Print file information: RUN_IN_PLACE=no EMC2_DIR= EMC2_BIN_DIR=/usr/bin EMC2_TCL_DIR=/usr/share/emc/tcl EMC2_SCRIPT_DIR= EMC2_RTLIB_DIR=/usr/realtime-2.6.32-122-rtai/modules/emc2 EMC2_CONFIG_DIR= EMC2_LANG_DIR=/usr/share/emc/tcl/msgs INIVAR=inivar HALCMD=halcmd EMC2_EMCSH=/usr/bin/wish8.5 EMC2 - 2.4.3 Machine configuration directory is '/home/cnc/emc2/configs/motenc' Machine configuration file is 'motenc.ini' INIFILE=/home/cnc/emc2/configs/motenc/motenc.ini PARAMETER_FILE=motenc.var EMCMOT=motmod EMCIO=io TASK=milltask HALUI= DISPLAY=tkemc NML_FILE= Starting EMC2... Starting EMC2 server program: emcsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Realtime system did not load Shutting down and cleaning up EMC2... Killing task emcsvr, PID=1743 Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Cleanup done Debug file information: insmod: error inserting '/usr/realtime-2.6.32-122-rtai/modules/rtai_hal.ko': -1 Operation not permitted 1743 PID TTY STAT TIME COMMAND Stopping realtime threads RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded Unloading hal components RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded ERROR: Module hal_lib does not exist in /proc/modules ERROR: Module rtapi does not exist in /proc/modules ERROR: Module rtai_math does not exist in /proc/modules ERROR: Module rtai_sem does not exist in /proc/modules ERROR: Module rtai_fifos does not exist in /proc/modules ERROR: Module rtai_sched does not exist in /proc/modules ERROR: Module rtai_hal does not exist in /proc/modules Kernel message information: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-122-rtai (root@moses-6core) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #rtai SMP Tue Jul 27 12:44:07 CDT 2010 (Ubuntu 2.6.32-122.35.rtai-rtai 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000002c000000 (usable) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x2c000 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 020000000 mask FF8000000 write-back [ 0.000000] 2 base 028000000 mask FFC000000 write-back [ 0.000000] 3 base 0E4000000 mask FFC000000 write-combining [ 0.000000] 4 base 0E8000000 mask FFC000000 write-combining [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000002c000000 (usable) [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000002c000000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 002c000000 page 2M [ 0.000000] kernel direct mapping tables up to 2c000000 @ 10000-14000 [ 0.000000] RAMDISK: 203c0000 - 2103fcd3 [ 0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 704MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 2c000000 [ 0.000000] low ram: 0 - 2c000000 [ 0.000000] node 0 low ram: 00000000 - 2c000000 [ 0.000000] node 0 bootmap 00010000 - 00015800 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 002c000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008b0db8] TEXT DATA BSS ==> [0000100000 - 00008b0db8] [ 0.000000] #4 [00203c0000 - 002103fcd3] RAMDISK ==> [00203c0000 - 002103fcd3] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00008b1000 - 00008b40b6] BRK ==> [00008b1000 - 00008b40b6] [ 0.000000] #7 [0000010000 - 0000016000] BOOTMAP ==> [0000010000 - 0000016000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0002c000 [ 0.000000] HighMem 0x0002c000 -> 0x0002c000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0002c000 [ 0.000000] On node 0 totalpages: 180111 [ 0.000000] free_area_init_node: node 0, pgdat c07470e0, node_mem_map c1001200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1376 pages used for memmap [ 0.000000] Normal zone: 174752 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] No local APIC present or hardware disabled [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] Allocating PCI resources starting at 2c000000 (gap: 2c000000:d3ff0000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 24 pages/cpu @c1800000 s74936 r0 d23368 u4194304 [ 0.000000] pcpu-alloc: s74936 r0 d23368 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 178703 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-122-rtai root=UUID=45bb1e27-6f39-422c-a4b9-483899992682 ro quiet splash lapic [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 3604160 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 689384k/720896k available (4539k kernel code, 30756k reserved, 1928k data, 620k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xec800000 - 0xff7fe000 ( 303 MB) [ 0.000000] lowmem : 0xc0000000 - 0xec000000 ( 704 MB) [ 0.000000] .init : 0xc0751000 - 0xc07ec000 ( 620 kB) [ 0.000000] .data : 0xc056ecbc - 0xc0750e68 (1928 kB) [ 0.000000] .text : 0xc0100000 - 0xc056ecbc (4539 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] I-pipe 2.6-03: pipeline enabled. