HalView

  • meister
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
5 months 3 weeks ago #346344 by meister
HalView was created by meister
little tool to see the hal-values in realtime:

The following user(s) said Thank You: tommylight, HalaszAttila, andrax, Surmetall, onceloved

Please Log in or Create an account to join the conversation.

  • meister
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
5 months 2 weeks ago #346393 by meister
Replied by meister on topic HalView
some updates, the gui is interactive now, you can zoom and move all node for a better view.
The original diagram is generated automatically from the INI/HAL file, and the layout is created using Graphviz.

The following user(s) said Thank You: andrax, Surmetall

Please Log in or Create an account to join the conversation.

  • meister
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
5 months 2 weeks ago #346394 by meister
Replied by meister on topic HalView
github.com/multigcs/halviewer
The following user(s) said Thank You: pommen

Please Log in or Create an account to join the conversation.

More
5 months 2 weeks ago #346396 by andrax
Replied by andrax on topic HalView
Cool
The following user(s) said Thank You: meister

Please Log in or Create an account to join the conversation.

  • meister
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
5 months 2 weeks ago #346410 by meister
Replied by meister on topic HalView
adding line-charts:
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

  • meister
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
5 months 5 days ago #346699 by meister
Replied by meister on topic HalView
I've added a few more filter and sort functions



 
The following user(s) said Thank You: RotarySMP, tommylight, maxi177, HalaszAttila, Surmetall

Please Log in or Create an account to join the conversation.

  • meister
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
5 months 4 days ago #346723 by meister
Replied by meister on topic HalView
adding 'setp' support

 

Please Log in or Create an account to join the conversation.

More
5 months 4 days ago #346749 by HansU
Replied by HansU on topic HalView
Really nice and very useful debug tool. Thanks for sharing! I think this should be shipped with linuxcnc. What do you think?

Only a little note to the selection behaviour - when I click on several components after each other, and when I hold down on the last one and drag, all the previous clicked components are in the selection and are moved together. I think it would be more intuitive to do that with Ctrl click.

Please Log in or Create an account to join the conversation.

More
5 months 2 days ago #346789 by snowgoer540
Replied by snowgoer540 on topic HalView
Nice work, excited to test it out!

I am reminded of Excessive Overkill's youtube channel (around 18:39):  


 
The following user(s) said Thank You: tommylight, meister

Please Log in or Create an account to join the conversation.

  • meister
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
5 months 1 day ago #346835 by meister
Replied by meister on topic HalView
but my tool is only for viewing, not really for editing
The following user(s) said Thank You: snowgoer540

Please Log in or Create an account to join the conversation.

Time to create page: 0.222 seconds
Powered by Kunena Forum