PathPilot 2.0.2 adding rtlib's

8 years 6 months ago #109578 by DaOne

Replied by DaOne on topic PathPilot 2.0.2 adding rtlib's

Pretty happy camper

Please Log in or Create an account to join the conversation.

8 years 6 months ago #109581 by dinkata

Replied by dinkata on topic PathPilot 2.0.2 adding rtlib's

thanks for file ,unzip ..copy/paste /v2.0.4/rtlib (foto)
but error xhc-hb04.tcl:81: Unknown command 'proc'

Please Log in or Create an account to join the conversation.

8 years 6 months ago - 8 years 6 months ago #109586 by emptyhb

Replied by emptyhb on topic PathPilot 2.0.2 adding rtlib's

@dinkata: can you confirm this method working normal?

example rtlib toggle2nist is added

Code:

loadrt toggle2nist names=tgn1,tgn2
addf tgn1 servo-thread
addf tgn2 servo-thread

the code above not work

but it work if using

Code:

loadrt toggle2nist count=2
addf toggle2nist.0 servo-thread
addf toggle2nist.1 servo-thread

All missing rtlibs from pathpilot have issues with "names" parameter

Last edit: 8 years 6 months ago by emptyhb.

Please Log in or Create an account to join the conversation.

8 years 6 months ago - 8 years 6 months ago #109588 by dinkata

Replied by dinkata on topic PathPilot 2.0.2 adding rtlib's

can you confirm this method working normal?

you want me to try?
unfortunately I do not have this component !
I have extra :
classicladder => work ok
charge_pump => work ok

Last edit: 8 years 6 months ago by dinkata.

Please Log in or Create an account to join the conversation.

8 years 6 months ago - 8 years 6 months ago #109589 by emptyhb

Replied by emptyhb on topic PathPilot 2.0.2 adding rtlib's

Can you try with flipflop? I can confirm all rtlibs can load with "count=n" parameter but if using "names", addf function will not work after.

Last edit: 8 years 6 months ago by emptyhb.

Please Log in or Create an account to join the conversation.

8 years 6 months ago #109591 by dinkata

Replied by dinkata on topic PathPilot 2.0.2 adding rtlib's

Okay, tomorrow

Please Log in or Create an account to join the conversation.

Time to create page: 0.153 seconds