Communication solution on my own CNC Machine

Yayyy i did sleep ... for about 3.5 hours!
Links:
Litex:
forum.linuxcnc.org/27-driver-boards/4773...port-to-linsn-rv901t
forum.linuxcnc.org/27-driver-boards/5038...or-5a-75b-and-5a-75e
NVEM:
forum.linuxcnc.org/18-computer/44828-rem...ernet-nvem-cnc-board
Remora:
forum.linuxcnc.org/18-computer/42276-rem...rocontroller-via-spi
ESP32:
forum.linuxcnc.org/18-computer/51816-esp...en-usb-plug-and-play
forum.linuxcnc.org/18-computer/42414-lin...ethernet-using-esp32
RIO/FPGA:
forum.linuxcnc.org/18-computer/49142-lin...d-on-fpga-ice40-ecp5
And a long list of SBC's that might or might not work with LinuxCNC:
forum.linuxcnc.org/18-computer/46077-pot...ngle-board-computers

To use a music analogy. Each band member is an axis

Realtime:


Non Realtime:

Roll your own Mesa type card
forum.linuxcnc.org/show-your-stuff/51142...tan-6-fpga-card-9d60

srknyxl wrote:

I want to make permanent magnet ac servo motors myself, in addition to the body parts. Even though the power density in terms of volume is not as much as industrial servos, I think it can be a good start.

I think that you might be disappointed with the performance of your own motors. One issue is getting a suitably small air gap, as you (probably) don't want to be machining the magnets.

I have built a servo motor, but it wasn't really suitable for the task I wanted it for:

photos.app.goo.gl/uYcpsh4t5SxmpCiP8

> My Pal Foot Foot

holy shit that is funny. that drum opening is amazing.

andypugh wrote:

srknyxl wrote:

I want to make permanent magnet ac servo motors myself, in addition to the body parts. Even though the power density in terms of volume is not as much as industrial servos, I think it can be a good start.

I think that you might be disappointed with the performance of your own motors. One issue is getting a suitably small air gap, as you (probably) don't want to be machining the magnets.

I have built a servo motor, but it wasn't really suitable for the task I wanted it for:

photos.app.goo.gl/uYcpsh4t5SxmpCiP8

jesus andy, not for lack of being impressed, but they have these things called frameless motors...