Error with 5_axis_gantry simulation
- ArcEye
- Offline
- Junior Member
Less
More
- Posts: 25
- Thank you received: 761
09 Apr 2013 20:58 #32482
by ArcEye
Replied by ArcEye on topic Error with 5_axis_gantry simulation
Think the best I can suggest is that you PM Chris as user cradek or try to catch him on the IRC
He is a busy man, but hopefully will be able to put you on the right track far quicker then I can, as
I have no experience of vismach or 5 axis gantry
regards
He is a busy man, but hopefully will be able to put you on the right track far quicker then I can, as
I have no experience of vismach or 5 axis gantry
regards
The following user(s) said Thank You: mariusl
Please Log in or Create an account to join the conversation.
- mariusl
- Topic Author
- Offline
- Platinum Member
09 Apr 2013 21:22 #32483
by mariusl
Regards
Marius
www.bluearccnc.com
Replied by mariusl on topic Error with 5_axis_gantry simulation
I will do that. Thanks for the help anyway.
Regards
Marius
www.bluearccnc.com
Please Log in or Create an account to join the conversation.
Time to create page: 0.075 seconds