Jogging with hardware buttons

More
27 Nov 2022 06:12 #257722 by JPL
Replied by JPL on topic Jogging with hardware buttons
(extra) long shot, but could this be as simple as because ALL axis needs to be homed first ?
(Been there a while ago ... )
 

Please Log in or Create an account to join the conversation.

More
27 Nov 2022 18:41 #257751 by HansU
Replied by HansU on topic Jogging with hardware buttons
I assumed he has homed his machine, because he said he is able to jog with the GUI buttons...

Please Log in or Create an account to join the conversation.

More
28 Nov 2022 13:43 #257856 by Epicenter02
Gentleman,
I want to say Thank you to everyone through the time helping me out to set up my machine. The thing is running at the moment, all buttons are working fine with the commands discussed here. I can select between the different axis and jog them in both directions with no issues. A button for rapid jogging was also assigned and everything is working well. The issue was from my side and I had some omissions myself, but things turned out great!
Thank you for the time and effort spent!
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

More
28 Nov 2022 18:13 #257876 by HansU
Replied by HansU on topic Jogging with hardware buttons
What was the error? Maybe good to know for other people dealing with the same problem...

Please Log in or Create an account to join the conversation.

Time to create page: 0.171 seconds
Powered by Kunena Forum