LinuxCNC Features - a kind of NGCGUI

Hello.

Ok, many thanks and sorry FernV.
Now i get it and can continue translating.
Many thanks again.

Kindy regards.

Hi Otto,

I finally reinstalled the first MB and CPU and removed the PCIe GC, using the on-board one and setting machine startup param isolcpus=1. I have now a decent performance. I made a thorough test and got MaxJitter of 37000 with the Athlon II X2. The new Athlon X4 with FM2 socket was not tested much, MaxJitter showing over 45000 (2950 for Athlon II) without any other application loaded and changing isolcpus=1 or 2 or 3 did not improve much.

Information about syntax highlighting and code folding is here forum.linuxcnc.org/forum/20-g-code/30552...h-code-folding#71379

Finaly I can now control the spindle speed of my mill through LCNC. I will be able to do more testing of my files before releasing.

Regards
Fernand

hello Fernand,

I recently discovered what embedded python can do, take a look at this:
forum.linuxcnc.org/forum/20-g-code/27040...r-lathes-first-tests

This could be used for some advanced pocketing generators and I have an idea how to do "draw" feature a lot more eficiently. What do you think?

Hi Mit

This is interesting indeed for lathe work. I also have some idea to make profile with Features also but it will be for later.

Development is going well and actual testing is well under way. I made a few videos and with a little more testing I will upload some preview of the next release. You should love it.

Regards
Fern

Hi guys

I just uploaded a preview video of the next release.



It is still a broken package with all the changes I have done, not ready to publish but this preview will give you a chance to evaluate and comment on the changes and submit your ideas.

Best regards
Fern

Congratulations FernV.
Seems so good with a very nice changes.

Kindly regards.