Gladevcp pin does not exsist

mmt
Topic Author
Offline
Premium Member

10 months 4 weeks ago #339741 by mmt

Gladevcp pin does not exsist was created by mmt

Been quite a while since I've edited my linuxcnc v2.9.x Not sure what I am doing wrong here.

Help is appreciated

Please Log in or Create an account to join the conversation.

Aciera
Offline
Administrator

10 months 4 weeks ago #339743 by Aciera

Replied by Aciera on topic Gladevcp pin does not exsist

Looks like you got the pin name wrong. Try removing the 'gladevcp.' at the beginning.

Please Log in or Create an account to join the conversation.

mmt
Topic Author
Offline
Premium Member

10 months 3 weeks ago #339874 by mmt

Replied by mmt on topic Gladevcp pin does not exsist

That worked but ultimately what I'm trying to do is add that line to my custom_postgui.hal file.
My glade file works good but there is one LED that I can't get working.

glade.pdt_motion_control.hal_led1
And
pdt_motion_control.hal_led1

As used in the picture in custom_postgui.ha, neither will boot Linux CNC and both give message pin doesn't exist

Thanks
Kent

Please Log in or Create an account to join the conversation.

HansU
Offline
Moderator

9 months 5 days ago #342093 by HansU

Replied by HansU on topic Gladevcp pin does not exsist

Please post your HAL file to be able to help you.

Please Log in or Create an account to join the conversation.

Moderators: HansU

Time to create page: 0.222 seconds