Bay Area consultant familiar with ProBotix/LinuxCNC

agrimani
Topic Author
Offline
New Member

7 months 4 days ago - 7 months 4 days ago #344895 by agrimani

Bay Area consultant familiar with ProBotix/LinuxCNC was created by agrimani

Am looking for some help to get a simple ProBotix-based small-format router up and running. Our office is in Novato, CA, 30 minutes north of San Francisco.
Please post any offers here, and we take the conversation off line.
Thanks!

Last edit: 7 months 4 days ago by agrimani. Reason: clarifying the region

Please Log in or Create an account to join the conversation.

andypugh
Offline
Moderator

7 months 3 days ago #344946 by andypugh

Replied by andypugh on topic Bay Area consultant familiar with ProBotix/LinuxCNC

I don't think they do consultancy, but you are very close to the Mesa Electronics HQ.

Please Log in or Create an account to join the conversation.

PCW
Offline
Moderator

7 months 3 days ago #344975 by PCW

Replied by PCW on topic Bay Area consultant familiar with ProBotix/LinuxCNC

Just asking specific questions on the forum may be enough to get you going.

Please Log in or Create an account to join the conversation.

agrimani
Topic Author
Offline
New Member

6 months 2 weeks ago #345576 by agrimani

Replied by agrimani on topic Bay Area consultant familiar with ProBotix/LinuxCNC

Thanks; am really looking for someone I can pay to configure this system, then help with programing of the router to make a number of parts.

Please Log in or Create an account to join the conversation.

Time to create page: 0.210 seconds