Print file information:
RUN_IN_PLACE=no
LINUXCNC_DIR=
LINUXCNC_BIN_DIR=/usr/bin
LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc
LINUXCNC_SCRIPT_DIR=
LINUXCNC_RTLIB_DIR=/usr/realtime-2.6.32-122-rtai/modules/linuxcnc
LINUXCNC_CONFIG_DIR=
LINUXCNC_LANG_DIR=/usr/share/linuxcnc/tcl/msgs
INIVAR=inivar
HALCMD=halcmd
LINUXCNC_EMCSH=/usr/bin/wish8.5
LINUXCNC - 2.5.0
Machine configuration directory is '/home/johnb/linuxcnc/configs/sim/axis'
Machine configuration file is 'axis.ini'
INIFILE=/home/johnb/linuxcnc/configs/sim/axis/axis.ini
PARAMETER_FILE=sim.var
TASK=milltask
HALUI=halui
DISPLAY=axis
Starting LinuxCNC...
Starting LinuxCNC server program: linuxcncsvr
Loading Real Time OS, RTAPI, and HAL_LIB modules
Realtime system did not load
Shutting down and cleaning up LinuxCNC...
Killing task linuxcncsvr, PID=1556
Removing HAL_LIB, RTAPI, and Real Time OS modules
Removing NML shared memory segments
Cleanup done

Debug file information:
Can not find -sec MOT -var MOT -num 1
Can not find -sec IO -var IO -num 1
Can not find -sec LINUXCNC -var NML_FILE -num 1
Can not find -sec EMC -var NML_FILE -num 1
insmod: error inserting '/usr/realtime-2.6.32-122-rtai/modules/rtai_hal.ko': -1 Operation not permitted
1556
PID TTY STAT TIME COMMAND
Stopping realtime threads
RTAPI: ERROR: could not open shared memory (errno=2)
/usr/bin/linuxcnc: line 428: 1594 Segmentation fault $HALCMD stop
Unloading hal components
RTAPI: ERROR: could not open shared memory (errno=2)
/usr/bin/linuxcnc: line 428: 1595 Segmentation fault $HALCMD unload all
RTAPI: ERROR: could not open shared memory (errno=2)
RTAPI: ERROR: could not open shared memory (errno=2)
RTAPI: ERROR: could not open shared memory (errno=2)
RTAPI: ERROR: could not open shared memory (errno=2)
RTAPI: ERROR: could not open shared memory (errno=2)
RTAPI: ERROR: could not open shared memory (errno=2)
RTAPI: ERROR: could not open shared memory (errno=2)
RTAPI: ERROR: could not open shared memory (errno=2)
RTAPI: ERROR: could not open shared memory (errno=2)
RTAPI: ERROR: could not open shared memory (errno=2)
ERROR: Module hal_lib does not exist in /proc/modules
ERROR: Module rtapi does not exist in /proc/modules
ERROR: Module rtai_math does not exist in /proc/modules
ERROR: Module rtai_sem does not exist in /proc/modules
ERROR: Module rtai_fifos does not exist in /proc/modules
ERROR: Module rtai_sched does not exist in /proc/modules
ERROR: Module rtai_hal does not exist in /proc/modules

Kernel message information:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-122-rtai (root@moses-6core) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #rtai SMP Tue Jul 27 12:44:07 CDT 2010 (Ubuntu 2.6.32-122.35.rtai-rtai 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000ffec000 (usable)
[ 0.000000] BIOS-e820: 000000000ffec000 - 000000000ffef000 (ACPI data)
[ 0.000000] BIOS-e820: 000000000ffef000 - 000000000ffff000 (reserved)
[ 0.000000] BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0xffec max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000000ffec000 (usable)
[ 0.000000] modified: 000000000ffec000 - 000000000ffef000 (ACPI data)
[ 0.000000] modified: 000000000ffef000 - 000000000ffff000 (reserved)
[ 0.000000] modified: 000000000ffff000 - 0000000010000000 (ACPI NVS)
[ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-000000000ffec000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 000fc00000 page 2M
[ 0.000000] 000fc00000 - 000ffec000 page 4k
[ 0.000000] kernel direct mapping tables up to ffec000 @ 7000-c000
[ 0.000000] RAMDISK: 0b3a9000 - 0c030f16
[ 0.000000] ACPI: RSDP 000f5a90 00014 (v00 ASUS )
[ 0.000000] ACPI: RSDT 0ffec000 0002C (v01 ASUS CUBX-L 30303031 MSFT 31313031)
[ 0.000000] ACPI: FACP 0ffec080 00074 (v01 ASUS CUBX-L 30303031 MSFT 31313031)
