Probe from Vers.by

More
02 Jun 2018 09:46 #111451 by Mike_Eitel
F.Y.I.
Just received my new probe.
vers.by/en/touch-probes/13-wireless-touch-probe-vers-wl.html

Very nice made wireless probe for realy fair money.
My machine is still in revision state, so can not prove anounced data.
But small bench test looked promising.

Had good comunication and acceptable delivery time.

Attachment not found



P.S.
I have no advantage of this mail, but like to support such producers.
The following user(s) said Thank You: verser

Please Log in or Create an account to join the conversation.

More
29 Jun 2018 22:19 #113112 by pippin88
Replied by pippin88 on topic Probe from Vers.by
I am very interested in this probe.

Can you show some photos?

Please Log in or Create an account to join the conversation.

More
30 Jun 2018 15:41 - 30 Jun 2018 15:42 #113134 by Mike_Eitel
Replied by Mike_Eitel on topic Probe from Vers.by
To see more details use the link in link above.
Here a photo



As it was delievered.
Mike
Attachments:
Last edit: 30 Jun 2018 15:42 by Mike_Eitel. Reason: Double image

Please Log in or Create an account to join the conversation.

More
17 Oct 2018 10:00 #118936 by pippin88
Replied by pippin88 on topic Probe from Vers.by
Mike,

How is the probe going? Are you happy with it?

Please Log in or Create an account to join the conversation.

More
28 Dec 2018 00:19 #122988 by 3D-Master
Replied by 3D-Master on topic Probe from Vers.by
i am also thinking about buying this Wireless probe so are you happy? were/are there any problems?

Please Log in or Create an account to join the conversation.

More
28 Dec 2018 14:09 - 28 Dec 2018 14:11 #123018 by Mike_Eitel
Replied by Mike_Eitel on topic Probe from Vers.by
My machine is still semifinished.
So I only touch until now by hand. That can be quite fare away from the receiver.

I'm on version 2, saw now there is 3. The difference is probably the receiver. The newer seams better adjustable to NO/NC and sourcing / sinking. And more important 24V connectable! Not big problems for me....

The only thing, but that can also be seen from two sides: If the probe is off it is signalized as triggered.

I judge it as a good buy.
Mike

P. S.
SORRY Pippin88.
Did forget to answer.. Yes I would buy again
Last edit: 28 Dec 2018 14:11 by Mike_Eitel.
The following user(s) said Thank You: 3D-Master

Please Log in or Create an account to join the conversation.

More
03 Dec 2019 23:05 #151914 by mjoconr
Replied by mjoconr on topic Probe from Vers.by
Did you ever get to use the probe ?

Please Log in or Create an account to join the conversation.

More
05 Dec 2019 08:20 #152050 by Mike_Eitel
Replied by Mike_Eitel on topic Probe from Vers.by
Yes. Works like a charm.
Only: Don't forget to switch on off ;-)

Please Log in or Create an account to join the conversation.

More
05 Dec 2019 14:26 #152068 by andypugh
Replied by andypugh on topic Probe from Vers.by
For a wireless probe it might make sense for it to have a centrifugal switch.
(Or, more simply, a plunger that is depressed when it is in the spindle)

Please Log in or Create an account to join the conversation.

More
05 Dec 2019 21:54 #152118 by 3D-Master
Replied by 3D-Master on topic Probe from Vers.by
i heard they want to release a wireless touch probe with a rechargeable battery, so no need to open the probe just to change the battery.

Please Log in or Create an account to join the conversation.

Time to create page: 0.104 seconds
Powered by Kunena Forum