Low budget plasma setup, what do I need?

More
11 Jul 2019 15:51 #139112 by tecno

With a Chinacom plasma you have to be your own R&D department.


I am very much aware of that but I am not going to have this for making money, just my hobby.

Please Log in or Create an account to join the conversation.

More
11 Jul 2019 21:11 #139127 by tommylight

With a Chinacom plasma you have to be your own R&D department.


I am very much aware of that but I am not going to have this for making money, just my hobby.


Wait, a hobby using the plasma or a hobby messing with the plasma ???
I am confused ! :) :) :)

Please Log in or Create an account to join the conversation.

More
12 Jul 2019 06:38 #139146 by tecno
It gets even better ...... an old fart messing around with plasma :lol:

Please Log in or Create an account to join the conversation.

More
12 Jul 2019 06:55 #139147 by rodw
Well me for one, building the machine was the fun bit!

Please Log in or Create an account to join the conversation.

More
12 Jul 2019 07:00 #139148 by tecno
I agree to that Rod, it will take some time but it will be ready sooner or later ;)

HavenĀ“t even started to cut linears or alu extrusions yet. Still time to make changes.
The following user(s) said Thank You: rodw

Please Log in or Create an account to join the conversation.

More
12 Jul 2019 07:11 #139150 by pl7i92
the second one will be fixing all the errors of the first
thats why we got 6 in shop LOL

its just the bad feeling on a misstahe to got the money spend

thats why you startet at low budget it is cheep if a error occurs

the low cost we offer is under 700USD including plasma al Electronics ,Hardware
to the education use
Attachments:

Please Log in or Create an account to join the conversation.

More
12 Jul 2019 07:43 #139157 by thefabricator03

the low cost we offer is under 700USD including plasma al Electronics ,Hardware
to the education use


Do you have a website showing your machines? I am interested to see your designs.

Please Log in or Create an account to join the conversation.

More
09 Aug 2019 15:48 #141787 by tecno
Have been working on my controller. Slowly it's coming together to run some tests.



Attachments:
The following user(s) said Thank You: thefabricator03

Please Log in or Create an account to join the conversation.

More
09 Aug 2019 16:42 #141795 by tommylight
That looks nice !
The following user(s) said Thank You: tecno

Please Log in or Create an account to join the conversation.

More
09 Aug 2019 23:54 #141824 by phillc54
That is too neat... ;)

Please Log in or Create an account to join the conversation.

Moderators: snowgoer540
Time to create page: 0.395 seconds
Powered by Kunena Forum