[ 0.000000] ACPI: DSDT 0ffec100 02626 (v01 ASUS CUBX-L 00001000 MSFT 0100000B)
[ 0.000000] ACPI: FACS 0ffff000 00040
[ 0.000000] ACPI: BOOT 0ffec040 00028 (v01 ASUS CUBX-L 30303031 MSFT 31313031)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0ffec000
[ 0.000000] low ram: 0 - 0ffec000
[ 0.000000] node 0 low ram: 00000000 - 0ffec000
[ 0.000000] node 0 bootmap 00008000 - 0000a000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 000ffec000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008b0db8] TEXT DATA BSS ==> [0000100000 - 00008b0db8]
[ 0.000000] #4 [000b3a9000 - 000c030f16] RAMDISK ==> [000b3a9000 - 000c030f16]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00008b1000 - 00008b4119] BRK ==> [00008b1000 - 00008b4119]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000008000 - 000000a000] BOOTMAP ==> [0000008000 - 000000a000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0000ffec
[ 0.000000] HighMem 0x0000ffec -> 0x0000ffec
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0000ffec
[ 0.000000] On node 0 totalpages: 65415
[ 0.000000] free_area_init_node: node 0, pgdat c07470e0, node_mem_map c1001000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 60940 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 24 pages/cpu @c1400000 s74936 r0 d23368 u4194304
[ 0.000000] pcpu-alloc: s74936 r0 d23368 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64903
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-122-rtai root=UUID=b123a91c-694e-48d8-88c1-b391a60a5041 ro quiet splash
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 1310320 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 237064k/262064k available (4539k kernel code, 24380k reserved, 1928k data, 620k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xd07ec000 - 0xff7fe000 ( 752 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcffec000 ( 255 MB)
[ 0.000000] .init : 0xc0751000 - 0xc07ec000 ( 620 kB)
[ 0.000000] .data : 0xc056ecbc - 0xc0750e68 (1928 kB)
[ 0.000000] .text : 0xc0100000 - 0xc056ecbc (4539 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] I-pipe 2.6-03: pipeline enabled.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 802.895 MHz processor.
[ 0.004012] Calibrating delay loop (skipped), value calculated using timer frequency.. 1605.79 BogoMIPS (lpj=3211580)
[ 0.004073] Security Framework initialized
[ 0.004157] AppArmor: AppArmor initialized
[ 0.004183] Mount-cache hash table entries: 512
[ 0.008368] Initializing cgroup subsys ns
[ 0.008382] Initializing cgroup subsys cpuacct
[ 0.008397] Initializing cgroup subsys memory
[ 0.008427] Initializing cgroup subsys devices
[ 0.008437] Initializing cgroup subsys freezer
[ 0.008445] Initializing cgroup subsys net_cls
[ 0.008508] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.008520] CPU: L2 cache: 256K
[ 0.008534] mce: CPU supports 5 MCE banks
[ 0.008585] Performance Events:
[ 0.008593] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.008602] no hardware sampling interrupt available.
[ 0.008610] p6 PMU driver.
[ 0.008667] ... version: 0
[ 0.008674] ... bit width: 32
[ 0.008682] ... generic registers: 2
[ 0.008689] ... value mask: 00000000ffffffff
[ 0.008698] ... max period: 000000007fffffff
[ 0.008705] ... fixed-purpose events: 0
[ 0.008713] ... event mask: 0000000000000003
[ 0.008728] Checking 'hlt' instruction... OK.
[ 0.025571] SMP alternatives: switching to UP code
[ 0.037368] Freeing SMP alternatives: 31k freed
[ 0.037421] ACPI: Core revision 20090903
[ 0.044427] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.044748] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.044769] ftrace: allocating 21003 entries in 42 pages
[ 0.061322] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.061339] weird, boot CPU (#0) not listed by the BIOS.
[ 0.061346] SMP motherboard not detected.
