My Grizzly G0602 Lathe

So much stuff to do and so many parts. I am in the process of figuring out how I am going to
build the electrics cabinet. I already have the mechanicals and I will be doing a Video early 2021
of what I have so far. I am taking some time off for some much needed R and R . I hope 2021
is much better year then 2020 has been.

So what do I have planned so far.

well after banging my head against a sledge hammer called Linuxcnc 2.8 with Debian Buster and the 7i76e Mesa card
I somehow emerged successful by switching to Linux Mint 19.3 instead. I will have a video by the end of this week
of a parts overview and progress so far. Stay tuned I get the feeling this project is going to fight me every step of the way.


Wait I think they all do.

You have a very short list of things to do, want some of mine ?

my1987toyota wrote: well after banging my head against a sledge hammer called Linuxcnc 2.8 with Debian Buster and the 7i76e Mesa card
I somehow emerged successful by switching to Linux Mint 19.3 instead. I will have a video by the end of this week
of a parts overview and progress so far. Stay tuned I get the feeling this project is going to fight me every step of the way.


Wait I think they all do.

Just curious. How did you install 19.3? did you use Tommy's shortcut. I did this once before but failed last night.

Hey rodw . I have a copy of the 19.3 with the linuxcnc as a live install iso . on a disk.

link removed due to it no longer working.