Testing without hardware
07 Oct 2022 06:23 #253647
by eslavko
Testing without hardware was created by eslavko
Hello...
Is there a way to test linuxCNC interface without (mesa ethernet) hardware card.
I need to make pretty custom VCP/GUI but I don't have mesa hardware in office.
Linuxcnc fail at boot as the card is not found. Is there some software simulator for mesa ethernet cards?
Is there a way to test linuxCNC interface without (mesa ethernet) hardware card.
I need to make pretty custom VCP/GUI but I don't have mesa hardware in office.
Linuxcnc fail at boot as the card is not found. Is there some software simulator for mesa ethernet cards?
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 17771
- Thank you received: 5906
07 Oct 2022 08:39 #253656
by tommylight
Replied by tommylight on topic Testing without hardware
No double posting.
There is another thread with the same topic, it makes it really hard to follow what has been answered.
Thank you.
There is another thread with the same topic, it makes it really hard to follow what has been answered.
Thank you.
Please Log in or Create an account to join the conversation.
07 Oct 2022 08:51 - 07 Oct 2022 09:07 #253657
by eslavko
Replied by eslavko on topic Testing without hardware
Continued on
thread
thread
Last edit: 07 Oct 2022 09:07 by eslavko.
Please Log in or Create an account to join the conversation.
Time to create page: 0.127 seconds