[ 0.061355] Local APIC not detected. Using dummy APIC emulation.
[ 0.061361] SMP disabled
[ 0.062174] Brought up 1 CPUs
[ 0.062192] Total of 1 processors activated (1605.79 BogoMIPS).
[ 0.063075] CPU0 attaching NULL sched-domain.
[ 0.063537] devtmpfs: initialized
[ 0.064734] regulator: core version 0.5
[ 0.064914] NET: Registered protocol family 16
[ 0.065305] EISA bus registered
[ 0.065331] ACPI: bus type pci registered
[ 0.067265] PCI: PCI BIOS revision 2.10 entry at 0xf08c0, last bus=1
[ 0.067274] PCI: Using configuration type 1 for base access
[ 0.070013] bio: create slab <bio-0> at 0
[ 0.071154] ACPI: EC: Look up EC in DSDT
[ 0.082589] ACPI: Interpreter enabled
[ 0.082602] ACPI: (supports S0 S5)
[ 0.082636] ACPI: Using PIC for interrupt routing
[ 0.096958] ACPI: No dock devices found.
[ 0.097326] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.097447] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe4000000-0xe7ffffff]
[ 0.097647] pci 0000:00:04.1: reg 20 io port: [0xb800-0xb80f]
[ 0.097723] pci 0000:00:04.2: reg 20 io port: [0xb400-0xb41f]
[ 0.097767] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[ 0.097772] * this clock source is slow. Consider trying other clock sources
[ 0.097829] pci 0000:00:04.3: quirk: region e400-e43f claimed by PIIX4 ACPI
[ 0.097841] pci 0000:00:04.3: quirk: region e800-e80f claimed by PIIX4 SMB
[ 0.097908] pci 0000:00:09.0: reg 10 32bit mmio: [0xe1000000-0xe1000fff]
[ 0.097923] pci 0000:00:09.0: reg 14 io port: [0xb000-0xb03f]
[ 0.097938] pci 0000:00:09.0: reg 18 32bit mmio: [0xe0800000-0xe08fffff]
[ 0.097966] pci 0000:00:09.0: reg 30 32bit mmio pref: [0x000000-0x0fffff]
[ 0.097994] pci 0000:00:09.0: supports D1 D2
[ 0.098003] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.098014] pci 0000:00:09.0: PME# disabled
[ 0.098063] pci 0000:00:0b.0: reg 10 io port: [0xa800-0xa83f]
[ 0.098118] pci 0000:00:0b.0: supports D2
[ 0.098126] pci 0000:00:0b.0: PME# supported from D0 D2 D3hot
[ 0.098137] pci 0000:00:0b.0: PME# disabled
[ 0.098225] pci 0000:01:00.0: reg 10 32bit mmio: [0xe2000000-0xe2ffffff]
[ 0.098241] pci 0000:01:00.0: reg 14 io port: [0xd800-0xd8ff]
[ 0.098255] pci 0000:01:00.0: reg 18 32bit mmio: [0xe1800000-0xe1800fff]
[ 0.098284] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xe3fe0000-0xe3ffffff]
[ 0.098358] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[ 0.098369] pci 0000:00:01.0: bridge 32bit mmio: [0xe1800000-0xe3dfffff]
[ 0.098382] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe3f00000-0xe3ffffff]
[ 0.098398] pci_bus 0000:00: on NUMA node 0
[ 0.098413] ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
[ 0.101520] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.101827] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.102083] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.102390] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.102727] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.102738] vgaarb: loaded
[ 0.103153] SCSI subsystem initialized
[ 0.103399] libata version 3.00 loaded.
