probe screen in gmoccapy ?

hello guys,

i have installed probe screen v2 on my linux cnc 2.8pre on debian 9.
now i have only one problem.
when i get on the probe screen icon i go to the probescreen
then i push on an action button like inner diameter messuring i directle go to mdi screen.
i have to push the probe screen button a second time to calibrate the z axis und thats shit.

i have a Picture in attachments like i want mine

is this a image where we need to find the differents

You need to uncheck auto Zero
then it keeps the screen up

I do not know the internal of probe screen, but gmoccapy seems to react correct.

Gmoccapy listen on the linuxcnc state, if probe screen fires an MDI command, gmoccapy will change to that mode, beeing MDI.

I do handle such cases, i do not want the GUI to flip state changes arround by internal gmoccapy ways, that are not accessible from outside gmoccapy in an easy way.

As far as i see, in the screenshots auto zero is unchecked.

Norbert

I found the Problem already.
my Problem was probescreen was an extra window!
now ist only a Tab like i want it.

Thanks for Reply

What did you change to make that work please?
Mark

EMBED_TAB_NAME=Probe Screen
#EMBED_TAB_LOCATION = ntb_preview
EMBED_TAB_LOCATION = ntb_user_tabs