XHC-WHB04B-6 - Handwheel doesn´t respond

5 years 7 months ago #201096 by Cadic

Replied by Cadic on topic XHC-WHB04B-6 - Handwheel doesn´t respond

And please how can I fix that? Im total Linux noob, so I dont know how to create this signal.

Thanks

Please Log in or Create an account to join the conversation.

5 years 7 months ago #201428 by Cadic

Replied by Cadic on topic XHC-WHB04B-6 - Handwheel doesn´t respond

Please, can anyone advise? I can't solve it myself.

Please Log in or Create an account to join the conversation.

5 years 7 months ago #201464 by andypugh

Replied by andypugh on topic XHC-WHB04B-6 - Handwheel doesn´t respond

Cadic wrote: I have this error on 95 percent of lines. - ./xhc_whb.hal:x: Pin halui.xxx.xxx does not exist

It sounds like you are not loading halui.

linuxcnc.org/docs/2.8/html/config/ini-config.html#_hal_section

At the bottom of the [HAL] section is the required stanza that needs to be in your iNI file, and a link to further docs.

Code:

[HAL]
HALUI = halui

Please Log in or Create an account to join the conversation.

5 years 7 months ago #201469 by Cadic

Replied by Cadic on topic XHC-WHB04B-6 - Handwheel doesn´t respond

Oh my god, it work!

Thank you all very much for your help. You're amazing!

Please Log in or Create an account to join the conversation.

4 years 1 month ago - 4 years 1 month ago #251649 by xenon-alien

Replied by xenon-alien on topic XHC-WHB04B-6 - Handwheel doesn´t respond

Hello!
I received one too!
Anyone knows, how to change the backlight brightness?

Last edit: 4 years 1 month ago by xenon-alien.

Please Log in or Create an account to join the conversation.

Time to create page: 0.454 seconds