[ 0.103647] usbcore: registered new interface driver usbfs
[ 0.103689] usbcore: registered new interface driver hub
[ 0.103796] usbcore: registered new device driver usb
[ 0.104295] ACPI: WMI: Mapper loaded
[ 0.104302] PCI: Using ACPI for IRQ routing
[ 0.104658] NetLabel: Initializing
[ 0.104665] NetLabel: domain hash size = 128
[ 0.104671] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.104716] NetLabel: unlabeled traffic allowed by default
[ 0.104825] Switching to clocksource tsc
[ 0.110498] AppArmor: AppArmor Filesystem Enabled
[ 0.110562] pnp: PnP ACPI init
[ 0.110620] ACPI: bus type pnp registered
[ 0.111256] pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:09.0 BAR 6 (0x0-0xfffff), disabling
[ 0.111272] pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:09.0 BAR 6 (0x0-0xfffff), disabling
[ 0.120780] pnp: PnP ACPI: found 14 devices
[ 0.120790] ACPI: ACPI bus type pnp unregistered
[ 0.120804] PnPBIOS: Disabled by ACPI PNP
[ 0.120841] system 00:00: iomem range 0x100000-0xfffffff could not be reserved
[ 0.120854] system 00:00: iomem range 0xfffe0000-0xffffffff could not be reserved
[ 0.120878] system 00:02: ioport range 0x3f0-0x3f1 has been reserved
[ 0.120889] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.120910] system 00:03: ioport range 0xe400-0xe43f has been reserved
[ 0.120921] system 00:03: ioport range 0xe800-0xe80f has been reserved
[ 0.156141] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.156153] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 0.156166] pci 0000:00:01.0: MEM window: 0xe1800000-0xe3dfffff
[ 0.156178] pci 0000:00:01.0: PREFETCH window: 0xe3f00000-0xe3ffffff
[ 0.156208] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.156218] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.156228] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
[ 0.156238] pci_bus 0000:01: resource 1 mem: [0xe1800000-0xe3dfffff]
[ 0.156248] pci_bus 0000:01: resource 2 pref mem [0xe3f00000-0xe3ffffff]
[ 0.156366] NET: Registered protocol family 2
[ 0.156677] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.157639] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.157838] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.158028] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.158037] TCP reno registered
[ 0.158301] NET: Registered protocol family 1
[ 0.158358] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.158438] pci 0000:00:09.0: Firmware left e100 interrupts enabled; disabling
[ 0.158462] pci 0000:01:00.0: Boot video device
[ 0.158723] Simple Boot Flag at 0x3a set to 0x1
[ 0.159012] Scanning for low memory corruption every 60 seconds
[ 0.159466] audit: initializing netlink socket (disabled)
[ 0.159506] type=2000 audit(4102437494.159:1): initialized
[ 0.183059] Trying to unpack rootfs image as initramfs...
[ 0.207648] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.223888] VFS: Disk quotas dquot_6.5.2
[ 0.224210] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.226543] fuse init (API version 7.13)
[ 0.226883] msgmni has been set to 463
[ 0.227782] alg: No test for stdrng (krng)
[ 0.227925] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.227935] io scheduler noop registered
[ 0.227943] io scheduler anticipatory registered
[ 0.227950] io scheduler deadline registered
[ 0.228112] io scheduler cfq registered (default)
[ 0.228414] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.228492] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.228710] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.228724] ACPI: Power Button [PWRB]
[ 0.228913] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.228923] ACPI: Power Button [PWRF]
[ 0.235801] isapnp: Scanning for PnP cards...
[ 0.244522] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.244706] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.244904] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.245774] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.246050] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.297832] brd: module loaded
[ 0.304169] loop: module loaded
[ 0.304552] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.304934] ata_piix 0000:00:04.1: version 2.13
[ 0.305401] scsi0 : ata_piix
[ 0.311681] scsi1 : ata_piix
[ 0.313381] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
[ 0.313392] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
[ 0.314712] Fixed MDIO Bus: probed
[ 0.314862] PPP generic driver version 2.4.2
[ 0.315396] tun: Universal TUN/TAP device driver, 1.6
[ 0.315404] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.315770] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.315833] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.315875] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.316867] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
[ 0.316878] PCI: setting IRQ 5 as level-triggered
[ 0.316891] uhci_hcd 0000:00:04.2: PCI INT D -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 0.316914] uhci_hcd 0000:00:04.2: UHCI Host Controller
[ 0.317047] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[ 0.317103] uhci_hcd 0000:00:04.2: irq 5, io base 0x0000b400
[ 0.317452] usb usb1: configuration #1 chosen from 1 choice
[ 0.317543] hub 1-0:1.0: USB hub found
[ 0.317574] hub 1-0:1.0: 2 ports detected
[ 0.317869] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.326160] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.326189] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.326711] mice: PS/2 mouse device common for all mice
[ 0.327164] rtc_cmos 00:05: RTC can wake from S4
[ 0.327315] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.327352] rtc0: alarms up to one month, 242 bytes nvram
[ 0.327704] device-mapper: uevent: version 1.0.3
[ 0.331690] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.331997] device-mapper: multipath: version 1.1.0 loaded
[ 0.332008] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.332462] EISA: Probing bus 0 at eisa.0
[ 0.332552] EISA: Detected 0 cards.
