LinuxCNC-RIO - RealtimeIO for LinuxCNC based on FPGA (ICE40 / ECP5)

Zayoo
Offline
New Member

2 years 10 months ago #287291 by Zayoo

Replied by Zayoo on topic LinuxCNC-RIO - RealtimeIO for LinuxCNC based on FPGA (ICE40 / ECP5)

Thank you for help.
Currently my setup work on bench with serial communication of the box, just small adjustment of baud rate in rio.v and adjusting port in rio.h!
Still lot to do.

The following user(s) said Thank You: meister

Please Log in or Create an account to join the conversation.

meister
Topic Author
Offline
Platinum Member

2 years 10 months ago #287875 by meister

Replied by meister on topic LinuxCNC-RIO - RealtimeIO for LinuxCNC based on FPGA (ICE40 / ECP5)

New Video:

The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

meister
Topic Author
Offline
Platinum Member

2 years 10 months ago #287876 by meister

Replied by meister on topic LinuxCNC-RIO - RealtimeIO for LinuxCNC based on FPGA (ICE40 / ECP5)

Zayoo wrote:
Thank you for help.
Currently my setup work on bench with serial communication of the box, just small adjustment of baud rate in rio.v and adjusting port in rio.h!
Still lot to do.

Hi Zayoo,
nice !
Are you using a Raspberry with Serial on GPIO or an USB-Serial-Adapter ?

Please Log in or Create an account to join the conversation.

meister
Topic Author
Offline
Platinum Member

2 years 10 months ago - 2 years 10 months ago #288277 by meister

Replied by meister on topic LinuxCNC-RIO - RealtimeIO for LinuxCNC based on FPGA (ICE40 / ECP5)

got it

Wiznet W5500 without softcore, direct on the FPGA:

youtube.com/shorts/xcC7Dun8vxE

testet on IceBreaker and MAX10, but i think it should run on all FPGA's,
nothing special.

Last edit: 2 years 10 months ago by meister.

Please Log in or Create an account to join the conversation.