Forum Menu

mb2hal in LinuxCNC 2.9 No function Code 01

More
3 years 1 month ago #281951 by JPL
Replied by JPL on topic mb2hal in LinuxCNC 2.9 No function Code 01
I think you need to add  VERSION=1.1, according to 2.9 doc:

#OPTIONAL: Set to 1.1 to enable the new functions:
# - fnct_01_read_coils
# - fnct_05_write_single_coil
# - changed pin names (see linuxcnc.org/docs/2.9/html/drivers/mb2hal.html#_pins ).
VERSION=1.1



 

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #281952 by JPL
Replied by JPL on topic mb2hal in LinuxCNC 2.9 No function Code 01
Yeah, this: linuxcnc.org/docs/2.9/html/drivers/mb2hal.html#_pins
Confirms that you must set VERSION = 1.1 to have the new fnct_01 and fnct_05

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #281968 by deroj
Replied by deroj on topic mb2hal in LinuxCNC 2.9 No function Code 01
YES!!!
Thank you very much.
That was the hint I didn't see

Please Log in or Create an account to join the conversation.

Time to create page: 0.206 seconds
Powered by Kunena Forum