PKTUARTTest error

Hi,

I flashed bitfile PKTUARTTest_72 that was made from PIN_PKTUARTTest_72.vhd. But when i try check firmware by command "readhmid" the terminal show me this :

How to fix it? i'm using xilinx 14.7 ISE.I took firmware src from
github.com/LinuxCNC/hostmot2-firmware/bl...N_PktUARTTest_72.vhd

I think you need a 2.8 version of linuxCNC for pktuart to be detected. (And I am not 100% sure that Mesaflash understands pktUART anyway, it has a separate development cycle to LinuxCNC.

Try

addendum: 6100 and 6500 are UART base addresses, so I think that the firmware is probably good. It's a Mesaflash version problem.

i'm using linuxcnc 2.8 on ubuntu 16.4.

loadrt hm2_pci give me this bug:


I can flash another firmware normally. Here i tried another firmware that has pktuart, it's name PIN_7I76x1_PktD_51, But there is only pktuart's pins show unkown.

Mesaflash show:


i also try change: InstStride1: integer := 64 to 16 but nothing change.

It looks like there is a problem with the first firmware.

Can you try the HAL commands with the second firmware?

i think pktuart has problem because in 2nd firmware every pins are normal except pktuart pin

halcmd command of 2nd firmware show: