Highlighted gcode doesn't follow current position.

The is a minor thing that I hope is a simple fix.

The graphical display that follows the tool path is spot on with what the tool is doing. That's not a problem. What I noticed is the highlighted gcode shown isn't following the same position.
So if I tap a tool path line to highlight it in the grid of the graphic window it doesn't highlight that tool path in the gcode.
As you can see in the image I have the angled tool path highlighted which is supposed to be line 33, but in the gcode it's highlighting 29 which is the change in speed 5 lines prior.



A cursory search of the internet didn't reveal much other than recommendations to change g61,g64, but don't believe that has anything to do with this.

How do I correct this?

Thanks in advance.

What GUI?

3.4.9

TheTinkeringMechanic1 wrote:

3.4.9

That is most probably the kernel version, not the GUI.
What user interface on screen?
It seems like GmoccaPy.
Upload a picture of the whole screen.

Also, please post the gcode

If this isn't the version,  I don't know where it would be.

This is it.

After posting that image of the g code I believe I see it now. The % symbol is on line 5. So that would explain everything being off set considering the line is starting at 1...
I knew it had to have been something silly.

Update: That was it.... image missing /media/kunena/emoticons/grin.png

tommylight wrote:

Upload a picture of the whole screen.

Aciera wrote:

Also, please post the gcode

You did neither, seems you are hiding something...
Yet you ask us for help.

TheTinkeringMechanic1 wrote:

After posting that image of the g code I believe I see it now. The % symbol is on line 5. So that would explain everything being off set considering the line is starting at 1...
I knew it had to have been something silly.

Update: That was it.... image missing /media/kunena/emoticons/grin.png

Thank you for reporting back.