Debian 11 RTOS on Beckhoff CX2030

Well I have an update.  I retried the Grotius ISO just did some apt update - apt upgrade.  Copied the  /boot/System.map-5.10.0-5-rt-amd64 to /usr/src/linux-headers-5.10.0-5-rt-amd64/System.map.  CCAT installed.  Well BBAPI did not go as well.  I have a screenshot of the new test.

Mike,

I looked up where it is monitored on Etherlab and there is a chance the BBAPI is not going to work at the moment.  I don't know this for a fact but happen to see it failed all the way across for the different architectures.  Have a look at this link

Show science:EtherLab - openSUSE Build Service

Was working on something else and happen to see the BBAPI at the top of the list and remembered you were trying to get it working.


Robert

Hello,i've followed this  thread and i've got the CCAT driver installed so far, but i was realy confused i've got so many warning while compailtion, so what...
The question is how do i mount or assgin the

Beckhoff pci ethcatmaster{(08:00.0 Unassigned class [ff00]: Beckhoff GmbH Device 5000 (rev 0)) => which seem is the interface for the onboard KL-modul of the plc/ipc }

as master device to the ethercat stack?
i add a copy of my terminal log

the actual master you see is an Beckhoff CX2500 module and runs good so far.

might anyone has an idea

kind regards,
Christoph

Get fixed this from here forum.linuxcnc.org/ethercat/53739-etherr...automatically#309270