7i80 kernel

Thanks Fairngs,
I'm using debian 9 rt-preempt, but the problem is that I can not in any way
to change ip.
later I try with a friend who has already configured a 7i80 with a i3 Nuc
then I'll let you know
regards
Mauro

When you say "change ip" do you mean change the 7I80s IP address?

The 7I80 has 2 selectable (via on card jumpers) IP addresses:

1. A fixed 192.168.1.121 address
2. A EEPROM address that defaults to 10.10.10.10 but can be changed to anything

The EEPROM address can be changed with mesaflash

it was just mesaflash that did not work .. now i have a i3 nuc and it works perfectly
with default address 192.168.1.121
I just do not know what bitfile to use for 2 7i40 and 7i37.
thank you
Mauro

I'll explain..
I would just like to know the bitfiles that are in the 7i80 folder that features have.
stepgen pwmgen encoder etc ..
I did not find descriptions.
thank you
Mauro

The bitfile for 1 to 4 7I40 and a 7I37 is 7i80hd_25_svst8_4.bit or 7i80hd_16_svst8_4.bit

But I have a 7i80db-16 as I said, but it's not a problem if it's about changing wires. the important thing that can go.
but in the 7i80 folder there are no files for this ..
regards
Mauro