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 800.355 MHz processor. [ 0.004015] Calibrating delay loop (skipped), value calculated using timer frequency.. 1600.71 BogoMIPS (lpj=3201420) [ 0.004115] Security Framework initialized [ 0.004248] AppArmor: AppArmor initialized [ 0.004283] Mount-cache hash table entries: 512 [ 0.004791] Initializing cgroup subsys ns [ 0.004809] Initializing cgroup subsys cpuacct [ 0.004833] Initializing cgroup subsys memory [ 0.004873] Initializing cgroup subsys devices [ 0.004887] Initializing cgroup subsys freezer [ 0.004900] Initializing cgroup subsys net_cls [ 0.004969] CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line) [ 0.004985] CPU: L2 Cache: 64K (32 bytes/line) [ 0.005032] Performance Events: [ 0.005052] Checking 'hlt' instruction... OK. [ 0.021936] SMP alternatives: switching to UP code [ 0.057986] Freeing SMP alternatives: 31k freed [ 0.058134] ftrace: converting mcount calls to 66 66 66 66 90 [ 0.058171] ftrace: allocating 21003 entries in 42 pages [ 0.080213] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.080229] weird, boot CPU (#0) not listed by the BIOS. [ 0.080239] SMP motherboard not detected. [ 0.080250] Local APIC not detected. Using dummy APIC emulation. [ 0.080259] SMP disabled [ 0.081091] Brought up 1 CPUs [ 0.081107] Total of 1 processors activated (1600.71 BogoMIPS). [ 0.081734] CPU0 attaching NULL sched-domain. [ 0.082259] devtmpfs: initialized [ 0.083668] regulator: core version 0.5 [ 0.083910] NET: Registered protocol family 16 [ 0.084452] EISA bus registered [ 0.090765] PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=1 [ 0.090777] PCI: Using configuration type 1 for base access [ 0.094319] bio: create slab at 0 [ 0.094557] ACPI: Interpreter disabled. [ 0.094777] vgaarb: loaded [ 0.095263] SCSI subsystem initialized [ 0.095495] libata version 3.00 loaded. [ 0.095800] usbcore: registered new interface driver usbfs [ 0.095851] usbcore: registered new interface driver hub [ 0.095962] usbcore: registered new device driver usb [ 0.096470] PCI: Probing PCI hardware [ 0.096482] PCI: Probing PCI hardware (bus 00) [ 0.096622] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe4000000-0xe7ffffff] [ 0.096793] pci 0000:00:01.0: supports D1 [ 0.096886] pci 0000:00:08.0: reg 10 32bit mmio: [0xee000000-0xee00007f] [ 0.096908] pci 0000:00:08.0: reg 14 io port: [0xeb00-0xeb7f] [ 0.096930] pci 0000:00:08.0: reg 18 32bit mmio: [0xee001000-0xee0011ff] [ 0.097005] pci 0000:00:08.0: PME# supported from D0 D3hot [ 0.097021] pci 0000:00:08.0: PME# disabled [ 0.097126] pci 0000:00:10.0: reg 20 io port: [0xec00-0xec1f] [ 0.097174] pci 0000:00:10.0: supports D1 D2 [ 0.097186] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.097201] pci 0000:00:10.0: PME# disabled [ 0.097289] pci 0000:00:10.1: reg 20 io port: [0xe800-0xe81f] [ 0.097337] pci 0000:00:10.1: supports D1 D2 [ 0.097348] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.097363] pci 0000:00:10.1: PME# disabled [ 0.097457] pci 0000:00:10.2: reg 20 io port: [0xe900-0xe91f] [ 0.097505] pci 0000:00:10.2: supports D1 D2 [ 0.097517] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.097532] pci 0000:00:10.2: PME# disabled [ 0.097596] pci 0000:00:10.3: reg 10 32bit mmio: [0xee002000-0xee0020ff] [ 0.097669] pci 0000:00:10.3: supports D1 D2 [ 0.097680] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.097695] pci 0000:00:10.3: PME# disabled [ 0.097814] pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM [ 0.097831] pci 0000:00:11.0: quirk: region 5000-500f claimed by vt8235 SMB [ 0.097944] pci 0000:00:11.1: reg 20 io port: [0xea00-0xea0f] [ 0.098056] pci 0000:00:11.5: reg 10 io port: [0xe000-0xe0ff] [ 0.098130] pci 0000:00:11.5: supports D1 D2 [ 0.098198] pci 0000:00:12.0: reg 10 io port: [0xe400-0xe4ff] [ 0.098220] pci 0000:00:12.0: reg 14 32bit mmio: [0xee003000-0xee0030ff] [ 0.098288] pci 0000:00:12.0: supports D1 D2 [ 0.098300] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.098315] pci 0000:00:12.0: PME# disabled [ 0.098420] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xe8000000-0xebffffff] [ 