[ 0.332563] cpuidle: using governor ladder
[ 0.332570] cpuidle: using governor menu
[ 0.334118] TCP cubic registered
[ 0.334661] NET: Registered protocol family 10
[ 0.340936] lo: Disabled Privacy Extensions
[ 0.342069] NET: Registered protocol family 17
[ 0.342200] Using IPI No-Shortcut mode
[ 0.342565] registered taskstats version 1
[ 0.342923] rtc_cmos 00:05: setting system clock to 1999-12-31 21:58:15 UTC (946677495)
[ 0.342934] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.342941] EDD information not available.
[ 0.356996] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.504312] ata1.00: ATA-6: Maxtor 33073H4, BAC51KJ0, max UDMA/100
[ 0.504327] ata1.00: 60030432 sectors, multi 16: LBA
[ 0.512012] ata2.00: ATAPI: 10X8X32, 8.CZ, max MWDMA2
[ 0.512109] ata2.01: ATAPI: SAMSUNG CD-ROM SC-148F, PS06, max MWDMA2
[ 0.519888] ata2.00: configured for MWDMA2
[ 0.520073] ata1.00: configured for UDMA/33
[ 0.527730] ata2.01: configured for MWDMA2
[ 0.935217] isapnp: No Plug & Play device found
[ 0.935697] scsi 0:0:0:0: Direct-Access ATA Maxtor 33073H4 BAC5 PQ: 0 ANSI: 5
[ 0.936213] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.936708] sd 0:0:0:0: [sda] 60030432 512-byte logical blocks: (30.7 GB/28.6 GiB)
[ 0.936936] scsi 1:0:0:0: CD-ROM ATAPI CD-R/RW 10X8X32 8.CZ PQ: 0 ANSI: 5
[ 0.937590] sd 0:0:0:0: [sda] Write Protect is off
[ 0.937601] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.937846] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.938705] sda:sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 0.940857] Uniform CD-ROM driver Revision: 3.20
[ 0.941245] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.941449] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 0.942077] scsi 1:0:1:0: CD-ROM SAMSUNG CD-ROM SC-148F PS06 PQ: 0 ANSI: 5
[ 0.948625] sr1: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray
[ 0.949003] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 0.949206] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 0.959063] sda1 sda2 < sda5 >
[ 0.995812] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.633853] Freeing initrd memory: 12831k freed
[ 1.705036] Freeing unused kernel memory: 620k freed
[ 1.708559] Write protecting the kernel text: 4540k
[ 1.708652] Write protecting the kernel read-only data: 1668k
[ 1.784921] udev: starting version 151
[ 2.441391] Linux agpgart interface v0.103
[ 2.469522] Floppy drive(s): fd0 is 1.44M
[ 2.477996] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[ 2.499009] FDC 0 is a post-1991 82077
[ 2.502744] vga16fb: initializing
[ 2.502764] vga16fb: mapped to 0xc00a0000
[ 2.503209] fb0: VGA16 VGA frame buffer device
[ 2.509190] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe4000000
[ 2.521484] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 2.521497] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.521606] e100 0000:00:09.0: PCI INT A -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 2.543935] e100 0000:00:09.0: PME# disabled
[ 2.624701] e100: eth0: e100_probe: addr 0xe1000000, irq 5, MAC addr 00:02:b3:1d:6d:6c
[ 2.682546] Console: switching to colour frame buffer device 80x30
[ 3.579552] xor: automatically using best checksumming function: pIII_sse
[ 3.596030] pIII_sse : 1644.000 MB/sec
[ 3.596039] xor: using function: pIII_sse (1644.000 MB/sec)
[ 3.641097] device-mapper: dm-raid45: initialized v0.2594b
[ 3.997345] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 3.997364] EXT4-fs (sda1): write access will be enabled during recovery
[ 8.733922] EXT4-fs (sda1): recovery complete
[ 8.734803] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 11.698202] Adding 731128k swap on /dev/sda5. Priority:-1 extents:1 across:731128k
[ 12.145044] udev: starting version 151
[ 14.371161] lp: driver loaded but no devices found
[ 14.375531] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.678948] ACPI: resource piix4_smbus [0xe800-0xe807] conflicts with ACPI region SM00 [0xe800-0xe806]
[ 14.678963] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.743923] parport_pc 00:09: reported by Plug and Play ACPI
[ 14.744131] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 14.840545] lp0: using parport0 (interrupt-driven).
