Axis 2 - touchscreen version of old friend

    After some thought I Can also rework layout if screen is less than say 640 by 480 for these very inexpensive touch screenshey Phil C or  John Thornton - can we push this to master??

Yes would be great to have this in master. Axis 2 as name for this fits well I think as it is a further development of Axis.

But it would also be nice to have an Axis version that looks almost like the normal Axis but scalable down to 800x480 like one of these here: forum.linuxcnc.org/21-axis/38188-solved-...w-usercommand#169617

And maybe also a "Axis small touchy" like this: forum.linuxcnc.org/21-axis/38188-solved-...mand?start=20#217855
Hard to decide, because they are all are looking great.

Maybe first could be named named axis_small and latter axis_touch(y) ?

What do you think?
 

zack wrote:

hey Phil C or  John Thornton - can we push this to master??

Possibly. My only concern would be ongoing support.

if any one is willing to work on the qt version of AXIS - I would maintain it afterwards.

i will be around for a long while and will support it but not every week maybe monthly

Hey, I tried installing this, but it looks like you are using a pretty old version of 2.9 , so glcanon breaks, and axis breaks. I recommend using usercommand file if possible.