How to connect f-error to pyvcp

Artur_1617
Topic Author
Offline
Elite Member

3 years 9 months ago #261337 by Artur_1617

How to connect f-error to pyvcp was created by Artur_1617

I have problem showing f-error in pyvcp.
Now I make xml file with f-error and this showing correctly but dont change anything if moving axis.
In xml halpin one pin is named x-f-error
In custom.postgui.hal try to connect it with net joint.0.f-error => x-f-error but dont working ( joint.0.f-error exist and I can watching him in halmeter)
I miss something else for work..
Think I must to write something in hall Halui..

Please Log in or Create an account to join the conversation.

cmorley
Offline
Moderator

3 years 9 months ago #261404 by cmorley

Replied by cmorley on topic How to connect f-error to pyvcp

please post your confuration files.

Please Log in or Create an account to join the conversation.

Artur_1617
Topic Author
Offline
Elite Member

3 years 9 months ago #261477 by Artur_1617

Replied by Artur_1617 on topic How to connect f-error to pyvcp

File Attachment:

File Name: custom_pos...1-10.hal
File Size:629 B

File Attachment:

File Name: pyvcp-pane...1-10.xml
File Size:2.09 KB

File Attachment:

File Name: tokarka_20...1-10.hal
File Size:10.89 KB

File Attachment:

File Name: tokarka_20...1-10.ini
File Size:4.81 KB

Please Log in or Create an account to join the conversation.

Artur_1617
Topic Author
Offline
Elite Member

3 years 9 months ago #261778 by Artur_1617

Replied by Artur_1617 on topic How to connect f-error to pyvcp

cmorley wrote:
please post your confuration files.
?

Please Log in or Create an account to join the conversation.

MaHa
Offline
Platinum Member

3 years 9 months ago #261849 by MaHa

Replied by MaHa on topic How to connect f-error to pyvcp

I had a few minutes time, to look at this.

in postgui hal:

Code:

net x-err  joint.0.f-error  pyvcp.x-error

in xml use e for format

Code:

<number>
    <format>" 4.6e"</format>
    <halpin>"x-error"</halpin>
</number>

The following user(s) said Thank You: tommylight, Artur_1617

Please Log in or Create an account to join the conversation.

Artur_1617
Topic Author
Offline
Elite Member

3 years 9 months ago #262383 by Artur_1617

Replied by Artur_1617 on topic How to connect f-error to pyvcp

Working but dont show correctly.
When in halmeter show for example 0.003000 in pyvcp show 1.000000-0e

Please Log in or Create an account to join the conversation.

phillc54
Offline
Platinum Member

3 years 9 months ago #262384 by phillc54

Replied by phillc54 on topic How to connect f-error to pyvcp

Try 4.6f for the format.

Please Log in or Create an account to join the conversation.

Time to create page: 0.365 seconds