7i92 7i92M 7i92H

Sorry if this has been addressed before, I searched the forum and couldn't see an answer.

What are the differences between the 3 boards.

I'm going to migrate from my BBB & MK to a x86 Platform & Linuxcnc (support is much better via the forum) and really would like to know which board to get...I have a habit of, if I just jump in, getting the wrong thing for what I need.

Cheers
Rob

Just a stab in the dark here but I think it refers to the header configuration. Standard = female DB25, H = headers only, M = male DB25.

I've got a surplus unopened 7i76e here in Brissy if it is of interest Rob.

Yes, the only difference between the versions is the primary I/O connector.

This is not terribly important if you are going to use a cable to connect the 7I92(X) to a breakout board/drive,
but if you want to use a direct connection to a Mesa breakout (Which have female DB25s) the 7I92M is needed
and for some common low cost parallel port breakout boards (which have male DB25s), the original 7I92
(with a female DB25) is needed.

Cheers guys thanks for the replies, very much appreciated.

Hi Rod.

I would be interested in your 7i76e if it is available. Im in Vic.

Cheers

Matt

Hi guys, I replied to emails from both of you but have not received a reply from either of you. I'm away until the weekend now.