Kitamura Zero with Yaskawa Varispeed 626 MV3 C Spindle Drive Parameters

I have a 1994 Kitamura Mycenter Zero with a Yasnac mx3 controller.
It has a Yaskawa Varispeed 626 mv3 C spindle drive,which stopped working—it’s completely dead. The repair technician said it would cost 2,000–3,000 € to repair. I found a used drive online for significantly less than the repair costs, but now here’s the problem: I bought the milling machine used and only received one manual and no parameters. (I’ve backed up the Yasnac controller’s parameters.) And since the old Yaskawa Varispeed is dead, I can’t get the parameters from it. Now I’m wondering if there’s anyone in the whole world who has a backup of the Yaskawa Varispeed 626 mv3 C parameters for the Kitamura Mycenter Zero, or knows where I can get one. Of course, I’ll pay for it.

I mean the MV3C. The “C” stands for “compact”; it's a smaller model and is only available in 200V. The MV3 is available in both 200V and 400V.