G93 strange behavior

I am using 2.9.

I have never compiled from source but am not afraid of learning the process. I usually take the easy path and stick with stuff that I can just install because of limited time. However, this bug has been giving me trouble and would be worth learning to compile from source in order to fix it.

nwallace wrote:

I am using 2.9.

 

In that case you should be able to just update and get this fix, assuming it's from a Buildbot .deb. 
 

I just installed it in debian bookworm via apt. I don't know if that means it is through buildbot. I assume no because linuxcnc does not appear in the upgradable list after an apt update.

The most recent bookworm package dates from 2023 02 08. So you won't get the fix that way.

However, if you download and install this .deb file then you will get the fix.
buildbot2.highlab.com/debian/dists/bookw...g760707368_amd64.deb

Thanks!

If you include the X axis in your G93 line, your issue will go away.
If you have a G93 post for fusion 360, I would be keen to see it?