New Project with Mesa 7I96 and THCAD-05

ohmic3 does not seem to be a part of LinuxCNC

Were you supposed to have downloaded it from somewhere?

acourtjester wrote: I also have problems getting the key in the buildbot routing Phillc posted

I am getting the same, it seem the keyserver has been taken offline. sks-keyservers.net

Edit2: This is probably the more correct one:
This one seems to be ok for the moment:
Edit1: This one looks ok as well:

PCW wrote: ohmic3 does not seem to be a part of LinuxCNC

Were you supposed to have downloaded it from somewhere?

needs to be downloaded from this forum.

thanks Phillc
the location with the EU did load a key, but I now have a problem turning on (Estop/power) any new Pncconf made with QTPlasmaC. Other GUI seem to work ok, but some function tabs are missing??? I did a complete reload of the LINUXCNC with upgrades to 2.9. I am very frustrated with LINUXCNC, there are very nice features in the GUI for QTPlasmaC. member had helped but sometime we don't communicate very well I asked where the ohmic3 but no answer. A simple zip file with it in would help. Sorry to complain but I have invested time and money, and I am getting nowhere.

acourtjester wrote: I asked where the ohmic3 but no answer.

You can find it attached to this post:
forum.linuxcnc.org/plasmac/38848-hyperse...ons?start=210#175839

Thanks for the link, Ok to me that looks like a text doc, how do you compile it in Linux??
It is shown twice in that post one that takes you to github but both look like a text doc. When I save it is shows as a PDF.