Connecting quadrature encoder to spindle on Mesa 7i76e

Hi, I am in a very similar situation with single ended pnp 24V inductive encoder.
@PCW do you have any hint where to find or how to build such a voltage divider

I mean in theory I know how but is there something special to know for this specific case

I would use a 2 resistor pair per A/B/IDX:

24V PNP encoder signal --> 1K 1W --> 5V encoder input --> 240 Ohm 1/4W --> GND

I will try this, thx

I found a 240ohm 600mW should work.