Flex GUI version 1.0.0

I'm planning on using Flex for the interface on an industrial router that I'm converting.  I have to deal with the 100+ I/Os first though image missing /media/kunena/emoticons/shocked.png

kworm wrote:

I'm planning on using Flex for the interface on an industrial router that I'm converting.  I have to deal with the 100+ I/Os first though image missing /media/kunena/emoticons/shocked.png
 

That's a lot of I/O.

Let me know if you need anything or anything in the docs is not clear.

JT

Here's a short video showing how probing is setup and used  and the example is in the Flex GUI examples.


The documents page for probe are here .

JT

Here's a video showing the safety features of Flex GUI when probing is enabled.


JT

JT wrote:

Here's a video showing the safety features of Flex GUI when probing is enabled.

JT
 

I haven't played with Flex since you first posted links some time ago, but I think I'm going to have a go at it soon.

Regarding the probe safety... is this set of features adjustable?  I have a wireless probe and somewhere on the never-ending list of things to do is use M19 to approach the target with the probe in the same orientation every time.

spumco wrote:

JT wrote:

Here's a video showing the safety features of Flex GUI when probing is enabled.

JT
 

I haven't played with Flex since you first posted links some time ago, but I think I'm going to have a go at it soon.

Regarding the probe safety... is this set of features adjustable?  I have a wireless probe and somewhere on the never-ending list of things to do is use M19 to approach the target with the probe in the same orientation every time.
 

Absolutely, all you have to do to have a MDI push button that sends a M19 available during a probe operation is to simply name it probe_some_name. Any widget that starts with probe_ is disabled when not in the probe mode and enabled when probe mode is on.
gnipsel.com/linuxcnc/flexgui/probe.html

JT