Forum Menu

Machine won't jog or run a program

More
8 years 11 months ago #101483 by cintsa cnc
Replied by cintsa cnc on topic Machine won't jog or run a program
No reaction to T1 M6
is there any way to repair AXIS without reloading the whole Debian package?

Please Log in or Create an account to join the conversation.

More
8 years 11 months ago #101491 by andypugh
Replied by andypugh on topic Machine won't jog or run a program
Check the HAL file for iocontrol.0.tool-change and iocontrol.0.tool-prepare.
Wshere do they link to?

Please Log in or Create an account to join the conversation.

More
8 years 11 months ago #101494 by cintsa cnc
Replied by cintsa cnc on topic Machine won't jog or run a program
Will only get back to machine early tomorrow morning your time. Will reply soonest

Please Log in or Create an account to join the conversation.

More
8 years 11 months ago #101642 by cintsa cnc
Replied by cintsa cnc on topic Machine won't jog or run a program
I have been without internet for a few days. I finally re loaded the Linux package and now everything appears to be working fine. Thanks for your assistance and time.

Please Log in or Create an account to join the conversation.

Time to create page: 0.235 seconds
Powered by Kunena Forum