                TERM: dumb
           COLORTERM: 
             DISPLAY: :0.0
             DESKTOP: lightdm-xsession
        display size: 1280x1024 pixels (338x270 millimeters)
                PATH: /usr/bin:/home/plasma/linuxcnc/configs/sim.qtplasmac/bin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games

uname items:
         nodename -n: bacnc
      kernel-name -s: Linux
      kernel-vers -v: #1 SMP PREEMPT_RT Debian 6.1.112-1 (2024-09-30)
          machine -m: x86_64
        processor -p: unknown
         platform -i: unknown
      oper system -o: GNU/Linux

/proc items:
             cmdline: BOOT_IMAGE=/boot/vmlinuz-6.1.0-26-rt-amd64 root=UUID=bfdcf9b0-7caa-4c4b-b4c3-585accea347a ro quiet splash
          model name: Intel(R) Core(TM) i7-4770S CPU @ 3.10GHz
               cores: 4
             cpu MHz: 2285.724
             parport: 
              serial: 

Versions:
                 gcc: gcc (Debian 12.2.0-14) 12.2.0
              python: Python 3.11.2
                 git: git version 2.39.5
          git commit: NA
                 tcl: 8.6
                  tk: 8.6
               glade: not_in_PATH

linuxcnc_var all:

     LINUXCNCVERSION: 2.10.0-pre0-3745-g8102217123
LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp
LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples
            REALTIME: /usr/lib/linuxcnc/realtime
                 RTS: uspace
          HALLIB_DIR: /usr/share/linuxcnc/hallib
              PYTHON: /usr/bin/python3

dpkg -l '*linuxcnc*':
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name                   Version                        Architecture Description
+++-======================-==============================-============-=====================================================================
un  linuxcnc               <none>                         <none>       (no description available)
un  linuxcnc-dev           <none>                         <none>       (no description available)
un  linuxcnc-doc           <none>                         <none>       (no description available)
ii  linuxcnc-doc-en        1:2.10.0~pre0.3745.g8102217123 all          motion controller for CNC machines and robots (English documentation)
un  linuxcnc-doc-es        <none>                         <none>       (no description available)
un  linuxcnc-doc-fr        <none>                         <none>       (no description available)
un  linuxcnc-sim           <none>                         <none>       (no description available)
un  linuxcnc-sim-dev       <none>                         <none>       (no description available)
ii  linuxcnc-uspace        1:2.10.0~pre0.3745.g8102217123 amd64        motion controller for CNC machines and robots
ii  linuxcnc-uspace-dbgsym 1:2.10.0~pre0.3745.g8102217123 amd64        debug symbols for linuxcnc-uspace
ii  linuxcnc-uspace-dev    1:2.10.0~pre0.3745.g8102217123 amd64        PC based motion controller for real-time Linux