G code Generators

More
27 Mar 2009 16:06 - 26 Jun 2012 23:48 #14 by BigJohnT
G code Generators was created by BigJohnT
The Wiki has a large gathering of G code generators...

wiki.linuxcnc.org/cgi-bin/wiki.pl?Simple...NC_G-Code_Generators


John
Last edit: 26 Jun 2012 23:48 by BigJohnT.
The following user(s) said Thank You: Bullet_Head, Dinuka_Shehan

Please Log in or Create an account to join the conversation.

More
09 Jun 2014 17:41 #47802 by Bloumielies
Replied by Bloumielies on topic G code Generators
Hi John

Could you possibly assist me. I am trying to get the arc buddy 1.3 to assist me to generate g-code for my cnc machine. As soon as I enter all the parameters I need on the GUI and try to exit and send it to Axis, the transfer of G-code does not happen. I have tried the others like Face and drill and they all work. After a while of having the time circle (progress circle running) I stop the GUI and get the following message "File ended with no percent sign or program end".

I see that in the website was two link for arc buddy and I cannot get any of the two to work.

I am a beginner at this. Is there maybe something that I might be missing or is there maybe another version available?

Thank you

Please Log in or Create an account to join the conversation.

More
09 Jun 2014 18:25 #47804 by BigJohnT
Replied by BigJohnT on topic G code Generators
Just to be sure you opened arcbuddy.py from Axis?

I'll check it out and see what it is doing.

JT
The following user(s) said Thank You: Bloumielies

Please Log in or Create an account to join the conversation.

More
09 Jun 2014 18:32 #47805 by Bloumielies
Replied by Bloumielies on topic G code Generators
Hi John

Yes, precisely the way that is explained on the website. I also found now that the engrave.py does the same.

Thank you

Please Log in or Create an account to join the conversation.

More
09 Jun 2014 18:34 #47806 by BigJohnT
Replied by BigJohnT on topic G code Generators
For starters there is a typo in the WriteToAxis code... and it only outputs the arc code so it will not be a complete program ie there is no M2 or starting point.

Be Back in a Bit.

JT

Please Log in or Create an account to join the conversation.

More
09 Jun 2014 19:09 #47807 by BigJohnT
Replied by BigJohnT on topic G code Generators
Ok, download 1.4. I've fixed the send to Axis button to be a tad useful however there is no Z...

JT

Please Log in or Create an account to join the conversation.

More
09 Jun 2014 19:15 #47808 by BigJohnT
Replied by BigJohnT on topic G code Generators

Hi John

Yes, precisely the way that is explained on the website. I also found now that the engrave.py does the same.

Thank you


The engraving ones are Lawrence's work... what does engrave-11.py do?

JT

Please Log in or Create an account to join the conversation.

More
10 Jun 2014 13:28 #47833 by Bloumielies
Replied by Bloumielies on topic G code Generators
Hi John

Thank you very much, it seems to work now 100%. Appreciate it.

Maybe just a remark. I see the cutter does not clear the arc when finished with the cutting. Suggestion if I could maybe to just clear the work piece after cutting.

I will test the others now and get back if I see some other errors.

Thank you

Please Log in or Create an account to join the conversation.

More
10 Jun 2014 13:34 #47834 by Bloumielies
Replied by Bloumielies on topic G code Generators
Hi John

The following gives me the same error as before on the arc buddy about the no percent sign and program end:
1. boltcircle2
2. counterbore
3. drill
4. engrave-11

The ones not mentioned works correct.

Kind regards

Please Log in or Create an account to join the conversation.

More
10 Jun 2014 18:11 #47845 by BigJohnT
Replied by BigJohnT on topic G code Generators

Hi John

Thank you very much, it seems to work now 100%. Appreciate it.

Maybe just a remark. I see the cutter does not clear the arc when finished with the cutting. Suggestion if I could maybe to just clear the work piece after cutting.

I will test the others now and get back if I see some other errors.

Thank you


Yes Arc Buddy was never intended to actually generate a working program only to generate the arc that you would cut and paste into your G code.

JT

Please Log in or Create an account to join the conversation.

Time to create page: 0.104 seconds
Powered by Kunena Forum