Ah - then get 'probe tripped during homing motion'. That seems a reasonable alert. I can admit defeat at this point and regroup with some hardware changes.
Thank you for your assistance. It'd still be great is AXIS GUI had two buttons - 'home axis' and 'home all axis' but hey.
Cliffnz wrote: Ah - then get 'probe tripped during homing motion'. That seems a reasonable alert. I can admit defeat at this point and regroup with some hardware changes.
Or you could mask the probe input in HAL until the axis is homed.
Code:
loadrt and2 count=1
...
addf and2.0 servo-thread
...
net home-z axis.2.home-sw-in and2.0.in0
net z-homed axis.2.homed and2.0.in1
net probe and2.0.out motion.probe-input
but hey.