Woodpecker - 1080x1920 Portrait mode problems

Perhaps you need to replace sim_panel.ui with a file from the configuration.

hottabich wrote:

Why are there such difficulties.
 


 

Probably because Linux is still a mystery to me.

Copied the two files to /share/qtvcp/screens/woodpecker/, and copied sim_panel.ui to /qtvcp/panels/sim_panel/.

Next error:
Traceback (most recent call last):File "/home/mill/linuxcnc-dev/bin/qtvcp", line 481, in <module>APP = QTVCP()File "/home/mill/linuxcnc-dev/bin/qtvcp", line 287, in __init__window.handler_instance.initialized__()File "/home/mill/linuxcnc-dev/share/qtvcp/screens/woodpecker/woodpecker_handler.py", line 148, in initialized__self.init_utils()File "/home/mill/linuxcnc-dev/share/qtvcp/screens/woodpecker/woodpecker_handler.py", line 375, in init_utilsfrom facing import FacingModuleNotFoundError: No module named 'facing' 

Please describe your actions in order. I have linuxcnc installed from the official iso image and no problems.

Lcnc 2.9 RIP

• installed qtvcp from the thread pinned to the top of this sub-forum and selected development version ("2")
• qtvcp was installed in /linuxcnc-dev/share/, not usr/share
• downloaded the .zip file from your link
• unzipped to network drive
• copied unzipped folder to /linuxcnc/configs
• edited all instances of paths /jura/linuxcnc... to /mill/linuxcnc
• copied (new) woodpecker.ui and woodpecker_handler.py from linuxcnc/configs to /linuxcnc-dev/share/qtvcp/screens/woodpecker
• copied (new) sim_panel.ui from linuxcnc/configs to linuxcnc-dev/share/qtvcp/panels/sim_panel
• started lcnc using launcher: /home/mill/linuxcnc-dev/scripts/linuxcnc

Lcnc 2.9 RIP. So linuxcnc did not install. Therefore, I cannot help.

Thank you very much for your time.  I suspected - as usual - it was something on my end.