[ 14.901086] psmouse serio1: ID: 10 00 64
[ 14.979009] ppdev: user-space parallel port driver
[ 15.509459] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 15.617014] type=1505 audit(946695510.773:2): operation="profile_load" pid=445 name="/sbin/dhclient3"
[ 15.618458] type=1505 audit(946695510.773:3): operation="profile_load" pid=445 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 15.619291] type=1505 audit(946695510.773:4): operation="profile_load" pid=445 name="/usr/lib/connman/scripts/dhclient-script"
[ 15.621032] type=1505 audit(946695510.777:5): operation="profile_replace" pid=464 name="/sbin/dhclient3"
[ 15.622621] type=1505 audit(946695510.777:6): operation="profile_replace" pid=464 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 15.623489] type=1505 audit(946695510.777:7): operation="profile_replace" pid=464 name="/usr/lib/connman/scripts/dhclient-script"
[ 18.221630] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 18.221643] PCI: setting IRQ 10 as level-triggered
[ 18.221656] ENS1371 0000:00:0b.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 18.823838] type=1505 audit(946695513.977:8): operation="profile_load" pid=679 name="/usr/share/gdm/guest-session/Xsession"
[ 18.835040] type=1505 audit(946695513.989:9): operation="profile_replace" pid=680 name="/sbin/dhclient3"
[ 18.837328] type=1505 audit(946695513.993:10): operation="profile_replace" pid=680 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 18.838203] type=1505 audit(946695513.993:11): operation="profile_replace" pid=680 name="/usr/lib/connman/scripts/dhclient-script"
[ 21.207329] e100 0000:00:09.0: firmware: requesting e100/d101m_ucode.bin
[ 21.289371] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 187.716888] RTAI[hal]: ERROR, LOCAL APIC CONFIGURED BUT NOT AVAILABLE/ENABLED.
[ 188.868636] __ratelimit: 18 callbacks suppressed
[ 188.868652] halcmd[1594]: segfault at 8 ip 00c3e6bc sp bfde9eb0 error 6 in liblinuxcnchal.so.0[c39000+8000]
[ 188.879005] halcmd[1595]: segfault at 8 ip 00e8c6bc sp bfd2dc70 error 6 in liblinuxcnchal.so.0[e87000+8000]
[ 188.912518] halcmd[1598]: segfault at 8 ip 00c756bc sp bfa2ceb0 error 6 in liblinuxcnchal.so.0[c70000+8000]
[ 189.163054] halcmd[1602]: segfault at 8 ip 004316bc sp bfbc0fb0 error 6 in liblinuxcnchal.so.0[42c000+8000]
[ 189.387063] halcmd[1606]: segfault at 8 ip 0056d6bc sp bfb38bc0 error 6 in liblinuxcnchal.so.0[568000+8000]
[ 189.615056] halcmd[1610]: segfault at 8 ip 00b056bc sp bfcfab60 error 6 in liblinuxcnchal.so.0[b00000+8000]
[ 189.839076] halcmd[1614]: segfault at 8 ip 00da26bc sp bfb70100 error 6 in liblinuxcnchal.so.0[d9d000+8000]
[ 190.074358] halcmd[1618]: segfault at 8 ip 008016bc sp bfd426d0 error 6 in liblinuxcnchal.so.0[7fc000+8000]
[ 190.302199] halcmd[1622]: segfault at 8 ip 00e826bc sp bfd6d1e0 error 6 in liblinuxcnchal.so.0[e7d000+8000]
[ 190.527034] halcmd[1626]: segfault at 8 ip 001616bc sp bf919e20 error 6 in liblinuxcnchal.so.0[15c000+8000]