SolidCAM 2021 circular pocket not generated

DerKlotz
Topic Author
Offline
Premium Member

10 months 1 week ago #340388 by DerKlotz

SolidCAM 2021 circular pocket not generated was created by DerKlotz

Hello,
i just started with SolidCAM and try my first job -> attached photos..
All working toolpathes are blackish and one not working toolpath is blueish. Here i want a 6.05mm hole/4mm deep. Tool should be a 6mm end mill.
Tried many things but still don´t work.

Please help

Please Log in or Create an account to join the conversation.

MaHa
Offline
Platinum Member

10 months 1 week ago #340389 by MaHa

Replied by MaHa on topic SolidCAM 2021 circular pocket not generated

It's the xy allowance 0.25mm , using a 6mm tool machining 6.05

The following user(s) said Thank You: DerKlotz

Please Log in or Create an account to join the conversation.

DerKlotz
Topic Author
Offline
Premium Member

10 months 1 week ago #340390 by DerKlotz

Replied by DerKlotz on topic SolidCAM 2021 circular pocket not generated

Thank you very much

Please Log in or Create an account to join the conversation.

Time to create page: 0.054 seconds