Locations of LinuxCNC

Where can I download them from?

JT

At the moment these links are available:

(tested on Debian Bookworm)

linuxcnc-uspace_2.10.0~pre0_arm64.deb

linuxcnc-uspace-dev_2.10.0~pre0_arm64.deb 

(tested on Debian Bullseye)

linuxcnc-uspace_2.9.0~pre0_arm64.deb

linuxcnc-uspace-dev_2.9.0~pre0_arm64.deb

Tomorrow I will upload those for 2.8.4 (tested on buster)

Both dev debs are only 246kB in size and I expected at least 1MB or more in size so I think something is wrong with them.

Jt

JT wrote:

Both dev debs are only 246kB in size and I expected at least 1MB or more in size so I think something is wrong with them.

Jt

Strange, now I check again.

Perhaps it is due to the fact that the compilation does not include the documentation?

The commands I run are:

debian/configure no-docs
dpkg-checkbuilddeps
debuild -uc -us

However, the debs with the various languages are the same for both the armhf and arm64 version

I just checked the armf 32bit dev and it's also 268kB so I guess the amd is bigger dunno. Anyway they are uploaded now.

JT

JT wrote:

I just checked the armf 32bit dev and it's also 268kB so I guess the amd is bigger dunno. Anyway they are uploaded now.

JT

In any case you can also check the .deb file using a program like 7-Zip ( www.7-zip.org/ ) with which you can see the content.