issues with cnc 2.9

11 months 3 weeks ago #338094 by davmer42

issues with cnc 2.9 was created by davmer42

Upgraded to deb12 and machine set up great. However when I load a work file I get a weird pattern. The file is one that I've used many times.

Please Log in or Create an account to join the conversation.

11 months 3 weeks ago #338095 by tommylight

Replied by tommylight on topic issues with cnc 2.9

Screenshots?

Please Log in or Create an account to join the conversation.

11 months 3 weeks ago #338155 by davmer42

Replied by davmer42 on topic issues with cnc 2.9

I had loaded the images, must have done it wrong...

Please Log in or Create an account to join the conversation.

11 months 3 weeks ago #338162 by davmer42

Replied by davmer42 on topic issues with cnc 2.9

Here is the full gcode. This runs fine in my simulator, and also ran fine in vs 2.8.

Please Log in or Create an account to join the conversation.

11 months 3 weeks ago #338179 by Aciera

Replied by Aciera on topic issues with cnc 2.9

seems that you have a typo, try 'M3 S0' as your 'M3 0' is probably interpreted as a program end 'M30':

Please Log in or Create an account to join the conversation.

11 months 2 weeks ago #338286 by davmer42

Replied by davmer42 on topic issues with cnc 2.9

actually I found out it was caused by a tool being called that doesn't exist, so it cancelled the file load

The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

Time to create page: 0.272 seconds