Gmoccapy Macros

Hi guys, I'm using Gmoccapy interface for lathe and I'm trying to put macro cycles, but I'm not getting it.  I even managed to put more images corresponding to each cycle does not appear.  
Someone could give a light.  

Tks

Could you tell us what you have done to get macros?
Could you tell us what macros?
Could you post your config files?

hello mmorley,
I put the files inside the machine's own folder, if I'm not mistaken there were six, facing, boring, chamfer, radius...etc.
I changed the Falcon.ini file: "EMBED_TAB_NAME=Cycles", "EMBED_TAB_LOCATION = ntb_preview", "EMBED_TAB_COMMAND=halcmd loadusr -Wn gladevcp gladevcp -c gladevcp -u lathehandler.py -x {XID} lathemacro.

You need to add the macro names to your ini file and pass the parameters there as per the gmoccappy docs
linuxcnc.org/docs/2.8/html/gui/gmoccapy.html#gmoccapy:macros

I think he is talking of Andy's lathe macros, which are set up differently. (they use their own tab)

do the tab apear in gmoccapy?
Start LinuxCNC from terminal and watch the output, you may dee an error when embedding the tab.

Norbert