0.098441] pci 0000:01:00.0: reg 14 32bit mmio: [0xec000000-0xecffffff] [ 0.098482] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.098520] pci 0000:01:00.0: supports D1 D2 [ 0.098595] pci 0000:00:01.0: bridge 32bit mmio: [0xec000000-0xedffffff] [ 0.098614] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe8000000-0xebffffff] [ 0.099647] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.100348] pci 0000:00:11.0: VIA IRQ router [1106:3177] [ 0.100896] NetLabel: Initializing [ 0.100907] NetLabel: domain hash size = 128 [ 0.100915] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.100973] NetLabel: unlabeled traffic allowed by default [ 0.101109] Switching to clocksource tsc [ 0.107788] AppArmor: AppArmor Filesystem Enabled [ 0.107812] pnp: PnP ACPI: disabled [ 0.107827] PnPBIOS: Scanning system for PnP BIOS support... [ 0.108267] PnPBIOS: Found PnP BIOS installation structure at 0xc00fbe80 [ 0.108288] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbeb0, dseg 0xf0000 [ 0.110504] PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver [ 0.110552] system 00:07: iomem range 0x0-0x9ffff could not be reserved [ 0.110572] system 00:07: iomem range 0xfffe0000-0xffffffff could not be reserved [ 0.110590] system 00:07: iomem range 0xfee00000-0xfee0ffff has been reserved [ 0.110608] system 00:07: iomem range 0x100000-0xffffff could not be reserved [ 0.110635] system 00:08: iomem range 0xf0000-0xf3fff could not be reserved [ 0.110707] system 00:08: iomem range 0xf4000-0xf7fff could not be reserved [ 0.110724] system 00:08: iomem range 0xf8000-0xfffff could not be reserved [ 0.110741] system 00:08: iomem range 0xd0000-0xd3fff has been reserved [ 0.110769] system 00:0b: ioport range 0x3f0-0x3f1 has been reserved [ 0.111508] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.111520] pci 0000:00:01.0: IO window: disabled [ 0.111540] pci 0000:00:01.0: MEM window: 0xec000000-0xedffffff [ 0.111558] pci 0000:00:01.0: PREFETCH window: 0xe8000000-0xebffffff [ 0.111596] pci 0000:00:01.0: setting latency timer to 64 [ 0.111615] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.111630] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.111646] pci_bus 0000:01: resource 1 mem: [0xec000000-0xedffffff] [ 0.111662] pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xebffffff] [ 0.111814] NET: Registered protocol family 2 [ 0.112239] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.114145] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.119876] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.122583] TCP: Hash tables configured (established 131072 bind 65536) [ 0.122598] TCP reno registered [ 0.123068] NET: Registered protocol family 1 [ 0.123144] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.123330] pci 0000:01:00.0: Boot video device [ 0.123743] Scanning for low memory corruption every 60 seconds [ 0.124105] audit: initializing netlink socket (disabled) [ 0.124149] type=2000 audit(1284413623.122:1): initialized [ 0.162603] Trying to unpack rootfs image as initramfs... [ 0.205414] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.223395] VFS: Disk quotas dquot_6.5.2 [ 0.223834] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.226862] fuse init (API version 7.13) [ 0.227305] msgmni has been set to 1347 [ 0.235056] alg: No test for stdrng (krng) [ 0.235371] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.235386] io scheduler noop registered [ 0.235396] io scheduler anticipatory registered [ 0.235406] io scheduler deadline registered [ 0.235626] io scheduler cfq registered (default) [ 0.236034] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.236133] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.241733] isapnp: Scanning for PnP cards... [ 0.248168] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.248369] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.248549] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.249451] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.249776] 00:10: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.307910] brd: module loaded [ 0.310291] loop: module loaded [ 0.310831] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 0.313021] Fixed MDIO Bus: probed [ 0.313186] PPP generic driver version 2.4.2 [ 0.313425] tun: Universal TUN/TAP device driver, 1.6 [ 0.313436] tun: (C) 1999-2004 Max Krasnyansky [ 0.313830] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.313902] PCI: setting IRQ 12 as level-triggered [ 0.313917] ehci_hcd 0000:00:10.3: found PCI INT D -> IRQ 12 [ 0.314037] ehci_hcd 0000:00:10.3: EHCI Host Controller [ 0.314201] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 [ 0.314363] ehci_hcd 0000:00:10.3: irq 12, io mem 0xee002000 [ 0.322838] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00 [ 0.323366] usb usb1: configuration #1 chosen from 1 choice [ 0.323518] hub 1-0:1.0: USB hub found [ 0.323565] hub 1-0:1.0: 6 ports detected [ 0.323792] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.323861] uhci_hcd: USB Universal Host Controller Interface driver [ 0.324050] PCI: setting IRQ 15 as level-triggered [ 0.324065] uhci_hcd 0000:00:10.0: found PCI INT A -> IRQ 15 [ 0.324093] uhci_hcd 0000:00:10.0: sharing IRQ 15 with 0000:00:08.0 [ 0.324147] uhci_hcd 0000:00:10.0: sharing IRQ 15 with 0000:00:12.0 [ 0.324185] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.324362] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 0.324428] uhci_hcd 0000:00:10.0: irq 15, io base 0x0000ec00 [ 0.324937] usb usb2: configuration #1 chosen from 1 choice [ 0.325100] hub 2-0:1.0: USB hub found [ 0.325140] hub 2-0:1.0: 2 ports detected [ 0.325322] PCI: setting IRQ 5 as level-triggered [ 0.325337] uhci_hcd 0000:00:10.1: found PCI INT B -> IRQ 5 [ 0.325427] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.325580] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 0.325638] uhci_hcd 0000:00:10.1: irq 5, io base 0x0000e800 [ 0.326120] usb usb3: configuration #1 chosen from 1 choice [ 0.326245] hub 3-0:1.0: USB hub found [ 0.326285] hub 3-0:1.0: 2 ports detected [ 0.326468] PCI: setting IRQ 11 as level-triggered [ 0.326482] uhci_hcd 0000:00:10.2: found PCI INT C -> IRQ 11 [ 0.326543] uhci_hcd 0000:00:10.2: sharing IRQ 11 with 0000:00:11.5 [ 0.326582] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.332158] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 0.332235] uhci_hcd 0000:00:10.2: irq 11, io base 0x0000e900 [ 0.332783] usb usb4: configuration #1 chosen from 1 choice [ 0.332916] hub 4-0:1.0: USB hub found [ 0.332960] hub 4-0:1.0: 2 ports detected [ 0.333348] PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1 [ 0.333360] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.333640] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.334136] mice: PS/2 mouse device common for all mice [ 0.334587] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.334651] rtc0: alarms up to one day, 114 bytes nvram [ 0.335126] device-mapper: uevent: version 1.0.3 [ 0.340107] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.340451] device-mapper: multipath: version 1.1.0 loaded [ 0.340464] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.341019] EISA: Probing bus 0 at eisa.0 [ 0.341064] Cannot allocate resource for EISA slot 4 [ 0.341075] Cannot allocate resource for EISA slot 5 [ 0.341106] EISA: Detected 0 cards. [ 0.341117] cpuidle: using governor ladder [ 0.341128] cpuidle: using governor menu [ 0.343307] TCP cubic registered [ 0.344073] NET: Registered protocol family 10 [ 0.346087] lo: Disabled Privacy Extensions [ 0.352222] NET: Registered protocol family 17 [ 0.352410] Using IPI No-Shortcut mode [ 0.352818] registered taskstats version 1 [ 0.353586] rtc_cmos 00:03: setting system clock to 2010-09-13 21:33:44 UTC (1284413624) [ 0.353603] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.353612] EDD information not available. [ 0.940203] isapnp: No Plug & Play device found [ 0.940281] usb 1-5: new high speed USB device using ehci_hcd and address 4 [ 1.075289] usb 1-5: configuration #1 chosen from 1 choice [ 1.315812] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 1.504710] usb 2-1: configuration #1 chosen from 1 choice [ 1.746809] usb 2-2: new full speed USB device using uhci_hcd and address 3 [ 1.923780] usb 2-2: configuration #1 chosen from 1 choice [ 1.930457] hub 2-2:1.0: USB hub found [ 1.932944] hub 2-2:1.0: 3 ports detected [ 2.224971] usb 2-2.1: new full speed USB device using uhci_hcd and address 4 [ 2.372744] usb 2-2.1: configuration #1 chosen from 1 choice [ 2.501965] Freeing initrd memory: 12799k freed [ 2.577782] Freeing unused kernel memory: 620k freed [ 2.581774] Write protecting the kernel text: 4540k [ 2.581916] Write protecting the kernel read-only data: 1668k [ 2.687123] udev: starting version 151 [ 3.295639] Linux agpgart interface v0.103 [ 3.310184] pata_via 0000:00:11.1: version 0.3.4 [ 3.310710] scsi0 : pata_via [ 3.345059] scsi1 : pata_via [ 3.345624] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xea00 irq 14 [ 3.345642] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xea08 irq 15 [ 3.385900] usbcore: registered new interface driver hiddev [ 3.407051] vga16fb: initializing [ 3.407081] vga16fb: mapped to 0xc00a0000 [ 3.407661] fb0: VGA16 VGA frame buffer device [ 3.419081] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input1 [ 3.420078] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:10.0-1/input0 [ 3.442792] input: Silitek IBM USB HUB KEYBOARD as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2.1/2-2.1:1.0/input/input2 [ 3.443600] generic-usb 0003:04B3:3005.0002: input,hidraw1: USB HID v1.10 Keyboard [Silitek IBM USB HUB KEYBOARD] on usb-0000:00:10.0-2.1/input0 [ 3.443749] usbcore: registered new interface driver usbhid [ 3.444278] usbhid: v2.6:USB HID core driver [ 3.446418] agpgart: Detected VIA CLE266 chipset [ 3.453279] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe4000000 [ 3.457220] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 3.457244] via-rhine: Broken BIOS detected, avoid_D3 enabled. [ 3.457354] via-rhine 0000:00:12.0: found PCI INT A -> IRQ 15 [ 3.457383] via-rhine 0000:00:12.0: sharing IRQ 15 with 0000:00:08.0 [ 3.457402] via-rhine 0000:00:12.0: sharing IRQ 15 with 0000:00:10.0 [ 3.465510] eth0: VIA Rhine II at 0xee003000, 00:e0:c5:52:ef:f5, IRQ 15. [ 3.466238] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. [ 3.507299] ata1.00: ATA-5: HITACHI_DK23DA-20, 00J2A0D2, max UDMA/100 [ 3.507318] ata1.00: 39070080 sectors, multi 0: LBA [ 3.507402] ata1.00: limited to UDMA/33 due to 40-wire cable [ 3.523170] ata1.00: configured for UDMA/33 [ 3.523603] scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23DA-2 00J2 PQ: 0 ANSI: 5 [ 3.524268] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.524653] ata2: port disabled. ignoring. [ 3.525578] sd 0:0:0:0: [sda] 39070080 512-byte logical blocks: (20.0 GB/18.6 GiB) [ 3.525762] sd 0:0:0:0: [sda] Write Protect is off [ 3.525777] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.525872] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.526466] sda: sda1 sda2 < sda5 > [ 3.568339] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.788152] Console: switching to colour frame buffer device 80x30 [ 5.242862] xor: automatically using best checksumming function: pIII_sse [ 5.262673] pIII_sse : 1786.000 MB/sec [ 5.262686] xor: using function: pIII_sse (1786.000 MB/sec) [ 5.320510] device-mapper: dm-raid45: initialized v0.2594b [ 5.728556] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 21.288592] Adding 860152k swap on /dev/sda5. Priority:-1 extents:1 across:860152k [ 21.566563] udev: starting version 151 [ 22.213888] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 22.932854] lp: driver loaded but no devices found [ 23.684270] type=1505 audit(1284413647.829:2): operation="profile_load" pid=433 name="/sbin/dhclient3" [ 23.685397] type=1505 audit(1284413647.829:3): operation="profile_load" pid=433 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 23.686040] type=1505 audit(1284413647.829:4): operation="profile_load" pid=433 name="/usr/lib/connman/scripts/dhclient-script" [ 23.702410] irda_init() [ 23.702471] NET: Registered protocol family 23 [ 24.014123] cfg80211: Calling CRDA to update world regulatory domain [ 24.136276] cfg80211: World regulatory domain updated: [ 24.136296] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 24.136314] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.136330] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.136346] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.136361] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.136376] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.798972] usb 1-5: reset high speed USB device using ehci_hcd and address 4 [ 25.278467] type=1505 audit(1284413649.421:5): operation="profile_load" pid=550 name="/usr/share/gdm/guest-session/Xsession" [ 25.337432] type=1505 audit(1284413649.481:6): operation="profile_replace" pid=553 name="/sbin/dhclient3" [ 25.338840] type=1505 audit(1284413649.481:7): operation="profile_replace" pid=553 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 25.353023] phy0: Selected rate control algorithm 'minstrel' [ 25.357616] zd1211rw 1-5:1.0: phy0 [ 25.357946] usbcore: registered new interface driver zd1211rw [ 25.380037] type=1505 audit(1284413649.525:8): operation="profile_replace" pid=553 name="/usr/lib/connman/scripts/dhclient-script" [ 25.580561] type=1505 audit(1284413649.725:9): operation="profile_load" pid=558 name="/usr/bin/evince" [ 25.773539] type=1505 audit(1284413649.917:10): operation="profile_load" pid=558 name="/usr/bin/evince-previewer" [ 25.825113] usb 1-5: firmware: requesting zd1211/zd1211_ub [ 25.858012] type=1505 audit(1284413650.001:11): operation="profile_load" pid=558 name="/usr/bin/evince-thumbnailer" [ 25.890889] usb 1-5: firmware: requesting zd1211/zd1211_uphr [ 26.138340] zd1211rw 1-5:1.0: firmware version 4605 [ 26.179355] zd1211rw 1-5:1.0: zd1211 chip 0ace:1211 v4330 high 00-0e-3b RF2959_RF pa0 ----- [ 26.181819] cfg80211: Calling CRDA for country: US [ 26.238573] cfg80211: Regulatory domain changed to country: US [ 26.238592] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 26.238609] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 26.238625] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 26.238640] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.238656] (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.238671] (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.238687] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 26.241067] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 26.270218] eth0: link down [ 26.280697] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.926538] VIA 82xx Audio 0000:00:11.5: found PCI INT C -> IRQ 11 [ 26.926591] VIA 82xx Audio 0000:00:11.5: sharing IRQ 11 with 0000:00:10.2 [ 26.928501] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 28.244458] ppdev: user-space parallel port driver [ 29.324158] [drm] Initialized drm 1.1.0 20060810 [ 29.367210] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0 [ 29.381649] agpgart-via 0000:00:00.0: AGP 2.0 bridge [ 29.381712] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode [ 29.381838] pci 0000:01:00.0: putting AGP V2 device into 4x mode [ 38.923084] wlan0: deauthenticating from 00:1f:90:ce:fd:9c by local choice (reason=3) [ 38.979317] wlan0: direct probe to AP 00:1f:90:ce:fd:9c (try 1) [ 38.981833] wlan0: direct probe responded [ 38.981857] wlan0: authenticate with AP 00:1f:90:ce:fd:9c (try 1) [ 38.983938] wlan0: authenticated [ 38.984029] wlan0: associate with AP 00:1f:90:ce:fd:9c (try 1) [ 38.986217] wlan0: RX AssocResp from 00:1f:90:ce:fd:9c (capab=0x421 status=0 aid=1) [ 38.986236] wlan0: associated [ 39.000848] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 39.018860] cfg80211: Calling CRDA for country: US [ 39.116684] cfg80211: Received country IE: [ 39.116707] cfg80211: Regulatory domain: US [ 39.116716] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 39.116733] (2402000 KHz - 2477000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm) [ 39.116745] cfg80211: CRDA thinks this should applied: [ 39.116754] cfg80211: Regulatory domain: US [ 39.116763] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 39.116779] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 39.116795] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 39.116810] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 39.116826] (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 39.116841] (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 39.116857] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 39.116867] cfg80211: We intersect both of these and get: [ 39.116877] cfg80211: Regulatory domain: 98 [ 39.116886] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 39.116901] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 39.116929] cfg80211: Disabling channel 2467 MHz on phy0 due to Country IE [ 39.116942] cfg80211: Disabling channel 2472 MHz on phy0 due to Country IE [ 39.116955] cfg80211: Disabling channel 2484 MHz on phy0 due to Country IE [ 39.116974] cfg80211: Current regulatory domain updated by AP to: US [ 39.116985] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 39.117001] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 49.009988] wlan0: no IPv6 routers present [ 857.572564] RTAI[hal]: ERROR, LOCAL APIC CONFIGURED BUT NOT AVAILABLE/ENABLED. [ 971.897588] RTAI[hal]: ERROR, LOCAL APIC CONFIGURED BUT NOT AVAILABLE/ENABLED. [ 1014.765356] RTAI[hal]: ERROR, LOCAL APIC CONFIGURED BUT NOT AVAILABLE/ENABLED.