Sharing G71 remap

Barry?

You wanted to try my stuff? First post in this thread has four attached files. I don't remember how to remap but it is in the docs and maybe someone on the forum can help. Read the first post and use those files.

I didn't see those files. Thanks for pointing those out.
I shall have a look at them and see if I can find out what to do with them.
Thanks..

BTW, who is 'Barry' ?

Barry is someone looking to try my version of the g71 remap. I thought it was him showing up. Apparently you are not Barry. Nice to meet you. Note that the four files in this post is my g71 remap. So don't be confused by other posts which may refer to another version of g71 remap. Note that my g71 has some additional features, be sure to try them out too.

With "my version" I don't mean a modified version. I programmed this from scratch.

rider-83 wrote:

github.com/LinuxCNC/linuxcnc/tree/andypu...configs/sim/axis/g71

404 page doesn't exist?
 

It seems that I deleted it when purging my redundant branches. 

I probably didn't mean to. 
 

I've created a folder called 'python' at the location below:

/home/boxford/linuxcnc/python

I have copied into this 'python' folder the files:
remap.py
stdglue.py
toplevel.py
v3.py

My .ini file now contains:

[PYTHON]
TOPLEVEL = /home/boxford/linuxcnc/python/toplevel.py
PATH_APPEND = /home/boxford/linuxcnc/python
[RS274NGC]
REMAP=G71 modalgroup=1 argspec=PDrikjlfst python=g71

But it's not working. LCNC starts up correctly with no errors, but G71 is not yet recognised.