How to add 80w laser diode to QtPlasmaC

More
15 May 2022 03:11 #242998 by aabtech
Hi, I have a working QtPlasmaC with mesa 7i92+BOB and am planning to add 80W Laser Diode which will be like a double head system for cutting plastic and wood for metal sign can anyone help me. 

Please Log in or Create an account to join the conversation.

More
15 May 2022 13:56 #243016 by tommylight
How?
Provide us with something, anything to go on.

Please Log in or Create an account to join the conversation.

More
15 May 2022 15:58 #243026 by aabtech
Ok, adding a laser diode to your plasma touch for engraving and cutting.

Please Log in or Create an account to join the conversation.

More
15 May 2022 16:53 #243029 by tommylight
You are not helping yourself ...
What laser? 80W Diode laser is very expensive. Is it a CO2 laser?
What control signals does it need to work?
Do you intend to use them both at the same time or in the same job, or separate?
etc, etc.
Since you do not give use info, take some pictures or videos, or use smoke signals, but give us some info.

Please Log in or Create an account to join the conversation.

More
15 May 2022 17:43 #243030 by robertspark


80w is not the output

it uses 2x7.5 laser diodes and a prism

use m62 and m63 to control it.

my plasma has a magnetic breakaway holder.... and I've got other devices I can attach to it (marker pen etc)

Please Log in or Create an account to join the conversation.

More
15 May 2022 17:48 #243031 by robertspark
I went with an M50 but on its own frame

shop.atomstack.com/products/atomstack-a1...1GwLVREaAr6UEALw_wcB

with air assist. works really well

I use it to cut paper or card or wood templates..... saves wasting steel....

does gaskets too :)

Please Log in or Create an account to join the conversation.

More
15 May 2022 18:32 #243036 by tommylight

does gaskets too :)

Now that is something i need for a local company, can you please share more info on what it can cut regarding gaskets?
Thank you.
New topic?

Please Log in or Create an account to join the conversation.

More
15 May 2022 19:15 #243041 by robertspark
will do. sep topic a bit later on as I'm out
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

More
16 May 2022 02:26 - 16 May 2022 02:29 #243063 by aabtech
Hi, tommylight the laser diode is a 80w and I want to add along side my QtPlasmaC  if possible.
Last edit: 16 May 2022 02:29 by aabtech.

Please Log in or Create an account to join the conversation.

More
16 May 2022 11:46 #243076 by tommylight
It can be added as spindle 2 or spindle 3 in QtPlasmaC.

Please Log in or Create an account to join the conversation.

Moderators: snowgoer540
Time to create page: 0.097 seconds
Powered by Kunena Forum