Replacing OpenPNP motion controller

Hallo everyone,

I've read some topics about the implementation of LinuxCNC as "motion controller" into OpenPNP.
I'm familiar with LinuxCNC and wanna use it for the complete motion of the Pick&Place machine.
However I need OpenPNP for the camera issue and other things.

Somehow it should be possible to set in OpenPNP the alternative to allow LinuxCNC to take care of the axis motion.

Does anybody know how to set OpenPNP in the right way ?

Thanks for sharing
Aronne

hi open pick and place is a stand alone up to 8 line picker and CAM placer with all nice feathers no need to position via G-code or wordlines
Why woudt you like to downgrade a fully visual system to a keybord/coordinate one

Hi

Coz I m using linuxcnc for other purposes.
I would need Open pnp for the camera essentially

Any idea how to implement linuxcnc into open pnp ?

hi the camview is 2 line in INI
then you are able to position with linuxcnc

ofcause to be setup first
A: sudo apt-get install qv4l2
in Terminal
qv4l2 CAM shoudt show up
sudo apt-get install python-opencv
sudo apt-get install v4l2-utils
sudo apt-get install v4l2ucp

there is a camview.py file in the samples to be editabel for userspecial

Appreciate the suggestion, thank you !

Will try the mods in a few days
Keep you posted

Cheers
Aronne

i'm using LinuxCNC for pick-and-place. vision is done in python using OpenCV in a modified camview python script. everything else is done by a bunch of g-code macros. of course it's no match for OpenPNP considering features, but gives me better control over motion..

github.com/yur7aev/linuxpnp