Yaskawa servo options

Sorry, I got busy and rather dropped the ball on this one.

dm17ry wrote: linuxcnc component description: yurtaev.com/nyx24.html
...
"$ sudo apt install -t stretch python-gtksourceview2 # this package is missing in buster"

It is backported via LinuxCNC. If the LinuxCNC deb archive is configured then it should install from there.

2.8 fork with my patches: github.com/yur7aev/linuxcnc/tree/nyx2.8
sample linuxcnc configs: github.com/yur7aev/linuxcnc/tree/nyx2.8/configs/nyx

I am still fuzzy on whether your board and driver code will work on an otherwise unmodified LinuxCNC.

dm17ry wrote:

linuxcnc component description: yurtaev.com/nyx24.html
2.8 fork with my patches: github.com/yur7aev/linuxcnc/tree/nyx2.8
sample linuxcnc configs: github.com/yur7aev/linuxcnc/tree/nyx2.8/configs/nyx

I have a sgd7w servo drive and mechatrolink III control card. It’s possible to communicate with your comp over ethernet?

   

How do i buy this card an how much does it cost?
yurtaev.com/yssc3p.html

I see an email half way down the front page yurtaev.com/ with instructions to contact that email for purchasing cards.