Forum Menu

Mill Tapping G code Generator

More
13 years 2 months ago - 13 years 2 months ago #37630 by BigJohnT
Replied by BigJohnT on topic Mill Tapping G code Generator
0.3.5 fixed a typo and an omission that caused an error if you left the peck depth field blank.
Last edit: 13 years 2 months ago by BigJohnT.

Please Log in or Create an account to join the conversation.

More
13 years 2 months ago - 13 years 2 months ago #37657 by BigJohnT
Replied by BigJohnT on topic Mill Tapping G code Generator
Rob converted the metric dictionary last night so I'm adding metric fine and coarse to the generator. Oh and I'm adding G82 spot drill too.

JT
Last edit: 13 years 2 months ago by BigJohnT.
The following user(s) said Thank You: AlexN

Please Log in or Create an account to join the conversation.

More
11 years 9 months ago - 11 years 9 months ago #54714 by BigJohnT
Replied by BigJohnT on topic Mill Tapping G code Generator
Fixed a strange one that made peck drilling fail to generate.

JT
Last edit: 11 years 9 months ago by BigJohnT.
The following user(s) said Thank You: library

Please Log in or Create an account to join the conversation.

More
11 years 7 months ago #56691 by library
Replied by library on topic Mill Tapping G code Generator
This was really helpful for my project today. Thanks for coding it up!

Please Log in or Create an account to join the conversation.

More
2 years 1 month ago #309254 by casilio55
Replied by casilio55 on topic Mill Tapping G code Generator
Greetings, I like your tapping G code generator, we are looking at purchasing a cnc machine to do electrical panel backplates and I am looking at your G code generator. a couple of questions:
does it only run in linux, and if so, what linux software do you use, and also can you run linux on a virtual machine to make it work, and once completed, can you download into the cnc machine. Thank you for assistance - Bruce

Please Log in or Create an account to join the conversation.

Time to create page: 0.269 seconds
Powered by Kunena Forum