update Firmware of 7i73, through 7i74 and 7i76e

newbynobi
Topic Author
Offline
Platinum Member

10 years 3 months ago #78223 by newbynobi

Replied by newbynobi on topic update Firmware of 7i73, through 7i74 and 7i76e

Thanks PCW,

matrix_kb did the trick ;-)

I was just watching the keycode in halshow, and that one didn't change.
After I added

Code:

loadrt matrix_kb config=4x8
addf matrix_kb.0 servo-thread
net keycode matrix_kb.0.keycode <= hm2_7i76e.0.7i73.1.0.keycode

to my hal, I was able to watch the pin changing the state.

Now I only have to find out, why I am not able to load the lcd component, but that is on another thread.

Thanks Norbert

Please Log in or Create an account to join the conversation.

PCW
Offline
Moderator

10 years 3 months ago #78235 by PCW

Replied by PCW on topic update Firmware of 7i73, through 7i74 and 7i76e

Yeah, I had forgotten that the keycodes (other then the idle code) are only present for 1 servo period
so pretty hard to catch with hal watch

Please Log in or Create an account to join the conversation.

Moderators: PCW, jmelson

Time to create page: 0.041 seconds